Used Dowel Insertion for sale (2,201)

Condition: like new (used), Shank: 8 mm diameter: Mainly 5.8 & 4.5 mm Quantity: 30 pieces Rbodpfx Ahovbhaijzet material: HSS

Condition: used, Working width: 720 mm working width: 820 mm Max. passage: 45 mm Max throughput: 120 mm Drilling depth vertical: 45 mm, horizontal: 120 mm Rodpfx Ahjlfcn Ejzsbt

Condition: excellent (used), Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Electronic Programmer RT 486 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) No. 6 Left-side + No. 6 Right-side Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Rsdpfjdi R R Rox Ahzebt Bottom vertical units/supports (N°) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Total installed power (Kw) 11,5

Condition: excellent (used), CNC FULL Flexible LINE for Drilling and Inserting, for the Front doors (of furniture) process With BECKHOFF Numerical Control (BLUESYS programming software + MDE). Composed by: A) WORKPIECES LOADING SYSTEM B) FLEXIBLE DRILLING-INSERTING MACHINE Mod. BAT-RTW-CNC Rjdpodz Ulcjfx Ahzebt With 4 working stations: - Station No. 1: Workpieces (panels) in-feed and positioning - Station No. 2: Drilling and routering - Station No. 3: Inserting - Station No. 4: Workpieces (panels) release and out-feed C) WORKPIECES UNLOADING SYSTEM

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 Rsdpegwbbqofx Ahzjbt N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Rsdpfsgvdkgsx Ahzobt Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Loader (Bridge Frame) "RBO" Double Station, Mod. Advantage C B) Motorized Roller table "RBO" with turning device 90° (length to crosswise) C) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 Centre A: No. 2 Electro-spindles ISO 30 (Kw 3,7 each) with tool-holder magazine with 3 places each. Centre B: No. 2 predispositions for the installation of other 2 electro-spindles No. 2 tool-holder magazines (revolver) with 56 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Connection transfer, with upsidedown turning machine (180°) "RBO" Mod. Ribaltatore E) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units(1 left+1 right)with 4 BH18 heads with 18 spindles(36 right + 36 left),total 72 Centre A: No. 2 Electro-spindles ISO 30 (Kw 4,5 each) with 3 tool-holder magazine each. Centre B: No. 2 predispositions to install another 2 electro-spindles No. 2 tool-holder magazines (chain) with 60 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit No.2 horizontal units(1 right+1 left)with 5 insertion nozzles each (5 left + 5 right), tot. 10 nozzles G) Stacker (Bridge Frame) "RBO" Double Station, Mod. Advantage SC

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: O03009A) THROUGH-FEED MULTI-BORER “BIESSE” Techno Logic with CNC No. 2 through-feed motorised belts, feeding speed up to 75 m/min No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), No. 5 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) No. 5 top pressing devices Rbedpfx Aew Uhbkehzet No. 2 endless screws to evacuate the wastes. Numerical Control Type CNI O03009B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno INFOR a C.N. No. 2 through-feed motorised belts, feeding speed up to 75 m/min No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) No. 2 Top pressing devices No. 2 endless screws to evacuate the wastes.

Condition: excellent (used), CNC FULL Flexible LINE for Drilling and Dowels Inserting (Fitting insertion). Rbedpfem Uyngex Ahzjt With BECKHOFF Numerical Control Composed by the following machines: A) HEDGEHOG Loader with in-feed transverse roller conveyor B) 1st FLEXIBLE CNC Mod. BAT-DTW, through-feed system C) 2nd FLEXIBLE CNC Mod. BAT-DTW, through-feed system D) 3rd FLEXIBLE CNC Mod. BAT-DTW, through-feed system E) 4th FLEXIBLE CNC Mod. BMA-DLS for drilling, montage, glue application and insertion F) Connection TRANSFER G) In-feed and rotating system RWA/RWZ- CNC H) In-feed and rotating system ZWA-1- CNC I) CARCASE CLAMP PRESS Mod. KP-3- CNC, through-feed system L) Out-feed transfer

Condition: excellent (used), Electronic Programmer NC 400 Software Biesse Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Rsdpsd Nuwijfx Ahzjbt Dowels inserting nozzles (and Glue Injectors) N. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 Bottom vertical units/supports (N°) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Motorized carpet to evacuate chips and wastes The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: Rbedpfohvagkex Ahzet 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: excellent (used), BATCH-SIZE ONE - FULL CNC Flexible LINE for Drilling, Routering and hardware Inserting process, for the Front doors (of furniture). With Numerical Control NST panle PC W2k (FERRO CAN BUS) Composed by: A) WORKPIECES LOADING SYSTEM (Infeeding Hedgehog Buffer) B) FLEXIBLE DRILLING-INSERTING MACHINE Mod. BAT-RTW-CNC Rbjdonvfrpepfx Ahzjt With 4 working stations: - Station No. 1: Workpieces (panels) in-feed and positioning - Station No. 2: Drilling and routering - Station No. 3: Inserting (hinges, adapters and shock absorbers) - Station No. 4: Workpieces (panels) release and out-feed C) WORKPIECES UNLOADING SYSTEM (Outfeeding Hedgehog Buffer) To process panels with following dimensions: - LENGTH: MIN mm (194) 270 - MAX mm 1450 (1500) - WIDTH: MIN mm 130 (120) - MAX mm 700 - THICKNESS: MIN mm 13 - MAX mm 40

Year of construction: 1995, condition: used, machine/vehicle number: ref. BM4933, Ref. BM4933 top machine! This machine puts inserts into envelopes Inserter stations (2) safety features double-/missing sheet detection air suckers feed from bottom of pile envelope counter Rbodpfxjbzlzxo Ahzst Insert dims 156x244 to 84x114mm envelope dims max 156x244mm min 89x171mm working speed up to 10.000 envelopes/hr variable speed adjustement

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gear motor 2.2 kW with 21 spindles Spindle spacing 32 mm with integrated oil damping Height adjustment 80 mm Drilling depth 80 mm Dimensions: 140x88x160 Weight 420 kg Availability: short notice Location: Flörsheim Redpfxekwg Rcs Ahzebt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2800x1100x2200 mm Weight 1100 kg Rsdpfxevz Hwao Ahzebt Total power requirement 8,8 kw Horizontal and vertical drilling machine MULTI MZ3x8 - Max. Center Distance Between Holes 2440(L)mm x 300(W) mm- Min. Center Distance Between Holes 220(L)mm x 32(W) mm - cess length 2440 mm - cess length 220 mm - Plate thickness 12~40 mm - Total number of drilling bit 32pcs - Horizontal backside drilling rows 4 rows - Max. drilling dia. 35 mm(Single bit) and 13 mm (Multi)- Max. drilling depth 50 mm - Dia. of drilling bit shaft 10 mm - Length of drilling bit 57 mm/70 mm - Drilling bit speed 2840 rpm - Qty of horizontal L&R drilling rows 2 rows - Qty of vertical up drilling rows 2 rows - Air pressure 0.5~0.6 Mpa - Total power 8.8 kw - Net weight 1100 kg - Overall dimension 2800 x 1100 x 2200 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 560x500x580 mm Weight 80 kg Total power requirement 0,75 kw Rsdpevz Hf Dsfx Ahzsbt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x930x1080 mm Rjdovz Et Hopfx Ahzobt Weight 390 kg Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x1050x110 mm Weight 350 kg Rjdpfjvz Er Ajx Ahzsbt Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1100x1350 mm Rbodpfx Ahsvz Eizszjt Weight 500 kg Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1780x850x1250 mm Weight 1000 kg Total power requirement 12 kw Rsdpfsvz Egaex Ahzobt

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW Rodsxc Hi Uspfx Ahzebt Drilling unit: swiveling

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Rbjdpfxswv Nb Ne Ahzet Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling

Condition: used, Log feeder with limit switches and motor. Length 6.30 m, width 1.70 m, height 1.15 m, weight under 5 t. Ex works price: 6,000 EUR. Rsdpfxexdckqs Ahzsbt

Condition: used, machine/vehicle number: 007870, Max. panel width: 3200 mm Rbodpswimz Hefx Ahzst Max. panel length: 800 mm No of Bottom Units: 2 No of injectors: 12

Condition: used, machine/vehicle number: 005448, Max. panel width: 3000 mm Max. panel length: 1350 mm Redpfx Aowcydzohzobt No of injectors: 24

Condition: used, machine/vehicle number: 006158, Max. panel width: 1000 mm Max. panel length: 2500 mm Rbodpeiwptuefx Ahzjt No of injectors: 14 Positioning of Units by NC: yes