Used Resistance Soldering for sale (1,969)

Condition: used, Year of construction: 2016, functionality: fully functional, Complete medium-frequency resistance welding system, manufactured 2016, consisting of the B 5000 inverter control cabinet (S/N 29636) paired with the Bihler ET 70 welding transformer (70 kVA, S/N 82641). Both units are year-matched and original to each other. MF 5000 digital welding controller with 14" color display, closed-loop current/power/energy regulation, tool management, production data logging (PDE/MDA), and NC axis interface. Frequency adjustable 1,000–5,000 Hz. Original operating manual included. Manufacturer: Otto Bihler Maschinenfabrik GmbH & Co. KG, Type: B 5000 Lsdjzgw I Aopfx Aiiern Serial No.: 82641 Year: 2016 Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 VDC Total connected load: 50 kVA (standard); max. fuse 125 A Inverter frequency: adjustable 1,000–5,000 Hz in steps Short-circuit switching capacity: 6 kA CE marked Welding Transformer — Nameplate Data Type: ET 70.0.G-10000/4 Rated power at 50% duty cycle: 70 kVA Secondary voltage (U₂₀): 4 V, up to 3 V (U₂ₙ), stepped (4 tap positions) Input voltage: 500 V / 1000 Hz Secondary current at 50% ED (Iₙ): 10 kA (rated), cos φ: 0.9 Short-circuit voltage (Uₖ): 5% Short-circuit current (Iₖ): 10 kA Cooling flow: 6 l/min Insulation class: F

Condition: excellent (used), Here we offer you a Defensor steam humidifier. Defensor Mk5 resistance steam humidifier Steam humidifier Defensor Mk5 The Defensor Mk5 steam humidifiers are manufactured according to the current state of the art and the recognized safety regulations. Nevertheless, improper use of the Defensor Mk5 steam humidifier can pose risks to the user and/or third parties and/or cause damage to property. To ensure safe, proper, and economical operation of the Defensor Mk5 steam humidifier, observe and follow all instructions and safety precautions in this installation and operating manual. Defensor Mk5 Visual series For indirect or direct room air humidification with normal requirements for control accuracy. Defensor Mk5 Visual double unit large 80 Max. steam output in kg/h 80.0 400V/3~/50...60Hz Mk5 ... 80 Unit A: 40 kg/h Unit B: 40 kg/h Lrjdpezd Uk Njfx Aiien Type: Defensor Mk5 ... 80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) Lsdpfxjzd Rmgj Aiisrn (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Ljdpfx Aiozghf Eeijrn

Year of construction: 2014, condition: ready for operation (used), Working condition unit! Comes with infeed and outfeed conveyor systems and full of alloy. Machine still under operation and to be released in Q3 2026. Ask for additional details! Lsdpfx Aszcardeiisrn

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards Ledou Rwauepfx Aiijrn - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. Lrodpfxeu Rnd Dj Aiijn - Documentation available - Machine is CE98 certified On sale as is. *

Condition: used, Year of construction: 2023, functionality: fully functional, ERSA VERSAFLOW 4/55 2Mdolue S021B-23A0548D, used, 2023, price: €190,000 (conveyor not included) Ljdsx Tgvlspfx Aiisrn Specifications available on request.

Condition: used, Spot welding machine DALEX, Type SF 204 Machine No. AZA/N-32865, Year of manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Outreach: 500 mm Arm distance: 350 - 500 mm Electrode force: 65 - 360 kp (short outreach) Lodsit Rq Hepfx Aiisrn Electrode force: 25 - 140 kp (long outreach) Electrode arm: Ø 45 mm Electrode holder: Ø 25 mm Electrode stroke: 20 mm Welding performance: Steel sheet: 5 + 5 mm / max. 6 + 6 mm Brass sheet: 2 + 2 mm / max. 3 + 3 mm Aluminum sheet: 1 + 1 mm / max. 1.2 + 1.2 mm CrNi: 1 + 1 mm Round steel: 12 + 12 mm / 16 + 16 mm Open-circuit voltage: 5.2 volts Connected power: 55.2 kVA Mains connection: 400 volts, 50 Hz - Multifunction welding control with microprocessor Dalex RS 15 - Lower electrode arm with swivel fitting for height adjustment and lateral pivoting - Foot pedal operation - Water-cooled (requires a cooling water flow rate of 4 liters/min) Space requirement L x W x H: 1250 x 415 x 1200 mm (height = 1310 mm with base frame) Weight: 196 kg Very good condition

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter Lrjdpehpf Iysfx Aiijn - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition Lrodpfxoycv Saj Aiien

Condition: new, High-temperature resistant corrosion protection and temperature-resistant special electrode Lrjdpfx Aishhykioisn Manufacturer: Capilla Type: 521 E HL Diameter: 2.5 mm Length: 350 mm Weight: 5 kg

Year of construction: 2015, condition: used, Comes with transport conveyor system + Rohs solder (350kg). Lredoy Uwdiepfx Aiion Ask for additional information!

