Saw, drilling, and dowel driving automatic machine

Koch SBD -B

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 Lredpfx Aewd Rlfeb Aeu W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Condition: excellent (used), Loos 1000kW heating container emergency heating with gas burner Conversion to oil or biogas possible Ledpfx Ajy Evltob Asru

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Lsdpjympx Uofx Ab Asru

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Lrjdpjq Nmw Iofx Ab Aju

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Lredpfxom Rhfdj Ab Asu

Condition: used, Year of construction: 2005, No. 3256 CNC machine for pallet production Sysmathick RPA9 + stacker Used, year of construction 2005, machine already dismantled Machine for assembling wooden parts with top and bottom nailing The RPA9 is a machine with circulation chains for the production of pallets in standard dimensions according to four templates (maximum 1600 x 1400 mm LW) Operation via a touchscreen Format changeover within a few minutes Two programming methods: - digital programming via PC (input of coordinates) - Manual programming via touch screen Storage of tens of thousands of products Automatic control of the distance between the heads (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top 3x N58 & 3x N400, bottom 3x N80) High nailing frequency (one row of three nails per second) Nailing of multi-level pallets thanks to the heads Equipped with pneumatic cylinders Pneumatic pressing of the boards during assembly Minimum pallet dimensions 600 x 300 mm LW Maximum pallet dimensions 1600 x 1400 mm LW Maximum template dimensions 1700 x 1600 mm LW Maximum nailing capacity 1600 x 1400 mm LW Maximum pallet height 190 mm Minimum pallet height 110 mm Machine capacity 60 - 200 pallets/hour Sale on behalf of customer, ex location near 51371 Leverkusen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Lrsdpfsx Dddxex Ab Asu Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Year of construction: 2008, functionality: fully functional, Production line manufactured by a Canadian company Brunette, which can be described as very powerful and durable. The offer includes a log debarker with feeding tables, bark collection conveyors, as well as a chipper with 630kW installed capacity and a double screw unloading conveyor. Lredevu D Dwspfx Ab Aju

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Lsdpfx Aboxz Hh Uj Asru Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: used, Year of construction: 2023, functionality: fully functional, CLT Cross-Laminated Timber (CLT) production line with CNC machining center Capacity: approx. 25,000 m³/year (2-shift operation) Functional Description / Scope of Supply: - Longitudinal lamella feeding: Loading – Singulation Ledsxzy N Sspfx Ab Aeru - Cross lamella feeding: Loading – Vacuum destacking – Feeding to planer - Formation and buffering of longitudinal layers: Longitudinal layer preparation and discharge station - Formation and buffering of cross layers: Two-stage cross layer buffer – Cross layer discharge station - Layup and gluing area: Vacuum layup gantry – Adhesive application gantry – Layup table - CLT press: TimberPress X331 - Outfeed area after CLT press: Cross transfer carriage to buffer stations, Reichenbacher system and discharge station with flipping unit - Reichenbacher CNC machining center CLT blanks (LxWxH): Min.: 6,000 x 2,000 x 60 mm Max.: 12,040 x 3,140 x 350 mm 3–9 layers Raw material: Longitudinal layers (LxWxH): Min.: 6,000 x 100 x 20 mm Max.: 12,040 x 280 x 50 mm Cross layers (LxWxH): Min.: 2,000 x 105 x 23 mm Max.: 3,140 x 285 x 53 mm Price and further information available on request.

Year of construction: 2005, condition: excellent (used), The subject of the auction is the sawmill line BRODPOL The line consists of a log prefeeder plus a cascade, an input feeder, a BRODPOL TT5/500/320/G circular sawmill with a centering device and a receiver, and a distribution table. - diameter of the processed log 100 - 320 mm - length of processed log 1250 mm - 6000 mm Lrsdpol H Hy Hefx Ab Aeu - diameter of circular saws (only) 500 mm - maximum number of saws on the spindle 5 pcs. - feed speed 10 - 28 m/min. - power of main motors 55 kW + 75 kW Hcwgak9s - required connection of pneumatic supply 6 atm. - capacity up to 20 m³ per hour of operation