Used Demag Ac 155 for sale (500)

Condition: used, mileage: 41,000 km, color: white, lifting height: 3,600 mm, Year of construction: 2017, operating hours: 6,786 h, Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: Daimler AG Weights Empty weight: 24.376 kg Functional Mast length: 3.740 cm Lifting capacity: 40.000 kg CE mark: yes History Number of owners: 1 Identification Serial number: 256064 / WMGGA2LB4HM4FA064 Other information EPA Marked: yes Tyre brand: Bridgestone Emission level: Stage IV / Tier IV final Delivery terms: EXW Carrier engine: OM 936LA Counterweight: 5500 Transport dimensions (LxWxH): 10,669x2,55x3,33 Itsdpfx Aoxfp Hhsfion Production country: DE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 43168448, Electric motor for DEMAG AC hoist Type: KBH100 B 4/12, Serial No: 43168448, 1.00/0.28 kW 25/15 % ED, 1390/425 rpm., IMB14 with brake (complete set) Itjdeu Dkyzopfx Afien ANR: 61607700 ASN: 00901

Condition: used, Column-Mounted Crane DEMAG type PK1 N-F Capacity: 125 kg Itsdpsxpubxjfx Afion Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist Chain exit: length 2100 mm In good condition Voltage: 380 V Weight: approx 250 kg

Condition: good (used), functionality: fully functional, mileage: 114,363 km, power: 205 kW (278.72 HP), Year of construction: 2010, operating hours: 11,000 h, Equipment: all wheel drive, - Max. load capacity: 35.1 t - Telescopic boom max. extension: 31.2 m - Chassis engine: M-Benz OM906LA, 205 kW - Tires: 445/65R22.5 Itedpfx Afjxm S H Hjisn - Hydraulic outriggers - Head traverse: 5.45 t - Assembly jib: 1.2 m / 3 sheaves - Lifting capacity: 18 t

Condition: excellent (used), mileage: 203,229 km, fuel type: diesel, color: yellow, first registration: 10/2003, Year of construction: 2003, operating hours: 24,503 h, Technical Information Number of cylinders: 6 Dimensions Dimensions (L x W): 1,027 x 255 cm Isdpfxsw I A Dms Afiotn Weights Unladen weight: 47,900 kg Payload: 100 kg GVW: 48,000 kg Functional Mast: Articulated boom Mast length: 64 m CE marking: yes Condition Technical condition: very good Visual condition: very good Further information Please contact John de Koning for more information.

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Iedpfx Asxd Tpdofijtn Price: Upon request

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Iodpswk Aw Hofx Afiotn Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Itedpfx Afjt Dx Hbeion Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Condition: used, Year of construction: 1998, Clamping force: 60 t Isdpfxovurhqj Afijtn Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Type: Horizontal Drive: Hydraulic

Condition: new, DEMAG frequency inverter with resistor unit - 2 pieces 1 type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistor unit ( new ). 2 Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistor unit ( used ). Itedpfx Afju Uvi Tsien

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Isdpfowk T Uiex Afietn Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 221,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Drive: Wheel Weights Empty weight: 22.000 kg Isdpfx Afswwqbysietn Functional Lifting capacity: 30.000 kg Identification Serial number: 86584 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.3x2.4x3.45 Additional information Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 40 mm Clamping Unit Clamping force 1600 kN Additional Equipment Robot Demag DR711 available at extra charge. This DEMAG Systec 130/475-430 was manufactured in 2011. It features a clamping force of 1600 kN and tie bar spacing of 475x475 mm. The screw diameter is 40 mm, and it includes both pneumatic and hydraulic valves. An additional robot, Demag DR711, is available at an extra charge. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Systec 130/475-430 machine we have for sale. Contact us for more information. Application Types Injection Moulding Iedpfxoxpknbs Afietn

Condition: excellent (used), Year of construction: 2017, operating hours: 10,800 h, clamping force: 4,200 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Demag Systec 420/820-2300 (Servo) General Information Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control: NC5 Operating hours: 10,800 RbH Clamping Unit Clamping system: 420/... Clamping force: 420 t Platen dimensions (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mould height (min.–max.): 380 – 1050 mm (extended by 225 mm) Maximum daylight between platens: 1050 mm Mould opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever design with central oil lubrication Injection Unit Injection unit type: …/2300 Ijdpfoxpuvcox Afijtn Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, standard L:D) Additional Equipment Servo rotary adjustable pump Technology (activeDrive) Pneumatic valve 5/2 No. 1 for movable mould parts (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle heating band (socket) 2 core pull circuits controlled by proportional valves, independent of pressure (programmable, equipped with unlockable check valves to prevent core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position adjustment, freely programmable independent of P/F+v, parallel to mould movement Ejector motion controlled by proportional valve, infinitely adjustable Reinforced oil cooler (cooling water inlet up to 35°C)

Condition: used, Year of construction: 2009, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: Description SGM Operating hours Cycle counter Itsdpfexpufdex Afien Cylinder heating Electric drives Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Demag 210: Screw diameter Ø 50 mm

Year of construction: 2000, condition: ready for operation (used), Four injection molding machines from various manufacturers are available. 1) Arburg Allrounder Centex 420C 1000-350, year of manufacture: 1996, clamping force: 1000kN, heating power: 8.6kW, weight: approx. 3850kg. The door interlocks of the machine are defective, and both control blocks are leaking oil. 2) Battenfeld BA 500-200 CD Plus, year of manufacture: 1991, weight: approx. 2500kg. The machine shows general oil leaks, the motor is missing, and the radial piston pump is presumably defective. 3) Demag Ergotech Concept 1000/420-310, year of manufacture: 2000, screw diameter: 32mm. The end plate of the machine is cracked, and there are small oil leaks. 4) Demag Ergotech System 80-310, year of manufacture: 1996, max. operating pressure: 210bar, screw diameter: 35mm, cores: 1. Including Geiger handling unit. The door interlock is defective, and minor oil leaks are present. Documentation available. An on-site inspection is possible. Ijdpexn S Tpjfx Afistn

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 8200 Itjdpoxpknhsfx Afien Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 2000 This DEMAG Extra 200-840 hydraulic injection moulding machine was manufactured in 2008. Ideal for precision plastic processing, it offers robust functionality and reliability. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Isdpexn N H Tsfx Afistn Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: used, Year of construction: 2007, Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 Iedoxpudmopfx Afietn Designation: SGM Operating hours: 29,125 Cycle counter: 26,530 Total cycles: 3,562,329 Cylinder heating, electric drives Sumitomo Demag IntElect 150/520-610 Demag 150: Screw diameter Ø 45 mm

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 2400 mm Measurements depth 7800 mm Measurements height 2200 mm Machine weight 20000 kg Main Drive Distance between bars 810x710 mm Injection Unit Screw diameter 70 mm Shot weight 1090 g/PS Stroke volume 1212 cm³ Injection pressure 1877 bar Clamping Unit Clamping force 4200 kN Distance between bars 800x710 mm Isdpsxpkmdefx Afiotn Size of mold platens 1200x1100 mm This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm. Application Types Injection Moulding

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. Iedpsxpkuzjfx Afiotn Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Itjdexnd Sqjpfx Afijn Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Itsdpfx Afexmbv Dsien Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1998, Clamping Unit Clamping force 4200 Kn This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Iodpfxsxl H D Rj Afietn Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2005, Clamping Unit Clamping force 4200 Kn Itsdpexl H Dwefx Afion This DEMAG Ergotech 420/810-2300 was manufactured in 2005. It is a hydraulic injection moulding machine featuring a clamping force of 4200Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 420/810-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding