Used Die Head for sale (14,115)

Year of construction: 2014, condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Kedpfoh St D Hox Ad Nowt Z-AXIS TRAVEL: 500 mm MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg MAX PIECE SIZE: 1200 x 800 x 350 mm TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI.

Condition: good (used), Thread cutting machine, pipe thread cutter Kodsx I Agpepfx Ad Nowt -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm Kjdpfoya Iaqex Ad Njwt - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electrically adjustable planing thickness - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Feeder with centering device: - Roller width: 450 mm Ksdpfxeya Hiqs Ad Njwt - 1 toothed powered infeed roller - 22 smooth powered rollers - Adjustable upper pressure - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table Kwodpekvrptsfx Ad Njt -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Condition: used, Year of construction: 2011, machine/vehicle number: 26260117, fuel type: diesel, Empty weight: 3.400 kg Lifting capacity: 200 kg Working height: 2.600 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Max. horizontal reach: 1350 m Kodpotr Ny Dsfx Ad Nswt Transport dimensions (LxWxH): 6.68x2.1x2.95 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 819 h, machine/vehicle number: 2090426, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.650 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Max. horizontal reach: 830 m Transport dimensions (LxWxH): 6.75x2.3x2.3 Please contact PFEIFER GROUP for more information Ksdstr H H Tepfx Ad Nowt

Condition: used, Year of construction: 2022, operating hours: 570 h, machine/vehicle number: 2107039, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.650 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Kwodstr Inzepfx Ad Net Max. horizontal reach: 830 m Transport dimensions (LxWxH): 6.75x2.3x2.3 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, operating hours: 16 h, machine/vehicle number: 2109053, axle configuration: 4x4, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.200 kg Mast: articulated arm Lifting capacity: 230 kg Ksdstr Im Dspfx Ad Newt Working height: 1.600 cm Max. horizontal reach: 830 m Transport dimensions (LxWxH): 6.75x2.3x2.27 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, operating hours: 585 h, machine/vehicle number: 2109401, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.200 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Max. horizontal reach: 830 m Transport dimensions (LxWxH): 6.75x2.3x2.27 Kwjdpetr Imrefx Ad Not Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 2,200 kg, In working condition, removed from production, documentation available. Kwedpfx Aoxyyrqsd Njt

Condition: used, Year of construction: 1979, pressure 18 t diameter 250 mm Kwsdpfjvzxp Iex Ad Nst stroke 150 mm distance between columns 210 mm max. distance table - ram 400 mm power capacity 5,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,0 x 1,0 x 1,8 m hydraulic die-hob press with oil-hydraulic drive, controllable dependent on pressure/time as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, inner taper of milling spindel / Ksdpfx Asl Ichvjd Newt collet diameter / turning speed range / U/min

Condition: used, inner taper of milling spindel / Kwsdpfohprk Hox Ad Nst collet diameter / turning speed range / U/min

Condition: used, inner taper of milling spindel / collet diameter / turning speed range 1500 U/min Kwodpfx Ajhwt Eljd Nst

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Kjdpfx Ashmmfkod Nowt Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 Ksdpfoxpqy Dox Ad Nswt CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm Kjdpfxsxddwre Ad Nowt - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 Kjdpfjw Iq Ugox Ad Newt - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 1979, functionality: fully functional, Milling head MAHO MH 800P SK 40 taper Automatic tool draw-in Quill feed Kjdsx E Tc Nepfx Ad Nswt

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Angle head: 360° adjustable Weight: approx. 8 kg Kjdpfx Adoyaabgo Nowt The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Kedpowqgitsfx Ad Newt Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm The pipe head was in operation for about 1 year, due to business closure. Condition not new but in very good condition Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: used, We have different type of Pump-Heads as well. Operating Temperature: 0° to 40°C (32° to 104°F) Storage Temperature: −45° to 65°C (−49° to 149°F) Chemical Resistance: ABS plastic case with polyester label; gold, iridite-coated aluminum chassis; zinc-plated screws. All materials withstand standard cleaning solvents Line Voltage Limits: 230 V, 50–60 Hz Power Output: 0.075 kW (0.1 hp) Maximum Current (230 V units): 1.1 A, shorted output conditions Start/Stop – Local Control Input Voltage: Disable 15 V DC (typ) Enable 0.8 V DC max Start/Stop – Local Control Input Current: Disable 100 µA max leakage Enable 15 mA max Maximum Torque (300, 600 rpm units): 13 kg·cm (180 oz-in) Maximum Torque (1100 rpm units): 26 kg·cm (360 oz-in) Speed Regulation – Line: ±1% Speed Regulation – Load: ±2% Speed Drift: ±10% Kwodpfx Adjycgpve Net Enclosure Rating: IP23 per IEC529 Humidity (non-condensing): 10% to 90% Altitude: Less than 2000 m Display: Green LED Dimensions (L × W × H): 292 mm × 203 mm × 184 mm (11-1/2 in × 8 in × 7-1/4 in) Weight: 25 kg (55 lb)

Condition: used, Double-head cutting saw with 3 controlled axes, featuring automatic movement of the movable head and electronic management of all cutting angles from 45° (internal) to 15° (external). Blade feed is driven by a pair of oil-pneumatic cylinders. Kwjdpfx Ajyaqu Red Njt MAIN FEATURES *Electronic control of X axis *Standard X-axis positioning speed (m/min): 25 *Movable head position detection via direct measuring system with absolute magnetic strip *Cutting unit tilt detection via direct measuring system with absolute magnetic strip *Electronic control of intermediate angles *Max internal angle: 45° *Max external angle: 15° *Oil-pneumatic blade feed *Useful cutting length (mm): 5,000 *Carbide blades: 2 *Max blade diameter (mm): 550 *Blade motor power (kW): 2.64 *ELECTRONIC PROFILE THICKNESS MEASURING DEVICE *LABEL PRINTER *Front local safety guard with pneumatic operation *Minimal oil diffusion lubrication system *Prepared for automatic start of external dust extractor *Pair of horizontal pneumatic clamps with “low pressure” device *Pair of horizontal clamps with vertical clamping system *Mechanical intermediate profile support *Roller table on movable head with mechanical profile supports in assisted mode *Weight: 1,480 kg

Condition: used, Double-head cutting-off machine – Tekna TK 154 Technical specifications: Blade: Ø 500 mm Kedpsxbr Itjfx Ad Nowt Maximum cutting length: 4000 mm Blade tilt: outward Tilt angle: 90°/22.5 kW Voltage: 380 V Power: 7 HP Dimensions: 5200 x 1650 x H 1700 mm (max 2100 mm) Weight: 1260 kg