Used Pull Head for sale (11,429)

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, copy head, radius dresser, disc puller -Puller: Copy head for grinding wheel puller -Dimensions: see photos -Dimensions: 290/230/H170 mm Hodpfswuz Swex Apdsw -Weight: 14.1 kg

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner Hodpfs Afznusx Apdjw A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Year of construction: 1978, condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Equipped with: Retriever Puller Hydraulic System Coolant System Chiller Chip Conveyor Manuals Specifications: Hedpfortrzlex Apdsw Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Floor Space ( Width x Depth x Height): 65" x 96" x 243" Net Weight, Approximate: 79,000 #

Condition: used, Eckeneinziehmaschine Kolbus EP- Corner Pulling Machine Kolbus EP Year 1972 - Serial-No. 275 Hjdpfx As Agpzvjpdew Size max: 405 mm Accessories: 2-corner-pulling-heads Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Catalog number 7294 Hedpfx Apez Nlc Eodjw TECHNICAL DATA - Max. width of workpiece: 230mm - Min. width of workpiece: 15mm - Max. height of workpiece: 160mm - Min. height of workpiece: 10mm 7 spindles: 1) Horizontal, lower: 230mm, 7.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Vertical, right: 160mm, 5.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, upper: 230mm, 7.5kW 7) Horizontal, lower: 230mm, 5.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - Motor: 2 x 0.37kW - Spindle diameter: 40mm - All spindles equipped with a brake From above: - 8 feed rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, toothed, rubber, double rollers From below: - Feed roller, toothed, pulling, pivoting - 3 discharge rollers, pulling, metal, smooth - Rollers pneumatically pressed - Length of feed table: 2480mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth feed rate adjustment on a frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Diameter of dust extraction port: 7x125mm - Dimensions (L/W/H): 5520x1930x1900mm - Weight: approximately 4000kg ADVANTAGES – With 7 heads – Ideal for both wet and dry wood – With ATS – Original DTR documentation + CE – Unpainted – Used planer, in perfect condition Original photos Net price: 156900 PLN Net price: 36500 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), 1 used, very well-maintained universal milling head for retrofitting to conventional, NC, or CNC milling machines or boring mills of any kind, "HURON" system, swivels across 2 axes, every angle adjustable. Spindle taper ISO 50 Reach approx. 360 mm Rated drive power 10 HP Max. speed 1800 rpm Weight approx. 82 kg Accessories / Special features: • Manual tool clamping • Main spindle and all shafts/gears are made from case-hardened and tempered chrome-nickel steel • Two rotatable axes for infinitely adjustable angles! "HURON" system • Conical gears are ground according to the "KLINGELNBERG" system • The main spindle rolling bearings are high-precision tapered roller bearings Hjdpeyc Ei Usfx Apdew • 1 pull stud for tool retention This high-quality milling head was used as a loaner head and only deployed for repair purposes when the main head was being serviced or overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), CATALOG NUMBER: 6679 TECHNICAL DATA - max. width of workpiece: 250mm - max. height of workpiece: 170mm 6 spindles: 1) horizontal lower 250mm, 5.5kW 2) vertical right 170mm, 5.5kW 3) vertical left 170mm, 5.5kW 4) horizontal upper 250mm, 7.5kW 5) horizontal lower 250mm, 7.5kW 6) universal 250mm, adjustable at an angle of 360°, 5.5kW - 6 spindles with electric up/down adjustment - all spindles adjustable up/down, left/right - spindle diameter: 40mm - 6 toothed, pulling infeed rollers from above, including 2 double rollers - 6 pulling outfeed rollers from above, rubber, smooth, including 2 double rollers - 2 pressure rollers from above - toothed, pulling, swiveling infeed roller from below, in the bed before the first spindle - 2 pulling outfeed rollers from below, metal, smooth - 4 side pressure rollers from below - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment on a frequency inverter: 6-30m/min - feed motor: 4kW - working pressure: 8-10 bar - electric adjustment of planing thickness - body lifting motor: 1.1kW - central lubrication of the bed - length of the infeed bed: 2180mm - diameter of dust extraction nozzles: 6x150mm Hsdezxqvwopfx Apdew - dimensions (L/W/H): 5000x1800x1900mm - weight: approx. 4600kg ADVANTAGES - Made in Italy - With 6 heads - DTR + CE documentation - Ideal for both wet and dry wood - Universal spindle - In perfect condition / like new Net price: 114900 PLN Net price: 26720 EUR Net price calculated at an exchange rate of 4.3 PLN/EUR (prices may vary with significant exchange rate fluctuations)

