Used Dovetailer for sale (168)

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Nodpfjx E Um Nsx Ad Nscl Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: excellent (used), Hundegger K2 Industry 5-Axis CNC Timber Joinery Machine 5-axis machining capabilities – Maximum machining section: 300 x 620 mm Machining operations: Section probe detector, section measurement – Cutting: All straight cuts and any angle, horizontal and vertical, birdsmouth, valley and hip rafters, rebates, half-lap joints, chamfering, groove, straight and angled birdsmouth groove, web notch – Milling with aggregate head (hogging head) and other milling cutters, mortise and tenon, mortises, notches, scarf joints, dovetail joints (straight and angled), Gerber scarf – Drilling: straight and angled, deep-hole drilling – 1x side drill and 1x underside drill. Ink marking system – Piece identification labelling Control console and software: The control system allows importing data from CAD software and automates the calculation of complex machining operations. Work is currently performed with CADWORK software (not included in the sale of the machine). The machine features a pit designed for the elimination of wood waste and sawdust. This HUNDEGGER K2 CNC is fully upgraded and refurbished! Dimensions: - Machine: Length 22,900 mm x Depth 5500 mm x Max. height 2550 mm (on the floor) - Waste pit: approx. Length 12,000 x Width 2,400 x Depth 950 mm - Timber feeding length: 13,000 mm - Max. timber output length: 13,000 mm - Transverse infeed conveyor: 5 chains, 2,200 mm - Extendable timber support table - AQF feed chain with shaft extension, 2,900 mm - Under-table pivoting crosscut saw - Right-hand safety flap Waste evacuation system located below – Control for waste extraction system – Universal 5-axis milling unit with profiling tool, dovetail cutter, multiple finger joint cutter, combined vertical tool holder, drilling unit, finger joint cutter, combined horizontal tool holder, rebate unit / Drilling unit 1 and 2 – Marking device – Pneumatic beam turn-over station – Outfeed table with 7 arms Year of manufacture: 2003 Nodpfjx U Ti Uox Ad Necl Purchased by current owner in 2020. Machine was fully reconditioned in 2020: electrical, mechanical, pneumatic, tooling, and IT systems (dismantling parts and motors, replacement of bearings, hoses, cables, guideways, IT update and EKP data export, cleaning, new tooling in 2020) The machine is in very good technical and visual condition.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 0-390-91-0009, WEINMANN WBZ 160 Powersix timber processing centre. Equipped with a 5-axis saw, 4-axis tool-changing spindle, and a 12-position tool changer. Ncodpfx Aex Eimued Nsl Perfectly configured for efficient machining of complex structural elements. The 4-axis spindle enables the use of a carefully selected range of tools, such as a milling cutter and drill bit, allowing the execution of hips, jack rafters, halving joints, tenons, and dovetail joints. Soundproof enclosure around the entire machining unit. Safety door with interlock system. CE compliant.

Condition: new, Year of construction: 2025, saw blade diameter 370 x 3,0 x 40 mm cutting diameter 120 mm stroke -- mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round li. 120 / re. 105 mm capacity 45 degrees: square li. 100 / re. 100 mm capacity 45 degrees: flat li. 130x100 / re . 130x10 mm capacity 60 degrees: round 110 mm Ncsdpfx Adovuz Rnj Nel capacity 60 degrees: square 90 mm capacity 60 degrees: flat 90 x 100 mm total power requirement 1,8 / 2,2 kW weight of the machine ca. 392 kg dimensions of the machine ca. 700 x 900 x 1800 mm Description: - Mitre left 60° + right 45° - Clamping block with double clamping arm - Robust prism guide for the saw head (adjustable dovetail guide) - Chip brush - Automatic cooling - Metal handle for high clamping force - Solid, strong cast iron table

Condition: new, x-travel 600 mm y-travel 250 mm z-travel 400 mm Ncedpfxoxaa Hze Ad Nsl spindle taper ISO 40 ISO table: 1120 x 260 mm feed: 24 - 402 mm/min. turning speeds 45.0 - 1660 U/min distance spindle /table 175 - 520 mm rapid traverse Z Achse 660 mm/min throat 0 - 550 mm total power requirement 2.2 kW weight of the machine ca. 1380 kg range L-W-H 1570 x 1470 x 1660 mm Equipment: - Universal milling head, adjustable to all angle positions - Swiveling control panel with ergonomically positioned switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable wedge strips in all 3 axes - Very smooth running thanks to ground gear wheels running in an oil bath - Positioning motor for z-axis included in delivery - Automatic table feed in x and y axes as standard - Precisely surface-machined cross table with T-slots - Digital position display for x, y and z axes included in delivery Scope of delivery - 3-axis digital display ES-12 H with LCD display - LED machine light - Coolant system - Central lubrication - Counter bearing - Long milling mandrel 32 mm - Feed for x and y axes - Positioner motor for z-axis - Coolant pan - Adjustable protective device - operating tool

Condition: used, Dovetail guide wedge bar, linear bearing, linear rail, linear guide, guide rail, linear guide rail, profile rail, slide rail Njdpfxouzn Ece Ad Nocl -Guide rail: Linear guide rail, wedge-shaped for dovetail guide -Rail length: 620 mm -Total width: 31 mm -Rail height: 15/3 mm -Dimensions: 620/31/H15 mm -Weight: 0.8 kg

