Used Edm Drilling Machine for sale (65,342)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total length: 1,050 mm, total width: 650 mm, workpiece height (max.): 250 mm, AGIECUT Excellence 3 eCut Year of manufacture: 2005 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged tank machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient machine setup Including AGIESETUP 3D AGIEVISION control system AGIE IPG generator with eCut technologies Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional services available on request: - Transport - Commissioning - Chiller unit - Clamping devices Pgjdpfeyu Iq Esx Ahvei

Condition: used, Year of construction: 2022, drilling capacity steel/cast iron 50/60 mm throat max. 1600 mm workpiece height max. 1300 mm throat min. 300 mm spindle taper: MK5 Pgedpfx Aoyuy Szohvji drilling depth in one stroke 300 mm vertical adjustment of arm 800 mm base plate surface area 1600 x 800 mm spindle turning speed range 125- 1250 U/min total power requirement 3,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,4 x 1,2 x 2,7 m feed per revolution 0,025- 1,38 mm/r Without table.

Condition: used, Column Drilling Machine IXION - MAXION Type Unimax 3 Podpfx Aheykca Tevegi Serial No. 203063 Year of manufacture: 2009 Drilling capacity: 30 mm Spindle taper: MK 3 – short quill Throat: 260 mm Quill stroke: 125 mm Table size: 360 x 500 mm Column diameter: 110 mm Spindle speed: 80 - 3200 rpm, infinitely variable Motor power: 0.8 / 1.5 kW Power supply: 400 Volt, 50 Hz - Spindle speed adjustable via 2 V-belt stages, 2 motor speeds and stepless variator drive - Digital speed display - Motor speed setting 1 for clockwise and counter-clockwise operation, setting 2 for clockwise operation only - Drill table height adjustment via hand crank - Drill chuck RÖHM Ø 1 to 16 mm - Emergency stop button Required space (L x W x H): 800 x 530 x 1800 mm Weight: 230 kg Very good condition

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Pjdpfxsdzp S Ne Ahvsgi Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Pgedpfsywnr Njx Ahvoi Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: ready for operation (used), Year of construction: 2001, Ok machine Pgedpfx Ajywl E Hohvji

Condition: used, Year of construction: 2010, Used machine from 2010, operational, requires inspection and maintenance. Pgedpfxoywhcnj Ahvsi

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 465 mm, spindle speed (max.): 3,260 rpm, spindle speed (min.): 225 rpm, quill stroke: 115 mm, quill diameter: 80 mm, Universal precision drilling and milling machines with gear drive Year of construction: 2019 Excellent condition - High concentricity accuracy thanks to tapered roller bearings, ≤ 0.015 mm measured at the quill Pgsdpfxoywgdke Ahvoi - Oil-bath gearbox with ground, hardened gears - Operator panel with user-friendly, dirt- and water-resistant membrane keypad - Rotary pressure switch on the operator panel for setting drilling depth in either mm or inches, including zeroing function - Easily readable quill position indicator on the milling head - Drilling depth stop - Forward/reverse operation - Tapping mode - Electrically adjustable milling head height - Fine hand feed - Tiltable gearbox head ± 30° - Z-axis with stainless steel bellows cover - Adjustable and resettable feed spindle backlash - Two-stage industrial motor plus 6 additional gearbox speeds The drilling and milling machine is in excellent condition Additionally included: 4 BT40 tool holders, machine base, LED work light, custom control cabinet with inverter for electronic fine height adjustment of the Z-axis The machine can be inspected and tested on-site without obligation

Condition: excellent (used), Year of construction: 2014, Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Psdpfxsfmdcqj Ahvegi Minimum dimension: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1989, Offered from an insolvency is a ready to use tapping machine Manufacturer Fleet Model SB 15 GL year of manufacture 1989 Machine No. 34177063 Technical data: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Throat 200mm Chucks Bilz WFP 1 + inserts drill chuck Röhm 0-10mm Foot switch Digital display Pinol stroke Single continuous cycle Pgodpfjfm S Nasx Ahvoi Emergency stop Speeds from 80-3150 rpm 380 volts Engine power 0,75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs. Lead screw --pitches-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions weight approx. 200kg

