CNC press brake, die bending machine, press brake, sheet metal bending machine, bending bench, die b
FASTI 904-125/30

Name: FASTI 904-125/30
Brand: FASTI
Price: 14000 EUR
Availability: InStock

Fixed price plus VAT

€14,000

Condition

Used

Location

Hessisch Lichtenau Germany

CNC press brake, die bending machine, press brake, sheet metal bending machine, bending bench, die b FASTI 904-125/30

Show map

Machine data

Machine type:: CNC press brake, die bending machine, press brake, sheet metal bending machine, bending bench, die b

Manufacturer:: FASTI

Model:: 904-125/30

Condition:: used

Price & Location

Fixed price plus VAT

€14,000

Location:: 37235 Hessisch Lichtenau

Call

Details about the offer

Listing ID:: A6629512

Reference number:: 58498

Update:: 06.03.2026

Description

CNC press brake FASTI type 904-125/30
serial no. 95-904-5775 year of construction 1995
Pressure capacity 125 ton.
Working length 3050 mm
Stroke approx. 335 mm
Stand projection 300 mm
Hsdpfx Aohmmfkegfeff
Clearance between the side uprights 2550 mm
Tool installation height max. 465 mm (opening width between the tool holders)
Table width 90 mm (the clamping system is mounted on the table)
Table height above floor 875 mm (910 mm with clamping system)
Backgauge X-axis 500 mm
Backgauge R-axis 115 mm
Backgauge Z-axis approx. 1950 mm
Lowering speed Y rapid traverse 90 mm/s
Lowering speed Y-operation 8.9 mm/s
Return stroke speed Y-retraction 75 mm/s
Oil filling approx. 160 liters
Motor power 18.5 kW
Mains connection 400 Volt, 50 Hz, 20 Amp.
- 7-axis CNC control DELEM type DA 58 with LCD screen
- 1 axis for back gauge - stop depth (X-axis)
- 2 axes for back gauge - fence height (finger R1 + finger R2)
- 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2)
- 2 axes for press beam with servo valves and measuring system Y1 and Y2
- Operation via electric foot switch and 2-hand control panel or 2-hand control panel only
- Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove
- Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm)
- FIESSLER safety light barrier, type AKAS
- 2 material support arms at the front, manually movable to the side and height-adjustable
- Electrical diagram, hydraulic diagram, user manual for control available
- Control cabinet on the machine
- without tools
Space requirement L x W x H 5000 x 2500 x 3050 mm
Transport dimensions L x W x H 5200 x 1900 x 2950 mm
Weight 8.5 tons.
Good condition

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2013

595 listings online

Call

Send inquiry

Message*

Name*

E-mail*

Telephone

Company name

Zip code & cityCountry

I am a dealer

Receive offers for similar machines

Note: Your inquiry will be forwarded to all sellers in this machine category. This allows you to receive a large number of offers.

Privacy statement

Telephone & Fax

+49 5602 ... show

Fax:

These listings may also fit your interest.

Listing

Ahaus

18,488 km

Hydr. pressbrake
FASTI904-125/30

Call

Condition: ready for operation (used), Year of construction: 1996, pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm Hfodpfx Agoxabk Iofjf From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

