Used Folding Inserting System for sale (37,654)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 Nwsdpfxjwml S Eo Ahvsd - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour Nwedpoyxm Hzsfx Ahvod

Condition: used, Format: Equipment: Speed: 4,300 cycles per hour Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Set Thickness: 2.5mm Reverse Reading: Yes Cascade Feeding from all Feeders: Yes Nodpfx Ahox N Ng Eevjwd High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)

Condition: good (used), functionality: fully functional, 3 inserts for Multifix, size C, Nwedpfx Ahsykqzfjvsd

Condition: like new (used), Frama Inserting Machine, Type DI380 Processes 3000 pieces/hour (folding and inserting) Folding types: C-fold, Z-fold, single-fold, double-fold Sealing: Yes Paper input capacity: 325 Nwodsyir Htjpfx Ahved Insert input capacity: 100 Envelope input capacity: 100

Year of construction: 2013, condition: ready for operation (used), A complete gray fabric preparation and further processing line with butt seam sewing machine as well as an automatic double, folding and measuring system from MontiMac Italy is available. 1) Gray preparation line MontiMac model 1090, year of manufacture: 2013, material: cotton, fabric width range: 1800mm/3000mm, seam type: butt seam, material feed: pallets/bales, max. roll diameter: 500mm, sewing unit: TA21-3FY, cleaning brushes: 2. Including inspection table, brush cleaning unit, dedusting and fabric outlet. 2) Super automatic double, folding and measuring machine MontiMac Lafra 200TDD with pallet based design, double triangle usable width, machine usable width: 1600mm, max. fabric package folding height stacking height: 2000mm, max. table load: 1500kg. Including fold counter, control measuring system and length counter. 3) Butt seam sewing machine MontiMac TU03/105 with movable frame. Documentation available. On site inspection is possible. Nwsdpfxsyhqcde Ahved

Condition: good (used), functionality: fully functional, 4 inserts for Multifix, size C, Nedpsya El Djfx Ahvswd

Year of construction: 2007, condition: reconditioned (used), We have available a complete Mueller Apparatebau unwinder, cutter, merger and folding module to fold A4 documents. 6802 - Unwinder 6948 - Reading module - s/n 54977 used 6612 - CF Cutter - s/n 59028 used 6950 - Merger - s/n 61778 used 6895 - Accumulator - s/n 58225 used 6626 - Folder up-up - s/n 58903 used 6822 - Folder STOPP function s/n 58617 used 6896 - Transport module - s/n 55747 used 6815 - Transport module STOPP function - s/n 55728 used We do have other Mueller Apparatebau modules available. Let us know what you are looking for! Nwjdpfxeinifhe Ahvod

Condition: refurbished (used), Year of construction: 2009, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2009 Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder Nodpfov Ebx Hox Ahvswd - Divert bin - Autoloader envelope station - Turning belt with alignment table - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: used, Year of construction: 2012, We have a KAS C4 465 HS envelope inserting system, year 2012, available. Counter is 4.509.335. This envelope inserter can process DL up to C4 envelopes. C4 envelopes with the flap on the long side. Configuration: Nwodjwqpipjpfx Ahvsd - Single sheet feeder - Folding feeder in-line - 3 insert feeders (bottom feed) - insert feeder in line - Envelope section - Conveyor belt We sell this machine as is or after complete maintenance

Condition: used, Year of construction: 2009, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2009 Nodpfowmmh Iox Ahvjwd Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Turning belt with alignment table - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: excellent (used), Year of construction: 2010, Very nice inserting system for DL, C5 and C4 envelopes which has only 1 mil cycles, 2D Data Matrix camera reading code, accumulator, double fold unit, turnover and shingling conveyor. Nwodpfjh H Iuasx Ahvjd

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101258050, Submission of a bid constitutes an obligation for timely collection no later than 31/12/2025! The offer includes: Bacciottini Pit Stop WFD2H Speed (Serial number: WFD2H 1010, Year of manufacture: 2010) MB PFNET 52/4-40-ART52 (Serial number: 101258050) TECHNICAL DETAILS Number of pockets: 4 EQUIPMENT 2-bar scoring system Inline Nedpfxoxyh E Sj Ahvowd Extended feeder MB folding machine Gatefold pocket Delivery

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Nwsdpfjvwlqqex Ahvod Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2015, Low-usage envelope inserting machine with the following configurations - 2 feeder stations for unfolded documents with large capacity (325 sheets) - 1 feeder station for enclosures with large capacity (300 inserts) - 1 feeder station for envelopes (DIN long, C6/5, C5 and other formats) - Daily mail function for up to 5 sheets - Capable of processing extra-long documents - Paper length: 127-406 mm - Paper width: 127-229 mm - Envelope formats: DIN long, C6/5, C5 or 88x220 to 164x242 mm - "Flip-flop function": automatic switching when a feeder tray is empty - Automatic double and misfeed detection - Automatic adjustment of fold lengths (no opening/adjustment required) - Automatic height adjustment of the address field - 4 fold types: single, letter, Z, double-parallel fold - Up to 20 programs can be stored - Large display with graphical and text display - Up to 8 sheets/envelope - Up to 3,500 cycles/h Nodpfjiyx Ixjx Ahvjwd - Counter reading: 249,103 cycles

