Used Drill Tap Center for sale (17,015)

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Nwsdpfjxy Tmnox Ahvjc

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Njdpfx Asxy Tlwohvowc

Condition: not inspected (used), functionality: unexamined, drilling depth: 100 mm, rotational speed (max.): 4,500 rpm, table width: 220 mm, table length: 280 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the purchaser to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Nsdpfx Ahjynimbsvowc TECHNICAL DETAILS Spindle speed: 220 – 4,500 rpm Drilling depth: 100 mm Table dimensions: 280 x 220 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 540 x 400 x 1,600 mm Machine weight: 300 kg External reference: Lot 1 / Training workshop

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 256824, input voltage: 230 V, rotational speed (max.): 3,450 rpm, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! Nwjdpfjynh I Dox Ahvjc TECHNICAL DETAILS Speed: 2,800/3,450 rpm MACHINE DETAILS Operating voltage: 230 V Rated current: 1.6 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 400 x 400 x 1,200 mm Weight: 70 kg EQUIPMENT With chuck for drills: 1.5–6.3 mm / 6.3–16 mm / 16–26 mm External reference: Lot 6/ Dommel

Condition: used, Technical details: bore capacity in steel (diameter): 23 mm Nodpfsynhmmox Ahvowc throat: 250 mm bore stroke: 150 mm speeds:: 180-2000 U/min spindle taper: MK2 total power requirement: 1,5-2,2 kW weight of the machine ca.: 500 kg

Condition: new, Year of construction: 2026, - Infinitely variable speed control - Quick-adjustable drilling depth stop - Thread cutting device - Undervoltage release - Table height adjustment via rack and pinion - LED head lighting - Continuous/standard drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Throat depth 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): 2 slots, spacing 125 mm - Digital speed display - Digital drilling depth display - Quick-adjustable drilling depth stop - Manual feed - Motor: 3-phase 400 V - Spindle speeds stepless 30 - 3,000 rpm Option Drill Package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-release drill chuck 3-16 mm (accuracy 0.17 mm) - Morse taper arbor MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 Option: Coolant system: €605.00 FACTORY WARRANTY: 3 years DELIVERY: Free to your door, including packaging Nedped Nk S Iofx Ahvowc NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! PLEASE ASK US FOR AN OFFER!

Condition: used, Year of construction: 2015, Twin-spindle machining center – 4 axes Nedpfsycqp Hsx Ahvewc Travels x/y/z = 400 x 500 x 425 mm 2 x swivel axes Tool magazine: 2 x 36 positions Tool holder: HSK 63 Spindle speed up to 17,500 rpm Siemens 840D Chip conveyor Coolant system

Condition: used, Year of construction: 2012, operating hours: 8,600 h, functionality: fully functional, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness copper (max.): 5 mm, For sale: Combined sheet metal and tube laser cutter BLM ADIGE-SYS LT COMBO. This machine is designed for both sheet, tube, and profile cutting in a single system – an ideal solution for versatile and flexible production. The machine is connected and fully operational; it can be inspected and observed working in real time. Single owner. Full service history available, the machine has been regularly maintained with annual servicing. Manufacturer: BLM Group Model: ADIGE-SYS LT COMBO Nwjdpsyaavdefx Ahvec Year of manufacture: 2012 Technology: Fiber laser Source: 3 kW LT Combo Tube and profile cutting diameter: 16 – 225 mm Tube input length: 6.1 m; output length: 6.1 m Cuts to zero – leaves no remnants Sheet table: 1500 x 3000 mm Cutting capacity: ALU 10 mm; Stainless Steel 12 mm; Brass 5 mm; Steel 20 mm Laser cutting hours: 8,600 h (as of 2026-02-27) Total machine hours: 72,000 h (as of 2026-02-27) Other: spare laser cutting head included If you have any further questions, we would be happy to assist you.

Condition: good (used), Year of construction: 2015, operating hours: 6,600 h, 1 used machining centre Manufacturer: Spinner Model: VC 750 Year of manufacture: 2015 Control: Heidenhain iTNC 530 Approx. 6,600 spindle hours Travel: X 760 mm Y 460 mm Z 460 mm Clamping table: 900 x 410 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool changer: 24 positions Nwodsyngc Tjpfx Ahvjc Workpiece weight: 350 kg Equipped with: Robot automation Heidenhain iTNC 530

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal. Nwsdpfjynfvfox Ahvsc Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 380V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). Nodpsynfu Uefx Ahvswc It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: good (used), Uchida GA-4W Four-Head Paper Drill This machine is in very good condition and ready for operation. Made in Japan. The machine has a number of features that make it easy to use, including: – four drilling heads with independently adjustable positions – a sliding programming bar – spacers for easy setup for drilling holes Technical specifications: Drill diameter: 2-10 mm, Stack height: 50 mm, Head spacing: 65 mm – 330 mm Weight: 370 kg Nedpfx Aeynfu Iohvswc 380V power supply Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. Waste discharge is directed outwards. Front and side margins. Includes operating tools. New cutting stick, drill bits, and sharpener.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Machining Center – Horizontal (pallet design) Brand: KOLB | Year of manufacture: 1996 Total operating hours: approx. 100.000 h Nodpeynb Svsfx Ahvjwc Condition: Fully functional (moderate repair work required before installation) The machine can be inspected by appointment. TECHNICAL DATA: - Position of main spindle: Horizontal - Design: Pallet - Clamping surface: 2.000 x 2.500 mm - Speed: 6.3 - 2.500 rpm - CNC control: SINUMERIK 840D sl - Table/pallet travel: 4.000 mm * Workpiece weight: max. 35 tons - Rotary table: * Table rotation via NC axis: 360° (degrees) * Additional indexing: 4 x 90° (degrees) * Working area: 4.000 mm * Workpiece weight: max. 35 tons Column/portal: * Column adjustment: 1.750 mm Drilling and milling slide: * Y-axis (milling slide travel): 3.000 mm * Z-axis (milling slide stroke): 1.000 mm, RAM: 1.250 mm - Rapid traverse V-axis (transverse movement of the carriage): 120.000 mm/min - Chip conveyor Detailed technical data sheet and information on equipment available on request. No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Nwjdpfjyncfwjx Ahvjc Through-spindle coolant 20 bar

Condition: good (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting Nwedpfxsynb T Hs Ahvsc

Condition: excellent (used), Year of construction: 2007, operating hours: 36,900 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 28,000 rpm, 5-axis machining center Manufacturer: Hermle Model: C30U Year of manufacture: 2007 Control: Heidenhain iTNC-530 Power-on hours: approx. 36,900 h Operating hours: approx. 10,760 h S/N: XXXXX Nwsdpfxsynb S Ne Ahvsc Technical parameters: ----- • Travel X-Y-Z: 650 x 600 x 500 mm • C-axis: 360° • A-axis: +/-115° • Tilting rotary table Ø280 mm • 6x rotary union • Spindle: 28,000 rpm • Tool magazine: 32x HSK-A63 • Standard coolant system • 3D probe Renishaw • Option: Air blast through spindle • Option: Glass scales with purge air • Option: Electronic thermal compensation • Chip tray • Weight: 9,500 kg Accessories: ----- • Documentation • Rinsing gun • Handwheel • Holder package: 20x HSK-A63 tool holders

Condition: excellent (used), Year of construction: 2011, operating hours: 25,870 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 18,000 rpm, 5-Axis Machining Centre Manufacturer: DMG Model: DMU-60 Evo Control: Heidenhain iTNC-530 Year of manufacture: 2011 Operating hours: 25,870 h Spindle hours: 7,250 h S/N: 154XXXXX Technical Data: ----- • Travels X-Y-Z: 600 / 500 / 500 mm • Rotary table: 600 x 500 mm • Spindle: 20 - 18,000 rpm (130 Nm) • Tool magazine: 30x HSK-A63 • Option: 3D probe TS-641 • Option: Laser bridge for tool measurement • Option: Chip conveyor • Weight: 10,000 kg Accessories: ----- • Manuals • Rinsing gun Nwodpfx Ahoynb Spsvjc • HSK-A63 holder package (20 pcs.) • 3D Quickset

Condition: excellent (used), Year of construction: 1998, operating hours: 54,400 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: 426, spindle speed (max.): 30,000 rpm, 5-axis machining center Manufacturer: DMG Model: DMU-50V Year of manufacture: 1998 Control: Heidenhain TNC-426 Power-on hours: approx. 54,400 h Spindle hours: approx. 12,900 h S/N: XXXXX Technical data: ----- - Travel X-Y-Z: 500 x 380 x 400 mm - NC rotary/swivel table 360° / 500 x 380 mm - Spindle: 30,000 rpm - Tool holder: HSK-50 - Tool magazine: 24 stations - Coolant system - Chip conveyor: no - Automatic tool measurement - Connected load: 26 kVA - Weight: approx. 4.0 t Accessories: ----- - Manuals Njdoynb Iqspfx Ahvswc - Electronic handwheel - 20x HSK-50 tool holders

Condition: used, Year of construction: 1999, functionality: fully functional, We offer for sale a proven edge banding machine OPTIMAT BP 100 from 1999, which represents a reliable solution for small to medium-sized operations. This model has been thoroughly tested in practice and is ideal for companies seeking functional technology at a reasonable investment. Nedpfoynb Htjx Ahvswc

Condition: ready for operation (used), Year of construction: 2003, bore capacity in steel (diameter) 40.0 mm threading M 24 in St 60 throat 293 mm bore stroke 140 mm morse taper 3 Kurzspindel MK table: 514 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm throat 293 mm distance spindle /table min 117 / max 701 mm T-slots 2 x 14 x 224 feed 0.1 + 0.2 mm/U total power requirement 1.45 / 1.90 kW weight 370 kg dimensions of the machine ca. 1200 x 800 x 1840 mm current new price ~ 12.500 euros special price on request Equipment: - robust column drill - V-belt - - infinitely variable speed adjustment - analog speed system - automatic spindle feed - thread cutting device - pole-changing drive motor Nsdpfx Aoynbfpshvjwc - height-adjustable work table - machined base plate - feed overload protection - Main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection - Operating instructions in German * Special equipment included : - Thread cutting device * with foot switch, for thread cutting with stop - Machine light - Coolant device in the machine base

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. preferably in combination with HSS tool) -Interface set Contents: Nwodpfxexp Rywe Ahvec - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: used, Year of construction: 2009, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min Nodpfx Ajwvl Acjhvjwc power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - oil dust collector - prepared for cableless 3D touch probe Renishaw

Condition: not inspected (used), functionality: unexamined, overall weight: 250 kg, spindle speed (max.): 3,200 rpm, table length: 230 mm, table width: 230 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Speed: 1,450 rpm Spindle speed: 500–3,200 rpm Table dimensions: 230 x 230 mm Nedjym T Tispfx Ahvswc MACHINE DETAILS Operating voltage: 220/380 V Rated current: 4.7/2.7 A Connected load: 1.1 kW Dimensions & weight Dimensions (L x W x H): 700 x 650 x 1,900 mm Weight: 250 kg External reference: Lot 20 /Koch

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Nodpfxsym T I To Ahvewc Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axes Travel measuring system with correction Nwodewglfxepfx Ahvjc Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined!