Used Edm Drilling Machine for sale (84,602)

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, AGIECUT Progress V2 Year of manufacture 2009 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator with power module AGIEVISION control unit Knjdpfx Aovax Iujffsf Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 Knedpjvtm Ayefx Affof pneumatic hold-down device, pressing device, stop rulers

Year of construction: 1997, condition: ready for operation (used), General Data Measurements width 2610 Measurements depth 3270 mm Measurements height 2240 mm Machine weight 2600 kg Control Unit Model System 16-WB Brand FANUC Main Drive Max taper angle ± 30 degrees/80 mm (option ± 45 degrees/40 mm) Number of axis 5 Movement X-Axis Movement 520 mm Y-Axis Movement 370 mm Z-Axis Movement 300 mm (275 mm in water bath) U-Axis Movement ± 60 mm W-Axis Movement ± 60 mm Workpiece Workpiece X 790 mm Workpiece Y 730 mm Workpiece Z 275 mm Workpiece weight 650 kg (with coaxial spindle), 450 kg (with water bath) Knsdjx Imp Ispfx Affsf Table Outer length 750 mm Outer width 590 mm Additional Equipment Bedra wire unwinding device BAS 45/100E (to the left of the machine), capable of handling wire spools weighing up to 45 kg This 5-axis FANUC Robocut Alpha 1C erosion machine was manufactured in 1997. It features a coordinate travel of 520 x 370 mm on the X and Y axes, and a Z-axis adjustment of 300 mm. The machine can handle a maximum workpiece weight of 650 kg and offers a rapid traverse of 900 mm/min. Ideal for precision erosion tasks, the FANUC Robocut Alpha 1C machine we have for sale. Contact us for further details regarding this erosion machine. Application Types EDM

Condition: used, Year of construction: 1960, arm length 1600 mm Knedpfx Afex Ik Unjfjf tool adaptor ja fabric-no. 9787 weight 4,6 t with drill cube

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Specially designed for staircase construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Inclined doweling and baluster drilling can be easily performed using the swiveling drilling unit. • Reversible pole motor, two speeds • Motor power 1.0 / 1.5 kW, 1,400 and 2,800 rpm • Convenient handle switch for starting the motor • With Röhm two-jaw chuck 1 – 20 mm • Linear laser for precise positioning of the workpiece • Drilling unit swivels 65 degrees to the left and right Kedpfx Ajxmatnoffjnf • Pneumatic adjustment of working height: doweling on two levels without repositioning • Desired drilling heights can be set for each drilling level using a digital counter, switching is pneumatic from the front • Cross adjustment 340 mm, continuously variable or in 12 mm increments using a detent rail • Pneumatic clamping possible at any position, operable from the front • Maximum height adjustment approx. 100 mm above table height • Drilling stroke approx. 200 mm • 2 pneumatic workpiece clamps, 1 clamping column can be repositioned to the front • 2 swiveling workpiece supports • Extraction funnel • Center stop + 1 side stop • Fixed mitre stop • Length stop as a round bar • Set of drill bits • Operating manual • CE marking • The machine has been partially repainted due to existing paint splashes. • Pneumatic hoses have been replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse; see "further offers from this seller."

Condition: good (used), Code: 0198 Brand: SCM TECNOMAX Model: MB 21 - CE Standard Multiple boring machine with 21 spindles for furniture, custom-made furnishings, kitchens, bathroom furniture, panels and various - CE Standard Kedpfxexbpbqe Affjnf Technical data: 21 quick-release spindles Spindle centre distance mm 32 Worktable height mm 900 Worktable dimensions mm 905 x 372 Max tool diameter mm 40 Max drilling centre distance mm 640 Max drilling head stroke mm 70 Motor power Kw 1,8 Min/max panel thickness 10/85 mm Manual movement for tilting the operating unit N°2 pneumatic clamps Side guide with stops Compressed air 6 bar Overall dimensions mm 1000 x 800 x 1300 h Weight kg 273

Condition: used, Year of construction: 2006, total width: 1,100 mm, total length: 3,100 mm, total height: 1,700 mm, - Year: 2006 - Documentation available: No Knodjx Ig H Tspfx Affof - CE certificate present: No - Serial number: 466 - Main motor power [kW]: 1.1 - Number of spindles [pcs]: 3 - Max. height adjustable [mm]: 120 - Table length [mm]: 3100 - Table width [mm]: 700 - Voltage [V]: 400 - Current consumption [A]: 2.8 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3100mm x 1100mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer is an equipment package. The following items and options are already included in the price: - OPTImill MB 4 Optimum precision drilling and milling machine Ksdpfxju R Tfte Affsnf - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg Knodpod Supgefx Affof

Year of construction: 2000, operating hours: 4,800 h, condition: ready for operation (used), General Data Machine weight 1200 kg Measurements height 2000 mm Dimensions Machine Length 3200 mm Knsdpfox H U Ebjx Affjf Control Unit Brand FANUC Model 18i-W Main Drive Number of axis 5 Movement X-Axis Movement 320 mm Z-Axis Movement 180 mm Y-Axis Movement 220 mm This 5-axis FANUC ROBOCUT α-0iA was manufactured in 2000. It features a travel distance of X-axis 320 mm, Y-axis 220 mm, Z-axis 180 mm, U-axis 120 mm, and V-axis 120 mm. With a maximum workpiece weight of 500 kg and total power consumption of 13 kVA, it's equipped with a Fanuc 18i-W control system. Consider the opportunity to buy this FANUC ROBOCUT α-0iA wire edm machine. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 1969, arm length 1600 mm taper MK 5 Ksdpfx Aox H Txteffsnf Würfel

Condition: new, Year of construction: 2025, Continuous/Standard drilling capacity (mm): 20/23 (in E335/ST60) Tapping capacity (depending on pitch): M12 Spindle: MK II Spindle speed (stepless): 40–4000 rpm Knsdoir Ir Topfx Affof Drilling depth (mm): 100 Throat (mm): 240 Column diameter (mm): 82 Usable work surface (W x L) (mm): 340 x 280 T-slot size (arm), spacing (mm), width dimensions (mm): Number: 2, 125, 13/26 Speed display: Digital Drill depth display: Digital Drill depth stop: quick-adjustable stop ring Feed (mm/rev): manual Table height adjustment via rack and pinion Motor: three-phase 400V with frequency inverter (kW): 1.5 Distance spindle/work surface (mm): 160 – 880 Machine dimensions without packaging (mm): 355 x 705 x 1825 Machine dimensions with packaging (mm): 572 x 936 x 2142 Weight (kg): 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically angled front LED lighting Quick-adjust and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop impact button Thermal overload protection Spindle stop Drill guard with electrical safety interlock Connection cable with CEE plug Optional accessories: Drilling package 3 consisting of: - Machine vice [Felix] 2.0 100 mm - Keyless drill chuck 3–16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 €470.00 3-year warranty for single-shift operation Free delivery NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK US FOR AN OFFER!

Condition: used, Year of construction: 1973, total height: 2,700 mm, total width: 720 mm, total length: 2,300 mm, Empty weight: 3.000 kg - Year: 1973 - Documentation available: Yes - CE certificate present: No - Serial number: 95361 - Control: Conventional - Motor power: 3.0kW - Drilling depth: 330mm - Spindle speed max.: 1120rpm - Model: iaalboormachine - Tool holder: MK4 - Table width: 600mm - Table length: 750mm - Drilling capacity: 40mm - Travel X: 1000mm - Spindle diameter: 5mm - Travel Z: 900mm - Max. reach: 1300mm - Spindle speed min.: 28rpm - Transport dimensions: 2300mm x 720mm x 2700mm (l x w x h) - Transport weight [kg]: 3000kg Knsdpfxsx Igcze Affsf - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, GANNOMAT Compact 30 hole drilling machine - used - Kedpfjwmmt Rjx Affenf pneumatic clamps, foot control, 2 drilling beams with 15 spindles each ----- Technical specifications ----- Number of spindles: 30, Drill spindle spacing: 32 mm, Motor power: 2 x 0.75 kW, Voltage: 400 volts, Pneumatic connection: 6 bar, Dimensions without stop ruler: 850 x 1,100 mm, Weight: 240

Condition: good (used), Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg Kedpfsb A Hd Hex Affjnf

