Center Lathe

VDF BOEHRINGER D 480

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm Hnjdpfx Ajt R T Hcehvsi 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tank (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tank (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2 x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1 x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4 x pressurised tank (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with switch cabinet Interested in only part of the system? The system is offered as a consignment sale. A partial sale might be possible – feel free to contact us and submit your offer. Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Cast wort capacity: 20 hl Hnedpfxowgc Udo Ahvoi Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system - Cross sanding unit Hodpfeidi Ivox Ahvoni - Longitudinal sanding unit - Shoe - Brush unit - Ionization

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm Hnsdstzf N Rjpfx Ahvsi -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: used, Pallet with T-slots suitable for DMG DMC 100 H and DMG DMC 100 U. Several pallets still available. Hnjdpfoqx Uh Nex Ahvei

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev Hnodpfxsirax Us Ahvei -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: used, Year of construction: 2002, turning diameter 820 mm turning length 2.000 mm control SIN 810 D center height over square guideway 400 mm turning diameter over slide rest 500 mm x-travel 540 mm z-travel 2.100 mm feed x/z-axis 0,01 - 50 mm/min rapid traverse X-axis 5,00 m/min rapid traverse Z-axis 10,00 m/min feeding force facing 12.500 N power feed longitudinal 20.000 N spindle turning speed range 6,4 - 1.600 U/min spindle turning speed - gearbox stage 1 6,40 - 376 1/min. spindle turning speed - gearbox stage 2 27,40 - 1.600 1/min. power capacity at 60% / 100 % load 46,00 / 37,00 KW max. torque at 60% / 100% load 5.073 / 4.069 Nm constant cutting rate 1 - 9.999 m/min. spindle head DIN 55027 - Size 11 spindle diameter in front bearing 170 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 125 mm quill stroke 280 mm thread pitch 0,1 - 400 mm total power requirement 35,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 6,00 x 3,00 x H2,60 m Hnjdew Dvipspfx Ahvji SIEMENS Sinumerik 810D mcontrol, chip-conveyor, tail stock, dust exhauster, 2 pc. steady rest. Machine can be inspected under power.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Hnedpfxeu St S Ae Ahvji Weight: approx. 850 kg

Condition: used, Year of construction: 2021, total length: 3,020 mm, - Vollkabine mit dem Heizung und komfortablen Dreipunktsicherheitsgurten - Überschlagschutz - Extrem stabiler, hochdruckgeformter Stahlrahmen - bis zu 454 kg Zuladungskapazität, - Anhängelast: 590 kg, - Vierradantrieb und eine teilunabhängige Radaufhängung, - „Active Hill Descent“ zur sicheren, intuitiveren Bedienung, - Frontantrieb oder die Differenzialsperre einzuschltbar duch elektronische Schalter am Armaturenbrett, - Digitale Armaturenbrett mit Gang- und eine Drehzahlanzeige, Geschwindigkeit und Kraftstoffstand, - Hinterradaufhängung: Stoßdämpfer, - Die hydraulischen Bremsen - Weiche Gangschaltung, die Parkstellung ist jetzt Teil des Getriebes Hodpfoxpi Sfsx Ahvsni - Motor: Yanmar 3TNV70 3 Zylinder mit dem Emissionsvorschriften gemäß der aktuellsten Abgasstufe V. - Rasenschonende niederdruckreifen - Elektrohydraulische Kippvorrichtung für die Ladepritsche. - Eine aufstellbare Heck-und Windschutzscheibe

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 motorized grinding spindles (liquid-cooled, purge air / oil mist lubrication) including REFU HF frequency converter, e.g. for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 Hsdpfx Ahsl Tn Afovsni 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as is – manufacturing year approx. 1992 A collection of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request All technical data subject to error or omission. We sell exclusively to countries within the European Community.