Used Edm Die Sinking Machine for sale (66,469)

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Rjdpfxox Ndu Do Aahow Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm Rjdpfxeytkdrj Aahew NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Condition: ready for operation (used), functionality: fully functional, SASPI GV3-20 Threaded diameter M4-M12 Shaft length under head 150 mm Rodpoxv Si Tefx Aahew Max threaded length 130 mm Production rate 85-220 parts/min weight 4400 kg motor power 14 KW Condition is very good, ready for production

Condition: ready for operation (used), functionality: fully functional, SASPI GV4-30 Min / max threaded diameter M4 / M14 Min / max threaded length 10-150 mm Motor power (ca) 32 kW Production speeds (ca) 50-200 parts/min Ready for production! Redpfew Uhrijx Aahjw

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Rjdpfexpqy Djx Aahjw Good condition

Condition: good (used), Year of construction: 2004, functionality: fully functional, Bobst SPO 160 Vision, ref. 3002 Rodpfxjy Tpfve Aahjw Year 2004 Maximum sheet size: 1600x1100mm Maximum speed: 4500 sheets per hour QUBE system Stripping unit Batch delivery In good working order.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Rodpfxoy Nfhxs Aahew Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: used, Year of construction: 2004, overall weight: 2,580 kg, total length: 2,200 mm, total width: 1,650 mm, total height: 2,250 mm, AGIE AGIECUT PROGRESS 2Wire EDM machineWorkpiece height: approx. 250 mmWorkpiece weight: approx. 400–500 kgTable size: approx. 600 x 400 mmSupply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA.Wire EDM technology, automatic wire feed, hydraulic systems, robust construction.Control panel, emergency stop, sensor monitoring. Travel Z-axis: 256 - mm Travel X-axis: 350 - mm Weight approx.: 2,580 kg Control: CNC/SPS Dimensions (LxWxH) approx.: 2200 x 1650 x 2250 mm Rodjy S Ni Eepfx Aahew Travel Y-axis: 250 - mm Year of construction: 2,004 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. Rjdpfx Aajy Szlxehsw We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Internal lateral strip guides Rsdpfey Syivox Aahew 2 rotary punches, numerous adjustment options Strip outfeed basket Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation The machine was used to punch C-rails and hat sections from 2 mm sheet metal. It operated flawlessly in the customer's production facility until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other equipment.

Condition: used, Year of construction: 1981, machine/vehicle number: 800 02 81 46, type of input current: three-phase, Specialized EDM drill (eroding machine / hole starter EDM machine) This machine is primarily used in metalworking as a hole starting EDM machine or for spark eroding the removal of broken tools (such as taps, drills, or reamers) from valuable workpieces. This is done with extreme precision without damaging the surrounding thread or material. Redpfx Asy Su Iysahjw

Condition: new, Year of construction: 2026, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, total height: 2,280 mm, total length: 1,445 mm, total width: 19,975 mm, overall weight: 2,600 kg, Technical Data: Travel Paths: X: 600mm Y: 500mm Z: 755mm W: 500mm W-Type: Servo Motor Dimensions (W x D x H): 1975 x 1445 x 2280 mm (max. 2785 mm) Required Space (W x D x H): 2100 x 1600 x 2900 mm Usable Electrode Diameter: ø 0.1 ~ ø 3.0mm (up to ø 6.0mm optional) Usable Electrode Length: 800 mm Machine Weight: 2600 kg Max. Workpiece Weight: 1000 kg Power Supply: 3ø 380V 50~60Hz (adjustable) Redpoy R Npvofx Aahow Max. Permissible Current: 30A Rated Load Capacity: 5 KVA Required Pneumatic Pressure: 5 bar Ion Exchange System with Sensor

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Rjdpfsy R Dtcox Aahjw

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers Rsdpfx Aaoy Rumyjhjw - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: Rodpfx Aasy Rummohjw – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers Rodpfxjy Rumao Aahsw – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: Rsdpfx Aaoy Rulvjhew – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,435 mm, total width: 2,203 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 725 mm, workpiece length (max.): 600 mm, overall weight: 2,850 kg, warranty duration: 12 months, The Kmway EK-Series Wire EDM machine has been developed for users who value accuracy, efficiency, and long-term reliability. Thanks to its compact design, advanced wire threading technology, and robust, thermally balanced construction, it offers the perfect combination of precision and practical application. Why choose the EK-Series? – Next-generation Automatic Wire Threading (AWT): Highly reliable threading system that operates with or without flushing, increases machine uptime, and reduces operator intervention. – Linear Motor Drive: Friction- and backlash-free motion improves long-term cutting accuracy and reduces mechanical wear compared to conventional ball screw drives. – Extremely Rigid One-Piece Frame: Thermally balanced and designed for stability – ensures dimensional accuracy even during long or high-load machining cycles. – Small Footprint, High Performance: Compact design with integrated generator and filtration system, ideal for confined workshop spaces without compromising on performance. – Advanced Filtration System: The improved design allows for a 3 to 5 times longer filter life than conventional systems and enables quick and easy replacement when needed, minimizing downtime. Rodey Rk H Nopfx Aahsw – Operator-friendly Head Design The upper and lower heads are optimized for easy maintenance access, ensuring consistently high output quality with less effort. With decades of experience in the field of electrical discharge machining (EDM), Kmway provides energy-efficient, high-precision solutions that are appreciated worldwide. Technical Specifications: Axis Travel (X, Y, Z) mm: 400 x 300 x 220 Axis Travel (U, V) mm: 60 x 60 Maximum Workpiece Size (W, D, H) mm: 725 x 600 x 215 Maximum Workpiece Weight kg: 350 Axis Drive System: Linear Motor for X and Y axes U + V + Z: AC Servo Motors X-Y Axis Traverse Speed mm/min: 1800 Wire Diameter mm: Ø 0.15–0.3 (Standard 0.25) Maximum Taper Angle: ±14.5°/80 mm Machine Weight kg: 2850 Machine Dimensions (W x H x D) mm: 2203 x 2015 x 2435

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible. Rjdpfxoy N Uwij Aahsw

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number Rsdowc Tdzjpfx Aahsw System sold as a donor for spare parts Technical details: Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001

Year of construction: 2023, condition: as good as new (ex-display), PY-1200 is an ideal and professional machine in die-cutting，creasing，embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to paper cup,paper box,medical package,wine package,food package and other environmental protection products. Rodpfx Aaoxnkdgshow Cut Precision ~ 0.10mm Production Capacity 150-210 times/min Max cutting size 120x64 cm Maximum pressure 350 tons Total power 14.5 kw Total weight 8400 kg overall dimensions 4.2x2.3x1.85 m

Condition: used, Year of construction: 1979, Format: 920??1300 mm Equipment: Maximum sheet size 920??1300 mm, minimum size 560??1300 mm opening width within frame 920??1310 mm, maximum die size 910??1300 mm maximum die-cutting area 900??1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h Rodpfx Aaoy Iu Rtohew infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

Year of construction: 2024, condition: used, functionality: fully functional, Maximum paper feed size ( mm ): 1320*980mm Minimum paper feed size( mm ): 350x450mm Maximum die cutting size( mm ): 1300x960mm Minimum mouth size( mm ): 8mm Rjdjw Rwipopfx Aahow Maximum die cutting pressure( T ): 350N/cm² Machinable paper( mm ): 200-2000g/ m² / 10mm (max thickness) Die cutting accuracy( mm ): ±0.1mm Maximum speed(sheets/hour): 5500 sheets/h Maximum stack height of paper feed(mm): 1400mm (above the level) Minimum stack height for receiving paper(mm): 1250mm (above the level) Gross power(KW): 18.5kw Machine weight(T): 19 T Overall dimension: 7500x2200x2250mm

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Rsdpfx Aajyzw I Iohjw Special features: Linear measuring system on all axes (Z axis standard in series)

Year of construction: 2000, condition: used, Punching machine Premium quality HM 35/350 BKE 200/5 Redpfx Aog Dgyxjahsw Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²