Condition: used, spindle mount: MK 4, drilling depth: 50 mm, overall weight: 2,300 kg, Radial Drill Brand: Foradia Model: GH 50-1000 Serial No.: 5080 Drilling capacity: 50mm Maximum radius: 1,135mm Minimum radius: 425mm Longitudinal head travel: 700mm Column diameter: 250mm Usable arm from column edge: 300mm Vertical arm stroke: 620mm Minimum spindle-to-base distance: 300mm Maximum spindle-to-base distance: 1,145mm Podpfx Ahsymw I Devegi Spindle stroke: 225mm Morse taper: 4 Speeds: 12 (35-1460rpm) Automatic feeds: 6 (0.05-0.35) Motor power: 3.5 + 1.5 Hp Weight: 2,300kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Pgodpfx Aoyuqmijhvji Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 80,000 h, machine/vehicle number: 571718, Ingersoll Gantry 800 solid electroerosion machine. Curve: (X,Y,Z,C) 550 / 850 / 450 mm , 360 degrees Machine dimensions: 2,4 x 2,65 x 2,68 m Axis resolution: 0.001 mm Dielectric tank stroke: 440 mm Number of electrodes in magazine: 20 Maximum electrode mass allowed: 15 kg Multipulse generator: max 70A The machine is in working condition. If needed I can provide a video with it machining. I have the user and maintenance manuals, machine parameters and many accessories: EROWA device, electrode holder, tweezers. For more pictures, including a video, please contact me. Pgjdpfx Aep Eclrohvji The machine will come with a lot of accesories. Transport is not included in the price. The price is without VAT.

Condition: good (used), Year of construction: 2001, Drilling capacity: 40 mm Spindle taper: MK 4 Arm reach: 300 - 1300 mm Weight approx.: 2300 kg Pgedoyud Tvopfx Ahvoi Accessories / Special features: - Central clamping - Motorized vertical travel - Right-/left-hand rotation - Cube table - Coolant pump - Lighting - CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Psdpfxsxd Ruwe Ahvjgi Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Pgodpfxeyucaho Ahvei Condition: Very good, used but like new Available immediately from stock.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, Z. Bavelloni VT1250SA + L automatic horizontal drilling machine with 2 drilling heads (upper and lower). The machine is in very good working condition, equipped with a laser for precise hole positioning and a switch for spindle speed adjustment. It will be delivered with a set of diamond drilling tools. The machine features a water tank and water pump. Podpfx Ahsyghh Usvogi

Condition: used, - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 - Table length [mm]: 2200 - Table width [mm: 1500 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 - Z-axis travel [mm]: 1000 - Spindle diameter [mm]: 100 Pjdpfx Aswfpbbshvjgi - Options: Digital readout Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand Pgodjfx U D Ajpfx Ahvji - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 1981, Working width 1200 mm Power (kW) 6 kW Working depth 130 mm Thickness 50 mm Radial drilling machine, radial drilling machine Manufacturer: MAS Kovosit Type: VO 50 Arm length: 1600mm Pgjdpfswnhcijx Ahvoi Drill length: 1200mm Drill depth: 130mm Capacity: 50 / 60mm Spindle speed: 28-2500 rpm Intake: MK6 Motor power: 6kW T-slot bottom: 1500x1000mm Machine-afmeting: 2900x1200x3000mm - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 50 / 1600 - Power [kW]: 6 - Arm length [mm]: 1600 - Drilling depth [mm]: 130 - Drilling capacity [mm]: 60 - Tool holder: MK6 - Min. spindle speed [rpm]: 28 - Max. spindle speed [rpm]: 2500 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1973, total width: 720 mm, total length: 2,300 mm, total height: 2,700 mm, Empty weight: 3.000 kg - Year: 1973 - Documentation available: Yes - CE certificate present: No - Serial number: 95361 - Drive system: Conventional - Power [kW]: 3.5 - X-axis travel [mm]: 1000 - Table length [mm]: 750 - Table width [mm]: 600 - Drilling depth [mm]: 330 - Drilling capacity [mm]: 40 - Max. Reach [mm]: 1300 - Tool holder: MK4 - Min. spindle speed [rpm]: 28 - Max. spindle speed [rpm]: 1120 - Transport dimensions: 2300mm x 720mm x 2700mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Podpfx Ahex Igczsvegi Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 2181 - Drive system: Conventional - Power [kW]: 4 - X-axis travel [mm]: 1600 - Table length [mm]: 1020 - Table width [mm]: 750 - Drilling depth [mm]: 130 - Drilling capacity [mm]: 2 - Max. Reach [mm]: 1600 - Min. spindle speed [rpm]: 28 - Max. spindle speed [rpm]: 2500 Psdownh Rtjpfx Ahvsgi Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 1,000 mm, total length: 2,200 mm, total height: 2,500 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 6 - Y-axis travel [mm]: 1000 - Table length [mm]: 1300 Pjdpfx Ahjwnilxevogi - Table width [mm]: 600 - Drilling depth [mm]: 150 - Drilling capacity [mm]: 32 - Max. Reach [mm]: 1000 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 2650 - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Dowel insertion tool for 8 x 40 mm dowels The following issues were identified during testing: - Glue specification missing - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field - SPS module Beckhoff repeatedly fails. Machine must then be restarted. Pjdpeytq R Ejfx Ahvsgi - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: excellent (used), see pictures; further extensive clamping devices available! Pedpfxjha U U Ro Ahvjgi Please contact us if you are interested !