CNC Turning- and Milling Center

DMG MORI NLX 2500 SY / 700

Condition: good (used), Year of construction: 2017, operating hours: 8,800 h, functionality: fully functional, machine/vehicle number: NL2561708843, number of spindles: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities: Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length max. (mm): 705 Turning diameter max. (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool Magazine: Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5 / 4.9 / 4.2 (3 min / 5 min / continuous) Rapid traverse (m/min): 30 Main Spindle: Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5 / 18.5 / 15 (25% duty cycle / 50% duty cycle / continuous) Max. torque (Nm): 49 Sub-Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11 / 7.5 (25% duty cycle / continuous) Gedpfx Agjyzxcgjfsua Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System: Tank capacity (liters): 366 Equipment: Chip conveyor Signal tower Machine operating hours: Power on hours: 19,393 Cutting time: 8,800 Rated power requirement (kVA): 48 Basic machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 The depicted tools, driven tools, and both chucks are not included in the scope of delivery.

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control SIN840D spindle turning speed - stepless 5 - 10.000 U/min power capacity at 40 % load 38,00 KW power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 kW spindle taper HSK 100 feed X/Y/Z/-axis 0 - 60.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed capacity X/Y/Z 12,00 kN B - axis 180 x 0,001 ° rapid travel B-axis 10,00 U/min size of pallet 800 x 630 mm table load 0,80 t C-axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 800 U/min power capacity - table 13,85 kW max. torque on the faceplate 1.550 Nm toolpiece magazine: chain magazine 60 Stück tool diameter 110 mm wotkpiece diameter with 2 vacant positions 230 mm tool length - max. 450 mm weight of tools max. 30,00 kg total power requirement 80,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 7,50 x 5,50 x H3,50 m 5-axis machining center with SIEMENS SIN840D Gujdpfxex Tiy Te Agfoa coolant filer system 980l, chip conveyor, coolant through the spindle, extraction, BLUM tool measurement, measuring probe, operating mode 4, tool cone cleaning, hydraulic clamping with proportional valve.

Condition: used, Year of construction: 2017, Technical details: turning diameter: 356 mm Gsdpeyxpv Sjfx Agfoua turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 ( ±50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 15/18,5/18,5 kW Spindle 1 Torque: 409/505 /599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 7,5/11 kW turret stations / rotary tool stations: 20 / 20 BMT40 speed of driven tools: 10000 1/min : 3.7/5,5/5,5 kW torque rotary tools: 14 / 24 Nm total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Sp. 1 und Sp. 2 Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Interface for coolant through the spindle Coolant through spindle 70 bar Knoll Program restart Tool presetter Spindle 1 & 2 Coolant shower 1m Barfeeder magazine IRCO High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning length: 705 mm, turning diameter: 366 mm, spindle motor power: 18 W, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe Paper band filter Working time hours Under power: 23.501 Cutting Time: 7.494 Potencial nominal kVA: 48 Basic machine dimensions / weight Godpjywtwwofx Agfsua Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: excellent (used), Year of construction: 2004, Maier ML 26 E CNC lathe TECHNICAL DATA Number of axes: 11 Spindle bore: 32 mm Path speed: 32 m/min Control: Maier Pro GE-Fanuc Guide bush: 451.001 Main spindle Clearance: 26 mm C-axis: Yes Gusdpfxeu S Rivo Agfja Mechanical indexing 5°: Yes Headstock stroke: 220 m Main spindle, speed: 0 - 6000 rpm Power: 3.7 kW / 5.5 kW (7.5 kW) Collet chuck: 161E Counter spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Max. travel (Z): 220 mm Counter spindle, speed: 0 - 6000 rpm Main spindle, power: 1.1 kW Collet chuck: 161E Cross machining Basic holder for turning rings 5 pcs. 16 x 16: Yes Number of driven tools: 4 Power of the driven tools: 0.5 kW Back machining Drive power: 0.5 kW Number of tools: 4 of which driven tools: 4 Collets: ER16 Tool turret Number of tools: 16 Number of driven tools: 8 Drive power: 0.5 kW C-axis: 360 ° Z-axis: 175 mm X-axis: 200 mm Collets: ER16 SCOPE OF OFFER U.A: (list not exhaustive): Maier ML 26 E CNC lathe Oil mist separator transformer Chip conveyor High pressure pump / belt filter system Fire extinguishing system LNS bar feeder Complete operating documentation Exact scope of offer according to photo gallery No responsibility is taken for the accuracy, completeness and timeliness of the information

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning diameter over cross slide: 740 mm, turning diameter: 920 mm, spindle motor power: 18 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, milling spindle length: 91 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, swing diameter over cross slide: 740 mm, spindle nose: JIS A2-8, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Mist collector Workarea light Chuck foot switch (double) for main and counter spindle Coolant gun Measuring probe Paper band filter Preparación para trabajar con robot Robot data - Fanuc - R-30iA / Type M-16iB/20 Guodpfxjwkf H Dj Agfoa Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220mm x Hight 20mm Max. Weight by robot piece: 5,6kg Working time hours Under power: 23.501 Potencial nominal kVA: 48 Cutting Time: 7.494 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: used, Year of construction: 2017, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm Guodpfx Agexzk Ifjfsa C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis - only 1.237h Spindle hours

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, number of axes: 5, This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. • Control system: NCT-104 Gujdex Imtaopfx Agfea • Table: rotary, 1800 × 1800 mm • W (spindle quill): 570 mm • Spindle diameter: 130 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] Gedpex H Atyofx Agfsua - Max. bar diameter : 90 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/-50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41 [kW] MACHINE HOURS - Number of hours under power : 21392.8 [h] - Number of working hours : 13797 [h] EQUIPMENT - CNC : CELOS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS V - 3 colors status lamp - Coolant tank : KNOLL * with high-pressure pump : 70 [bars] * with paper filtering unit - Tailstock option with counterspindle - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICKLOAD - Electric transformer - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Collet chuck

Condition: used, Year of construction: 2014, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 spindle bearing diameter 140 mm spindle bore 91 mm max. usable bar diameter 80 mm chucking diameter 250 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW Gusdpsu Hq Rlefx Agfoa spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm max. usable bar diameter ( - ) mm chucking diameter 170 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. tool taper BMT 60 Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 Gujdpsw U Ry Nofx Agfea TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.