Condition: good (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K 6 station base Nedpfx Ahsukpimevjwd 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Envelope station autoloader Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just arrived and will be available shortly when it has passed through our complete maintenance program. Then the machine is 100% complete and will work like new. Please come over for a test if you like.

Condition: good (used), axle configuration: 2 axles, first registration: 10/2021, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 275/70R22,5, color: other, Year of construction: 2021, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Remarks = Number of axles: 2, twin tires, unladen weight: 7,450 kg, gross weight: 35,000 kg, type of chassis: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, ABS, EBS, body year: 2021, tail lift, tail lift version: rear platform, tail lift capacity: 1,500 kg, tail lift manufacturer: b.a.r, tail lift material: aluminium, tail lift size: 200x254, System Trailers manufacturing, Kelberg brand = More Information = General information Cab: day cab Registration: KLEYN1 Driveline Fuel type: diesel Transmission Transmission: manual gearbox Axle configuration Tyre size: 275/70R22.5 Brakes: disc brakes Suspension: air suspension Axle 1: twin tires; lift axle; left inner tyre tread: 10 mm; left outer tyre tread: 10 mm; right inner tyre tread: 10 mm; right outer tyre tread: 9 mm Axle 2: twin tires; steered; left inner tyre tread: 11 mm; left outer tyre tread: 10 mm; right inner tyre tread: 10 mm; right outer tyre tread: 9 mm Weights Unladen weight: 7,450 kg Payload: 27,550 kg gross vehicle weight: 35,000 kg Functional Tail lift: b.a.r, rear platform, 1,500 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, all years of manufacture, and all price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing selection • Recognisable quality • Good prices • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are arranged quickly • Expert technical services • The security of “recognisable quality” • And more…. Please visit our website for special offers and the full inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an enquiry via our website. Nodpewb Saxjfx Ahvswd Ask directly about our European warranty package.

Condition: used, axle configuration: 1 axle, first registration: 05/2020, loading space length: 11,150 mm, loading space width: 2,450 mm, loading space height: 2,670 mm, total length: 11,650 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2020, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Remarks = Number of axles: 1, Curb weight: 5,720 kg, Gross weight: 25,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2020, Axle type: BPW, Tail lift, Tail lift version: Rear flap, Tail lift capacity: 1,500 kg, Tail lift manufacturer: B.A.R cargo lift, Tail lift material: Steel, Tail lift size: 200x254, Manufacturer: System Trailers, Kelberg brand = Additional Information = General Information Cab: Day cab Registration: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Left tire tread: 11 mm; Right tire tread: 9 mm Weights Unladen weight: 5,720 kg Payload: 19,280 kg Gross vehicle weight: 25,000 kg Functional Tail lift: B.A.R cargo lift, rear flap, 1,500 kg Nwjdpfx Ahjwbzqgevod Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Import and transport support • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the complete inventory. Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm weight 950 kg Equipment: - 4 feet - basic equipment 650 mm Nwsdpoyxhh Hofx Ahvjd - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures

Condition: used, table length 2400 mm table width 1200 mm Nwodpfxsyxhhys Ahvjd table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: new, table length 2000 mm table width 1000 mm table height 300 mm bore 28 mm weight 830 kg Equipment: - 4 feet - basic equipment 650 mm Nwodpfxsyxhhte Ahvsd - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable Nwjdpfx Aheyw Hwkevsd -Height: max. 710 mm -Rollers: Ø 48 x 15 mm -Number: 2x roller conveyor available -Price: per piece -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc.

Condition: excellent (used), RENISHAW System 3R-656.31-3 Macro probe with 3 mm stylus ball. Used. Fully functional. Nsdpfsyk T Hdjx Ahvewd

Condition: excellent (used), RENISHAW System 3R-656.31-5 Macro probe with 5 mm stylus ball. Used. Fully functional. Nwodpfxjyk T Ets Ahvjd

Condition: excellent (used), 3 pieces Collet chuck adapter, 20 mm shank, equivalent to 3R-653 Mini holder chuck adapter 3R-653 for 20 mm shanks Incl. drawbar Equivalent to: Nwedpfxew E Hice Ahvsd Manual chuck adapter, Macro-Mini, 3R-653 Incl. 3 pieces drawbar 3R-605.1E Unit price: €200