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 265 by 215 mm, 30 mm high -Drawing: in the photos Ncsdpjd Aqtusfx Ad Njl -Number: 2x counter bearings available -Price: per piece -Dimensions: 390/130/H260 mm -Weight: 30 kg

Year of construction: 2012, condition: used, Clamping plate with threaded hole and cross table, clamping angle, T-slot table, rotary table, milling machine table, upper support, top slide, dovetail guide, tool slide, cross table, cross support Nedpfskm Rn Sjx Ad Nscl -Manufacturer: Santenberg, clamping table: milling machine table from CNC machining center GTC S 2 -Linear guide: THK YNA419 -Shaft: Ø 20 x 45 mm -Dimensions: see photos -Total dimensions: 715/530/H285 mm -Weight: 222kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Nedpfx Adjb Uhvqj Njcl -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12/2.DF1 KNS 51.15.20 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/1100/H1200 mm -Weight: 625 kg

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine Nedpsxfhytsfx Ad Necl -Counter bearing: for milling machine -Bore: Ø 40 mm / height 108 mm -Dovetail: 79 to 59 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 140/73/H155 mm -Weight: 3.6 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x Perske motors -Engine type: KCS 70.12-2D -Power: 3.0/4.4 kW Ncodpfx Ajb R Ua Ejd Nel -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1100/600/H1330 mm -Weight: 340 kg

Condition: used, Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Abutment: for milling machines -Dovetail: 220 to 165 mm -Bore: Ø 85 mm -Dimensions: tech. Drawing with the photos Ncedpfx Adeitdi Ds Nsl -Dimensions: 400/145/H290 mm -Weight: 13.5 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for: joint milling -with: heavy dovetail guide Njdpfx Adsdx Aiwe Njcl -Milling unit: swiveling -3x: Perske Motors -Engine 1: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Engine 2: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Motor 3: Type KNS 51.14-2 D -Power: 1/2 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2750/5700 rpm -Other engines with different performance levels are available from us for an additional charge. -Number: 1x joining milling unit available -Price: per piece -Dimensions: 1370/1100/H1330 mm -Weight: 608 kg

Condition: good (used), Reciprocating saw, dovetail saw, tiger saw, saber saw Njdpfx Adofdta Ie Nscl -Flex reciprocating saw: SK -Nominal power input: 1200 W -in :suitcase -Dimensions: 610/120/H250 mm -Weight: 5.8 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool slide: Support slide support carrier with turning tool holder -Clamping height: 40 mm -Dimensions: see photos Nedpfx Adewcwizo Nscl -Dimensions: 370/180/H170 mm -Weight: 17.8 kg

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / height 150 mm -Dovetail: 140 to 115 mm 22 mm high -Dimensions: see technical drawing in the photos Ncodpfx Aoxfhygjd Nsl -Dimensions: 215/80/H210 mm -Weight: 6.8 kg

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 30 mm / height 64 mm -Dovetail: 174 to 145 mm 22 mm high Ncedpfov Uxrpex Ad Nel -Dimensions: see technical drawing in the photos -Dimensions: 235/67/H115 mm -Weight: 4.7 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide Nodjwcw S Nepfx Ad Nocl -Tool slide: Support slide lower part support carrier -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -2x engines Perske -Motor 1 type: KNS 71.16/201 -Power: 4.4/6.6 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Motor 2 type: MP-10-L -Power: 1.0/1.5 kW Ncsdpfxob Uhi Ne Ad Nol -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 3000/6000 rpm -Other engines with other services in stock for an additional charge -Number: 1x joint milling units available -Price: per piece -Dimensions: 900/1000/H1030 mm -Weight: 360 kg

Condition: used, Quick-change tool holder, tool holder head, quick-change tool holder -Mounting dimensions: dovetail width 39 mm see photos Ncedsr U Sf Iepfx Ad Njl -Price per piece -Quantity: 3 pieces -Dimensions: 86/38/H60 mm -Weight: 0.8 kg/piece

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 145 by 190 mm, 30 mm high -Drawing with the photos -Dimensions: 290/85/H210 mm -Weight: 12 kg Ncsdpfx Adsb A I Uts Nel

Condition: good (used), Mounting plate with threaded hole and cross table, clamping angle, T-slot table, rotary table, milling machine table, top slide, top slide, dovetail guide, tool slide, cross table, cross slide Nsdskvrp Eopfx Ad Nscl -Manufacturer: Santenberg, upper support tool slide from CNC machining center GTC S 2 -Drive shaft: Ø 20 x 45 mm -Dimensions: see photos -Dimensions: 720/550/H320 mm -Weight: approx. 194 kg

Condition: used, Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount -Dimensions: 1550/560/H735 mm Ncedjrc Ik Hepfx Ad Nel -Weight: 555 kg

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine Nsdod Aqtvopfx Ad Nscl -Dovetail: 275 by 220 mm, 40 mm high -Drawing: in the photos -Quantity: 1x counter bearing available -Price: per piece -Dimensions: 450/110/H300 mm -Weight: 12 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x Perske motors -Engine type: KCS 70.12-2D -Power: 2.7/4.5 kW Ncjdpfx Aeb R Ua Nod Nol -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1060/660/H1010 mm -Weight: 326 kg