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and Hodpfxoxltzve Apdow return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Hsdpfx Ajpu A D Aopdjw Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Hsdpfo Af E Irsx Apdew Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: excellent (used), 1 x stainless steel 14 head multihead Screw weigher complete with twin incline feed conveyor and exit conveyor. IP65 rated. Dimple pans for sticky and awkward products. Hsdpez Ak I Ujfx Apdsw Model TY-P14

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 7,000 h, machine/vehicle number: 0012, REM SC 33 CNC 2MS | Dual-Head CNC Vertical Turning Center | Ø3,300mm Hodsdpdfzopfx Apdow Heavy-duty CNC Vertical Turning Center with two independent milling heads and dual automatic tool magazines — built for continuous precision production of large components. CAPACITIES: • Max. Turning Diameter: 3,300 mm (per head) • Max. Machining Height: 2,000 mm (under cross rail) • Max. Workpiece Weight: 20 tonnes WORK TABLE: • Table Diameter: 3,000 mm • Speed (infinitely variable): 1–110 rpm • Main Motor Drive (AC): 100 kW MILLING HEADS (2×): • Each head with independent ATC tool magazine • Simultaneous or independent dual-head operation • CNC-controlled X, Z, W axes KEY ADVANTAGES: ✔ Dual-head configuration = double productivity ✔ Proven REM design — used in energy, mining, and heavy industry ✔ Rigid, thermally stable construction for long-term precision ✔ Full CNC control with digital drives Manufactured by REM Bacau – Romania | Over 60 years of VTL expertise. Machine available for inspection under power. Worldwide export. Contact us for full technical datasheet, video, and quotation.

Condition: good (used), Uchida Durselen UD-04 four-head paper drill The unit is in perfect, like-new condition! This is the latest, currently manufactured model. Made in Japan. The machine features a range of functions designed for ease of operation, including: – infinitely variable drill rotation speed, controlled via an inverter (VFD) – four drilling heads with independently adjustable positions – a sliding table equipped with a programming bar – spacers for simple setup when drilling holes at standard intervals for A4 and A5 formats – casters for easy mobility Technical specifications: Drill diameter: 2–10 mm Stack height: 50 mm Distance between heads: 45 mm – 380 mm Weight: 200 kg Power supply: 230V Automatic drilling cycle, operated via a foot pedal. Robust, pedestal-mounted construction. Waste directed into an external collection bin. Hedpfsz S Ulusx Apdsw Drill table adjustable in all planes, with front and side margin settings. Includes maintenance tools, a new drill block (cutting stick), and drill bits.