Year of construction: 2022, condition: used, Frame is from 2012 and machine fully rebuilt in 2022 by ERSA OEM. Lodpfxjy Uihts Aiisrn 1x fluxing module 1 drop jet flux head 180µm 3x preheating modules bottom IR lamps and top side convection 2x solder modules multi wave (dip modules) one standard size and one XL with electromagnetic solder pump No traceability system installed New conveyors retrofitted with heavy load chain system Ask for the full overview of the rebuild and its condition!

Condition: used, Year of manufacture: 2001 Lrsdpfohc T Irjx Aiijn In very good condition Additional images available

Condition: ready for operation (used), 6355 Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH, Used machine Manufacturer : Meritus Type : RAS 150 VSH Overall dimensions : 1000 x 1620 x 2100 mm Ledsu Nvh Uopfx Aiiern Weight : 840 kg Electrical data : 415 V ; 150 kVA ; 50 Hz - equipped with a photocell - tool water cooled

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Lrsderdf Acepfx Aiisn Electrical data: 415 V; 150 kVA; 50 Hz Equipped with light gate Tool water cooling

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 Lodpfjy N Dukox Aiiern - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Year of construction: 2024, condition: used, Make: AJAX TOCCO, Model: 23-13295, Year of manufacture: 2024, Serial no.: 23-13295, Connected load: 48 kVA, Converter output: 38 kW, Output frequency: 10,000 - 40,000 Hz, PLC system control with operator panel touch, 4 soldering stations, Cooling unit by Hyfra, type Sigma 18-S-RF-P, 2 extraction hoods, control/electrical cabinets, safety devices, 2 load carrier trolleys made from aluminum profile system, inspection table, mobile, 2,500 x 700 mm, 3 tiers, perforated metal wall, skylight, magnifier lamp, label printer by CAB, type EOS1, barcode scanner MDE by Zebra, type Omnii XT15 Lredpfsyx Etyjx Aiion

Condition: used, Year of construction: 2009, Offered here is a soldering robot from ATN Berlin. This is the "Vario" model. Component feeding is realized via exchangeable cassettes. The soldering process uses induction, making it a contactless soldering method. Lrodpfx Aijy Slkfoion

Year of construction: 2009, condition: used, For sale is our welding system from AEF Hauzenberg. This is an electrode welding system. Inside the unit, there are three zones where welding processes can be carried out simultaneously. The system is equipped with a control cabinet featuring a PLC, allowing the process parameters of the welding operation to be set. We used Silfos (AG) brazing alloy. Included in the delivery is also a water chiller from Habor, model HWK-1000PTSB2. Lredpfjy Skq Rox Aiijn

Year of construction: 2017, condition: excellent (used), Storage location: 2727 Lrjdpfx Aiolt Uinoisn Manufacturer: ESTA Year of manufacture: 2017 Type: KAF 100 Serial number: 16002366 Volume flow: 700 m³/h Max. negative pressure: 1,100 Pa Connection diameter: 50 mm Features: mobile Accessories: see image, including laboratory extraction arm Connection: 0.55 kW, 230 V Weight: 42 kg Dimensions: 485 x 485 x 920 mm (without hose)

Condition: good (used), Tires, solid rubber tires, forklift tires Ljdpfxoyx Dxbo Aiisrn -Manufacturer: Continental, solid rubber tire CSE-Robust SC 15 abrasion-resistant -Tire size: 5.00-8/3.00 111 A5 SC 15 RIM 3.00D-8 -Quantity: 1 piece available -Dimensions: Ø 460 x 130 mm -Weight: 17 kg

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 abrasion-resistant Lodpfsyxnpdex Aiiorn -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 12 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Lifting and lowering station Spray fluxer Lrodpfx Ajv Ta Hljiien Dynamic preheating at the bottom Convection heating