Used Edm Die Sinking Machine for sale (98,981)

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Iodpfjw Syyyjx Afijih

Condition: not inspected (used), Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, table width: 515 mm, table length: 640 mm, Wire EDM machine Chmer EDM Type: CD 305G Iedeqgcimjpfx Afioih X-path: 400 mm Y-path: 300 mm X-path: 220 mm bed: 515 x 640 mm Year of construction: 2002 Hours: 16333 Including documentation and parameters Dimensions: 245x200x203 cm LxWxH

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Isdexpqy Dspfx Afioih Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: good (used), Year of construction: 2012, ETERNA PE 1620 SA - ELITE Year: 2012 Max. Size: 1620 x 1200 mm Max. Cutting Force: 400 t Max. Speed: 3500 sheets/h Iiedpfsxpnrwex Afioh Centerline QuickLock System Chaseloader

Condition: excellent (used), functionality: fully functional, We are offering a used System 3R-217-1 Marco Block here. The chuck is in very good condition and fully functional. Viewing by appointment possible. Shipping and viewing available! Iodpfx Asxphvcjfijih

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control Ijdoxpfy Sjpfx Afijih Hybrid construction Travel paths: X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Maximum workpiece dimensions: 810 x 700 x 215 mm Maximum workpiece weight: 500 kg ODS - Optical Drive System Tubular direct drives in XY axes Linear scales in XY axes Intelligent AT – Automatic wire threading For wire diameter 0.10 – 0.3 mm Automatic fine hole detection function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler 171025

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Table size 600 x 400 mm Max size of workpieces 900 x 600 x 330 mm Max weight of workpieces.750 kgs Iisdpfxexpfite Afish X travel 400 mm Y travel 300 mm Z travel 300 mm Power of generator 60A Dimensions LxWxH = 2190 x 1880 x 2360 mm Weight 2800 kgs Accessories - Magnet table - EROWA tool clamping system - Machine manual The machine is in great technical condition and will be sold because of company liquidation.

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Measurements height 2290 mm Machine weight 4400 kg Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Iiedpoxn Uyxefx Afish Workpiece Workpiece weight 800 kg This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Application Types EDM

Year of construction: 2001, condition: excellent (used), Make: Trump card Type: TRUMATIC 2000R Year of construction: 2001 Work area: 1270 x 1270 mm Ijdpfx Asdyn Riefijih Punching power: 18 to Maximum sheet thickness: 6,4 mm Maximum workpiece weight: 75 kg Maximum punching diameter: 76 mm Max speed: 90/60/108 m / min Accuracy: +/-0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, very good condition, just thin sheets

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 9710C365, workpiece weight (max.): 250 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, controller model: FANUC SERIES 16-W, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid obligates you to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Travel distances Travel X-axis: 320 mm Travel Y-axis: 220 mm Travel U-axis: 120 mm Travel V-axis: 120 mm Travel Z-axis: 180 mm Max. workpiece weight: 250 kg Feed rate in X and Y axes: 900 mm/min In U, V and Z axes: 450 mm/min Iiedpsxnl Umofx Afish Table dimensions: 530 x 330 mm MACHINE DETAILS Control: FANUC SERIES 16-W Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,400 mm Weight: 3,000 kg EQUIPMENT Coolant tank

Year of construction: 2020, condition: used, with sectional conveyor belt, SIEMENS Simatic HMI Touch control, operator panel with stairs and railing, min. sheet size: 400x350 mm, max. sheet size: 1060x760 mm, minimum material weight: paper 90 g/m², maximum material weight: solid board 2,000 g/m², maximum paper stack weights: main stack: feeder 1,000 kg, delivery 900 kg, auxiliary stack: feeder 380 kg, delivery 50 kg Iijdpjxnanbefx Afioh

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Iodpjumuxxsfx Afieih Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: excellent (used), Year of construction: 2018, operating hours: 21,250 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, table width: 840 mm, overall weight: 4,090 kg, table length: 640 mm, A Mitsubishi MV2400R is for sale. Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm Iiedpfxswlq Hlj Afieh U/V-axis: +/- 75 mm Design: 4-sided frame table, hardened with automatic vertical sliding door as a water bath machine Table size: 840 x 640 mm Workpiece size: max. 1050 x 820 x 305 mm Workpiece weight: max. 1500 kg Wire ¯: 0.1 to 0.3 mm for wire spool holder 10 kg Control: MITSUBISHI M800 with 19" full-touch monitor (including handheld pilot with configurable LCD monitor) Closed control loops Min. axis resolution 0.05 μm Generator: H-FS fine finishing generator Digital AE II Generator Equipment: Tubular drives with linear scales (X/Y/U/V) Handheld pilot with configurable LCD monitor 20 kg wire station Angle Master Advance II Set Consumable parts box Ergolux lamp Corehold function Job planner Filter pump pressure sensor Operating data output Free software update as needed Digital electricity meter / filter pressure sensor Ethernet/DNC/FTP Automation ready McAfee AntiVirus embedded McAnywhere Service 3D CamMagic on board Machine weight: 4,090 kg Installation dimensions: 2687 x 3030 x 2150 mm Option: HIRSCHMANN clamping system (not included in price)

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1300 mm Measurements depth 2450 mm Measurements height 1900 mm Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Application Types Iiedpfjxnr Erjx Afish Bending

Condition: used, fully functional die sinking machine Charmilles D20 Iiodpfxeccnxwj Afioh

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Work Table Table dimensions: 780 mm x 630 mm Table load capacity: 1,500 kg Taper: 10° / 150 mm U/V-axis travel max.: 30 mm Iijdpexnkblofx Afijh Maximum workpiece dimensions: 1,050 mm x 800 mm x 295 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 mm x 2,460 mm x 2,100 mm Weight: 3,500 kg

Year of construction: 2010, condition: used, with operator platform, 2 BUSCH conveyor belts, format: 74x106 cm Iedpfx Afjxnanhsisih

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Ijdpfx Aoxmu T Nsfioih Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: used, Year of construction: 1972, functionality: limited functionality, FRECH DAM 100, year of manufacture 1972. General overhaul by Brescia Presse in 2000. The hydraulic system was converted to an external two-stage hydraulic pump with tube cooler. Mold spraying system Wollin, cooling belt and holding furnace RAUCH MO 125 E by RAUCH. Further details and pictures on request. Iiodsxn Sp Dspfx Afioh

Year of construction: 2007, operating hours: 37,000 h, condition: ready for operation (used), General Data Iijdpfsxmbvqsx Afieh Measurements width 2810 mm Measurements depth 2600 mm Measurements height 2080 mm Machine weight 4450 kg Main Drive Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Workpiece Workpiece X 1200 mm Workpiece Y 400 mm Workpiece Z 700 mm Workpiece weight 1500 kg Injection Unit Injection pressure 2/4/8/13 bar This 3-axis CHARMILLES Robofil 440 CC was manufactured in 2007 and features a robust design with a total system weight of 4450 kg when filled with dielectric. It can handle workpieces up to 1500 kg, with maximum dimensions of 1200 x 700 x 400 mm. Ideal for precision wire EDM processes, this machine offers a comprehensive control system with a TFT 12" screen. If you are looking to get high-quality EDM capabilities consider the CHARMILLES Robofil 440 CC machine we have for sale. Contact us for more information. Application Types EDM

Condition: excellent (used), Year of construction: 2003, Machine with water tank and automatic wire threader, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Iijdpfeu Thd Hox Afioh Accessories: Dongel & laptop, various spare parts (nozzles, filters etc.)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,560 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine within the scheduled period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances: X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U-axis travel: +/- 32 mm V-axis travel: +/- 32 mm Max. workpiece dimensions: 800 x 600 x 215 mm Max. workpiece weight: 500 kg Worktable dimensions: 590 x 514 mm Rapid traverse rate of worktable: 1,300 mm/min Electrode wire diameter: 0.1–0.3 mm Max. wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Max. taper angle: 15° (at 100 mm workpiece height) MACHINE DETAILS Dimensions & Weight: Dimensions (L x W x H): 2,500 x 2,100 x 2,100 mm Weight: 2,000 kg Operating hours: Iedpsxni T Hefx Afijih Machining time: 11,560 h Control total on-time: 65,288 h

Condition: ready for operation (used), Year of construction: 2001, Immediately available from a small toolmaking workshop: Iedpfx Afoxn Rynoisih Mitsubishi Wire EDM Machine Type FA 20 – S Advance Year of manufacture: 2001 Table load / workpiece weight up to 1,500 kg Travel X/Y/Z: 500/350/300 mm Submerged (water bath) machine Automatic wire threading Complete accessories Price: EUR 4,000.— plus VAT ex location

Condition: like new (used), Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, total length: 2,600 mm, total width: 2,340 mm, GF Machining Solutions CUT P550 Pro Year of manufacture: 2022 Uniqua Control Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Integrated Collision Protection (ICP) on all 5 axes Cutting speed of 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.10 to 0.33 mm (with WIRE100 option) Ijdpfexl Suusx Afieih Including Taper Expert option for 0.25 mm wire Including AC-Setup 3D option Including wire chopper option Including horizontal manual annealing option Including automatic central lubrication option Including active thermal stabilization option Including SparkTrack option Including iWire option Including kit for 0.10 mm wire Overall system dimensions: 2,600 x 2,600 x 2,340 mm Total system weight: 3,300 kg The machine will be cleaned, serviced, and fully tested for all functions by us upon order placement. You will receive a 6-month warranty on the machine. We would be happy to offer you commissioning of the machine.

Condition: excellent (used), Year of construction: 2003, operating hours: 31,486 h, Medium format Operating hours: 31,486 h Price on request Iodjxl R I Topfx Afisih