Condition: excellent (used), operation weight: 21,000 kg, Year of construction: 2008, operating hours: 16,850 h, Equipment: air conditioning, Sandvik DP1100 Year : 2008 Ksdpfex Nh Tdex Affenf operation hours: 16.850 hrs Hammer hours: 8.180 hrs ROPS Airco Back drive camera incl. drill rods 1 × drill hammer CAT engine CE U/C : 60-70% good operation weight : 21 to

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Knjdsxwaz Hjpfx Affsf

Condition: new, Year of construction: 2025, Dauer-/Normalbohrleistung 18/20 mm Gewindeschneidleistung M12(steigungsabhängig) Spinde MK II Bohrtiefe 100 mm Ausladung 240 mm Säulendurchmesser 82 mm Nutzbare Arbeitsfläche B x L 340 x 280 mm T-Nutengröße (Arm), Abstand (mm), Abmessung Breite (mm) Anzahl 2, 125, 13/26 Drehzahlanzeige: Digital Bohrtiefenanzeige: Digital Bohrtiefenanschlag: schnell verstellbarer Anschlagring Bohrvorschub von Hand Tischhöhenverstellung mit Zahnstange Motor Drehstrom – frequenzgeregelt, 230 V, 0,75 kW Spindeldrehzahlen stufenlos 30 – 3000 1/min Tischarbeitsfläche: 155 - 415 mm Fußarbeitsfläche: 155 – 550 mm Maschinen-Abmessung: 355 x 705 x 1065 mm Gewicht: 170 kg Zubehör Optional: Bohrpaket 3: mit [felix] 2.0 100 Kjdpfxji Azzks Affjnf Maschinenschraubstock Flott [felix] 100, Schnellspannbohrfutter 3-16 mm (Genauigkeit 0,17 mm), Kegeldorn MK 2 B18 und Reduzierhülse MK 2 auf Mk 1 491,00 € Werksgarantie: 3 Jahre Frei Haus einschliesslich Verpackung (nur Deutschland ) Lieferzeit: sofort ab Lager

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 2,340 rpm, spindle speed (min.): 32 rpm, spindle mount: MK 4, throat depth: 293 mm, quill diameter: 72 mm, quill stroke: 145 mm, total length: 1,340 mm, total height: 2,050 mm, table width: 225 mm, total width: 1,280 mm, table length: 800 mm, drilling capacity: 50 mm, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, DRO on 3 axis, drilling capacity Ø 50 mm, motor 2,2 / 3,0 KW, table size 800x225 mm, spindle speed 32-2340 rpm stepless, MT-4, el. tapping device, machine light, coolant device, dimensions 1340x1280x2050 mm, weight ca. 780 kg Knjdpewn E Sbefx Affof

Condition: good (used), functionality: fully functional, Radial Arm Drilling Machine, CZ production, with few boxes of various drills and parts, solid and very heavy. Kjdpfx Afsxfda Aofjnf

Condition: good (used), Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm Ksdpfx Ajb A Idyeffjnf -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Year of construction: 2000, condition: ready for operation (used), Main Drive Number of axis 5 Movement X-Axis Movement 320 mm Kodpfxox H A Nue Affonf Z-Axis Movement 180 mm Y-Axis Movement 220 mm This 5-axis FANUC Alpha 0iA wire EDM machine was manufactured in 2000. It features X, Y, U, V, and Z axes with a maximum travel of 320 mm, 220 mm, 120 mm, 120 mm, and 180 mm respectively, all at speeds up to 900 mm/min. It can handle a workpiece mass up to 500 kg and has a machine mass of 1.2 tons. Power capacity is 13 KVA. Consider the opportunity to buy this FANUC Alpha 0iA wire EDM machine. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: Kodpfxexnlflo Affenf - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, bore capacity in steel (diameter) 40 mm throat 385 mm Kjdpfx Afex H Ak Sjfsnf bore stroke 200 mm spindle taper MT 4 turning speed range 61-1169 U/min table: 470 x 560 mm weight of the machine ca. 700 kg dimensions of the machine ca. 900x800x2000 mm

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, GF AgieCharmilles Classic V3 Year of manufacture: 2006 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-Axis Travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.20 µm Knodpfx Afsx Hzvyjfof Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine has already been cleaned, overhauled and tested by us. We are happy to perform a customized test cut for you. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.