Year of construction: 2012, condition: good (used), functionality: fully functional, Weighing and vertical form, fill and seal bagging system, previously used to weigh and pack confectionery and snacks into block-bottom packs. This system comprises of the following machines/equipment: 1 x Yamato 14-head weigher with RCU 9 control panel and fitted with smooth weighing pans. Model - ADW-514AWCC. Serial number - 5611205. Weighing range - 4g up to 500g. Speed - up to 120 packs/minute, depending on product weight. 1 x Gainsborough Engineering Co. GV2 vertical form, fill and seal bagging machine with ICE Zodiac Hawk Printer. Serial number - GV121540. Date of manufacture - 2012. Sealing bars: Horizontal - 250mm long & Vertical - 430mm long. Forming tube - Rectangular, 80mm x 50mm. Pack types - Block-bottom, square-edge, or structured pouch. Hjds Agnlhepfx Apdjw 1 x Gantry/stand. Overall dimensions - 1455mm long x 1455mm wide x 1750mm high. 1 x Gainsborough Engineering Co. outfeed conveyor on height-adjustable feet. Outfeed height - 950mm high. Belt - flighted, 1800mm long x 200mm wide.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2023001552, overall weight: 550 kg, position of the milling head: Vertical, 2-axis A/C fork, total width: 655 mm, total height: 1,373 mm, mount diameter: 335 mm, type of input current: three-phase, torque: 67 Nm, rotational speed (max.): 24,000 rpm, pivoting range: 220 °, spindle motor power: 42,000 W, coolant supply: 50 bar, power: 42 kW (57.10 HP), Equipment: rotational speed infinitely variable, Unused HSD HST810-M two-axis fork head with ES510 electrospindle, HSD article H8099H0048, built 2023, never installed or powered. Supplied new by HSD S.p.A. (Italy) through HSD’s Australian partner in August 2023 and stored since then in its original HSD crates in a locked warehouse in Melbourne. The head is still sealed in HSD’s VCI bag on its steel transport frame (HSD works order OdL 2013060, production number 2023001552). Head HST810-M: A axis ±110°, C axis ±360°, HSD direct-drive torque motors (A 707 Nm max, C 1,250 Nm max), hydraulic brakes 2,000 / 4,000 Nm, Heidenhain RCN 8380 absolute encoders (EnDat 2.2), 2 arcsec, 180°/s, mass 550 kg, Ø335 g7 machine fitting, overall height 1,373 mm. Electrospindle ES510: HSK-A63, 42 kW S1 / 55 kW S6, 66.8 Nm S1 / 87.5 Nm S6, rated 6,000 rpm, max 24,000 rpm, air-oil lubrication, liquid cooled, hydraulic tool release, Lenord + Bauer 256 pulse 1 Vpp spindle encoder, rotary joint for through-spindle coolant. Included: HSD oil-air lubrication unit CC34250005 (24 V DC) and HSD 3-phase line reactor CCA4050012 (0.4 mH, 130 A), both in their HSD crates, and the HSD installation drawing H8099H0048 with SINAMICS and SIMODRIVE motor parameter sets. Suitable for 5-axis gantry and portal machines for aluminium, composites and light alloys. Siemens-ready; other controls need EnDat 2.2 capable drives. Condition and warranty: unused, 0 hours. The unit is outside HSD’s warranty period and is sold without manufacturer warranty. A pre-shipment run-up test at an Australian spindle service workshop, with written report and video, can be arranged at the buyer’s cost. Inspection in Melbourne by appointment. Terms: price net, FCA Melbourne (Incoterms 2020) in the original crates, payment in full before release by bank transfer or escrow. Export from Australia is subject to an export permit where required; the buyer provides end-user details. Freight, insurance, import duties and commissioning are excluded. Seller: Fleischmann’s Machines Pty Ltd, Melbourne, Australia. Hodpfx Apj Afb Stjdow

Condition: used, Year of construction: 2007, Cutting height at 90°: 170 mm Cutting length: 410 mm Horizontal miter range: 45°-90°-25° Vertical miter range: -60° to +60° Hedpfxo Af Hnge Apdsw Roller track/support table: no Saw blade diameter: 420 mm Rotational speed: 2800 rpm Motor power: 3 kW Motor brake: yes Feed brake: yes Clamping device: yes, pneumatic Cooling system: yes Dust extraction connection: 100 mm Machine length: 1.20 m Machine width: 0.70 m Machine height: 1.50 m Weight: 110 kg

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Hsdpfx Aexv Apwjpdjw Water Treatment: Used in dosing and chemical feed systems

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Hsdez Uxmbjpfx Apdsw Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification | Specification | Details | |---|---| Hjdpfoz U Acmox Apdsw | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. ### Machine hours and availability Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information.

Year of construction: 2007, condition: good (used), useful lenght 5000mm blades 500 mm Hedpfe Afn Risx Apdsw

Condition: used, Year of construction: 1996, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal mitre angle range: 45° - 90° - 25° Vertical mitre angle range: 60° - 90° - 30° Hjdpfx Aps Af Hnaodow Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Feed brake: yes / automatic Dust extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 2,960 mm, travel distance Y-axis: 4,800 mm, travel distance Z-axis: 510 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 120 mm, number of axes: 5, number of slots in tool magazine: 40, controller manufacturer: osai, actuation type: pneumatic, Equipment: CE marking, documentation/manual, The machine is in full working order. It is operational. Maintained accuracy is at the level of +/- 0.2 mm. The offer with details and photos is attached. Hodpfx Aps Aarpljdjw

Condition: used, Year of construction: 2010, Automatic multi-head capping machine, model AZW - type 08, for bottles with metal caps, equipped with a pneumatic cap sorting device, type SWK - 800. Effective output: 2000 - 12000 packages/hour. Total weight: 2000 kg. Electrical power: 2.7 kW. Air pressure: 7-8 bar. Frequency: 50 Hz. Technical documentation: available. Hedpoz S H Tdofx Apdsw Please check my other listings.

Condition: good (used), Year of construction: 2003, functionality: fully functional, overall weight: 225 kg, faceplate diameter: 400 mm, DIVIMEK Meca DCN-400 NC rotary table Previously used on a Hedelius machine with Siemens 840D control Hedpfx Apozn Iv Hsdsw Fully functional Includes ROD encoder Available for immediate delivery

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which Hsdpfxozt Ip Re Apdew can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.