Used Edm Die Sinking Machine for sale (67,407)

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Electrical Data: 400V; 21.5A Lsdpfx Apsyxfqrjmjaf Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: used, Year of construction: 2004, overall weight: 2,580 kg, total length: 2,200 mm, total width: 1,650 mm, total height: 2,250 mm, AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Lodpoy S Ni Eefx Apmjaf Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring. Travel Z-axis: 256 - mm Travel X-axis: 350 - mm Weight approx.: 2,580 kg Control: CNC/SPS Dimensions (LxWxH) approx.: 2200 x 1650 x 2250 mm Travel Y-axis: 250 - mm Year of construction: 2,004 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. Ljdpfx Apeztn Rnemeaf A very rare machine on the market.

Condition: new, Die cutting machine ML-2000 NXL The machine is brand new. It is the heaviest weightlifting machine in this format. Laedpfx Asztn Nwopmof Format: 2000 × 1400 mm Weight: 14000 kg 380 V power supply Engine: 15 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – pneumatic lifting system of the sheet on the pressure – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in Europe.

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Laodeztn Nqepfx Apmef Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells Lajdpfx Aeztn Nkopmof – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication Lodpfx Apjztn I Hemeaf – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: ready for operation (used), functionality: fully functional, SASPI GV3-20 Laodpfx Aexv Si Tspmef Threaded diameter M4-M12 Shaft length under head 150 mm Max threaded length 130 mm Production rate 85-220 parts/min weight 4400 kg motor power 14 KW Excellent condition ! "Your Next Reliable Production Machine Starts Here"

Condition: ready for operation (used), functionality: fully functional, SASPI GV4-30 Laedpfx Apew Uhriomjf Min / max threaded diameter M4 / M14 Min / max threaded length 10-150 mm Motor power (ca) 32 kW Production speeds (ca) 50-200 parts/min Excellent Condition ! "Your Next Reliable Production Machine Starts Here"

Year of construction: 2000, condition: used, - 5 printing units - 1 flexo coating unit - 6 UV drying units (air-cooled) - Rotary die-cutting unit - GAP Master - BST POWER SCOPE 3000 "Pro Mark Edition" - video system for print image monitoring The scope of delivery also includes a rotary die-cutting unit for the back side; this can be used in place of the flexo coating unit. Laedpfoy H U Uisx Apmsf Full rotary, 355.6 mm Maximum web width: 340 mm Minimum web width: 120 mm

Year of construction: 1992, condition: ready for operation (used), Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. Ledpfsp R R Idjx Apmsaf

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 500mm/3590mm/250mm, wire diameter range: 0.15mm-0.3mm, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight: 400kg/800kg, max. taper: 30°/100mm, wire speed: 300mm/s, max. surface quality: Ra 0.1µm. Machine dimensions X/Y/Z: approx. 2800mm/2400mm/2250mm, weight: approx. 4500kg, control: Agie, operating hours: approx. 151182h. Documentation available. An on-site inspection is possible. The image is an example. Lajdpszhnruofx Apmef

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Ledpfx Apsza E Rmjmoaf

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Lodpeuyk Rlofx Apmeaf

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible. Ljdoxwyv Repfx Apmsaf

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Lasdpfsuqackjx Apmof

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible. Lsdpfx Ajy N Uwispmeaf

Condition: ready for operation (used), One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: approx. 250stitches/min. Inspection possible by prior arrangement. Lodpfszk Nb Aex Apmjaf

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Ljdpfx Apew Sxx Ismsaf

Condition: ready for operation (used), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible. Laedpfx Apevb Hbrjmsf

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Lodpfx Asy R Dtcopmoaf

Year of construction: 2005, condition: ready for operation (used), A Sodick CNC wire EDM machine is available. Travel X/Y/Z: 750mm/500mm/400mm, travel U/V: 770mm/520mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, wire diameter range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Documentation available. An on-site inspection is possible. Ledezi Ei Hjpfx Apmsaf

Condition: ready for operation (used), Punching force: 3000kN, table surface: 2200x1600mm, clearance at maximum stroke position: 190mm, punching stroke, adjustable: 20-160mm, working height without punching pad: 1050mm, punching speed V (down): 63mm/s, V (up): 71mm/s, V (high pressure): 6,8mm/s, punching sliding table, usable area: 2200x1600mm, travel, constant: approx. 120mm, in/out travel time, adjustable: approx. 2s, voltage: 400V, phases: three-phase, frequency: 50Hz, rated current: 55A, upstream fuse: 80A, control voltage: 230/24V, rated power: 30kW, protection class: IP54, operating pressure: 6bar, weight: 18t, with hydraulic unit type 250, with documentation. An on-site inspection is possible. Laodpfszukrdex Apmsf

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone Lasdozt Nbzspfx Apmsf - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Lsdpfx Apsztyxdemjaf Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.