See details

Listing

Folding machine BIEGEMASTER XBEND 6.1,25 Doppelbieger up-and-down

Öhringen

18,567 km

Folding machine
BIEGEMASTERXBEND 6.1,25 Doppelbieger up-and-down

€189,000

EXW Fixed price plus VAT

Call

Condition: new, Year of construction: 2025, BIEGEMASTER double bender - Model XBend 6.1,25 Hfjdpfx Agovhc Dpjfjf Effective length: 6400 mm Bending capacity Steel 400 N/mm²: 1.25 mm V2A 600 N/mm²: 1.00 mm Aluminum 190 N/mm²: 2.00 mm Clamping capacity (closed seam): 0.5 mm steel Number of uprights: 4 pieces Driven upper bending joints: 4 pieces Driven bending joints bottom: 4 pieces Incl. touchscreen CNC control with automatic depth stop Incl. electric shears BIEGEMASTER Up- and Down- Bending machine - model XBend 6.1,25 Working length: 6400 mm Bending capacity steel 400 N/mm²: 1.25 mm stainless steel 600 N/mm²: 1.00 mm aluminum 190 N/mm²: 2.00 mm Hemming capacity (closed hem): 0.5 mm steel Stands + Tension Arms: 4 pcs. Driven linkage joints upper beam: 4 pcs. Driven linkage joints down beam: 4 pcs. Incl. touchscreen control and automatic back-gauge Incl. electric cutter

See details

Listing

Germany

18,260 km

Hydr. pressbrake
PromecamSTPC 200-40

Call

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Hedpfx Aou Icc Ajgfsff Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

See details

Listing

Babberich

18,541 km

Trimming Bearding machine
OMERAR4 / 12

Call

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Hjdpfxjkvnums Agfoff Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Jelah

18,113 km

PRESSBRAKES
BAYKALAPH 3100/10

Call

Listing

Altbach

18,603 km

Hydr. pressbrake
AMADAHFP 8025/L

Call

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Hfsdpfx Ajxyzzasgfof Number of working hours 24000 h length 3380 mm width 1800 mm height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

See details

Listing

Convection oven Wiesheu B4-E2 & B8-E2 Wiesheu B4-E2 B8-E2

Uzveće

17,982 km

Convection oven Wiesheu B4-E2 & B8-E2
WiesheuB4-E2 B8-E2

€1,500

Fixed price plus VAT

Call

Year of construction: 2012, condition: used, functionality: fully functional, Large quantities of models B4-E2 and B8-E2 available in stock (5 and 10 tray versions). Sold as a complete set with hood and cabinet with tray holders. Technical specifications (B4-E2): Voltage: 400V, Frequency: 50 Hz, Operating current: 13 A, Connected load: 9.2 kW, Water pressure: 150 – 250 kPa. Hjdjw Sm Tgspfx Agfsff Technical specifications (B8-E2): Voltage: 400V, Frequency: 50 Hz, Operating current: 26.6 A, Connected load: 18.4 kW, Water pressure: 150 – 250 kPa.

See details

Listing

Table boring machine TOS INTOS Zebrak FNG30 CNC

Jasło

17,749 km

Table boring machine
TOS INTOS ZebrakFNG30 CNC

Call

Listing

Punching and nibbling machine Trumpf TruPunch 3000 Large Format

Birmingham

18,725 km

Punching and nibbling machine
TrumpfTruPunch 3000 Large Format

Call

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 30,001,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Hsdpoxrnggjfx Agfsff Large throat 1600 Complete with multi tool capability Type S11 Video available upon request

See details

Listing

Contamine-sur-Arve

18,946 km

Horizontal machining center
OKKHM1600

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 40 [kW] - Spindle speeds : 12000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 2400/1650/1750 [mm] - Rapid traverses rates (X/Y/Z) : 42 [m/min] - Cutting feed rates (X/Y/Z) : 20 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 116 - Tool exchange time : 3.8 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 1600 x 1250 [mm] - Pallets number : 2 - Maximum weight upon pallet : 5000 [kg] - Distance table center / spindle nose (min./max.) : 100 - 1750 [mm] - Maximum workpiece diameter : 2500 [mm] - Maximum workpiece height : 1850 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 86 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9.485 x 6.155 [mm] - Machine height : 4.370 [mm] - Machine weight : 50000 [kg] MACHINE HOURS - Number of working hours : 15446 [h] EQUIPMENT - CNC : Fanuc 31i-model B5 Interface : Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle * with paper filtering unit * with cooling unit for coolant * With washing gun * With cabin washing - Chips conveyor - Spindle cooling unit - Tool probe Hodpfx Aew Ephbjgfeff - Workpiece probe : Renishaw RMP60 - Tool breakage detection : SOFT AC - Pallets number : 2 - Milling vice - Tool-holders

See details

Advertise here