Portal - Machining Center

DROOP + REIN FOGS 40 60 C

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t Podpfjwzmpzjx Af Ssgt dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Pgedpfoy En Dnox Af Sjt Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Pedjt Hwt Sspfx Af Sogt Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: excellent (used), SK 50 holders (28627) Pgjdpfx Aowl U Tcof Sst Various manufacturers: Bilz Kelch Sandvik Clarkson Approx. 90 pieces

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles Pjdpfsvppw Sox Af Sogt -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: used, Manufacturer: HERMLE Model: C 40 U dynamic Machine type: 5-axis universal CNC machining center Year of construction: 2006 Machine No.: 1XXXX Control system: SIEMENS SINUMERIK 840 D Condition: extremely good / exceptionally well-maintained CE marking: available Original HERMLE documentation: available Travel ranges X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm Dynamic feed drive Rapid traverse X/Y/Z: 60 m/min Acceleration: 10 m/s² Feed force: 8,500 N Dynamic feed spindles X-axis: Ø 40 / 20 mm Y-axis: Ø 50 / 40 mm Z-axis: Ø 40 / 30 mm Main spindle Spindle speed: 18,000 rpm Tool interface: HSK A63 Internal coolant supply: 80 bar Compressed air through the spindle center Tool magazine Tool positions: 38 Tool interface: HSK A63 Automatic tool changer NC swivel rotary table Table type: SRT 800 Table diameter: Ø 800 mm Maximum table load: 1,400 kg A-axis total range: 135° A-axis: minus 110° to plus 25° C-axis: 360° 6-fold rotary through-feed Parallel T-slots: 14 H7 Measuring system / Accuracy Direct linear measuring system X/Y/Z Resolution: 0.1 µm Input unit: 0.1 µm Display increment: 0.1 µm Position tolerance Tp X/Y/Z according to VDI/DGQ 3441: 0.008 mm RENISHAW measuring probe 3D tool radius compensation In-process measurement Electronic thermal compensation SIEMENS Coolant and chip disposal system Internal coolant supply: 80 bar KNOLL high-pressure coolant system KNOLL filter system Scraper conveyor Chip flushing gun Chip cart: 200 liters Compressed air through the spindle center Oil mist extraction KNOLL KF 200/1000 Manufacturer: KNOLL Maschinenbau Type: KF 200/1000 Year of construction: 2006 KNOLL 850 K 1 Year of construction: 2006 Equipment NC swivel rotary table Ø 800 mm RENISHAW measuring probe Direct linear measuring systems X/Y/Z 3D tool radius compensation In-process measurement Electronic thermal compensation SIEMENS 6-fold rotary through-feed Internal coolant supply 80 bar KNOLL coolant and filter system Psdpfx Afjz E Axhs Sogt Scraper conveyor for chips Chip cart 200 liters Compressed air through the spindle center Chip flushing gun Oil mist extraction Manual cabinet door Manual cabinet roof Laminated safety glass panes Machine lighting German documentation Original HERMLE machine documents CE declaration of conformity NAS acceptance test in customer's plant Electrical data Operating voltage: 400 V / 3 phases Mains frequency: 50 Hz Control voltage: 24 V DC Total rated current: 63 A Total connected power: 43 kVA Connection cable cross-section: 16 mm² Minimum short-circuit strength of the power grid: 2.50 MVA IKZ electrical data Connection: 400 V / 3 PH / 50 Hz Control voltage: 24 V DC Fusing: 50 A Cable cross-section: 10 mm² Connected load: max. 16.6 kVA Dimensions / Weight Net weight according to nameplate: 10,500 kg Transport weight standard machine: approx. 10,300 kg Transport length: approx. 3,154 mm Transport width: approx. 2,354 mm Transport height standard: approx. 2,892 mm Transport height with Z motor removed: approx. 2,743 mm Transport height with Z motor and energy chain removed: approx. 2,640 mm Control cabinet cooling Manufacturer: RITTAL Type: Blue e+ SK 3185830 Year of construction / Production date: 2025 Cooling capacity: 1.60 kW Power consumption: 0.70 kW Temperature range: minus 20 to plus 60 °C Protection class internal circuit: IP55 Condition The machine is in extremely good and exceptionally well-maintained condition. Extensive original documentation and machine configuration available.

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min Pgsdpfew Rrb Hjx Af Sot - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Condition: ready for operation (used), Slideway grinding machine SFBZ 1800x4000 Length of grinding max, mm 4000 Width of grinding max, mm 1800 Dstance between column mm 2200 Psdouug A Eepfx Af Sjgt Height of grinding max, mm 1250 Table size, mm 4000 x 1800 Grinder wheel size max, mm 630 x 100 x 305 Weight of workpiece max, kg 15000 Weight of machine, kg 56.000

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Pgjdpeyr Dmdsfx Af Sjt Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Pedjthuzpspfx Af Sogt Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition