Used Deburring for sale (397)

Year of construction: 2014, condition: ready for operation (used), A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible. Ihedpfxowfg Huo Ah Net

Condition: used, TECHNICAL DETAILS - Tank capacity : 4 x 8L * Speed : 23-132 [rpm] * Power : 0,25 [kW] Isdpfsw Hufujx Ah Njht - Drum diameter : 402.5 [mm] - Useful volume : 14 [l]

Condition: as good as new (ex-display), Year of construction: 2024, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Iedpfx Ajtr Avijh Noht Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: new, Timesavers Series 12 WW Ihedpfjwqf U Uox Ah Njt The machine is equipped with two belt grinding stations; with station 1 you can perform pre-grinding to remove high burrs and splatter, and with station 2 you can achieve a surface finish on the part. The transport speed of the belts is continuously adjustable. The table opening can be adjusted from 0.8 to 100 mm.

Condition: excellent (used), Year of construction: 2023, operating hours: 58 h, functionality: fully functional, machine/vehicle number: 6523036, working width: 650 mm, sheet thickness aluminum (max.): 150 mm, warranty duration: 12 months, grinding width: 650 mm, GECAM G65RRR with Wet Dust Extractor Surplus to requirements with only 58 hours working time Ihedpfswnukmox Ah Njt This machine can be re-configured to include deburring top-brushes or barrel brush in place of abrasive belt position 2 or 3 or both 2&3 (position 1 to remove vertical burrs) free of charge - enquire for more information 650mm processing width Wet Dust Extractor included with ducting and installation (installation free in Mainland UK only - for Europe please apply for installation price) Machine widely used in the automotive sector at manufacturing sites supplying BMW etc 3M 237AA Trizact Belts will achieve close to a mirror finish in a dry application on this machine on material over 1mm thick (P2000 FEPA abrasive finish) 6 months free abrasive belt supply from Finishing Aids and Tools Ltd for this machine (5 belts per position per month) For a full quotation, technical information or any questions you might have about this machine please contact us

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,060 mm, Multiple operations in one pass: deburring, rounding, oxide removal, metal slag removal ... Abrasive belt aggregate (K) TopBrush aggregate (4PTB) Ijdpjr Iydgofx Ah Njht Working width: 1060 mm Fast throughput: rounding at 4 m/min Operator-friendly operation via touch screen. Ex showroom machine!

Year of construction: 2016, condition: ready for operation (used), A specially built Eiberle reaming machine for pipe blanks is available. Stations: 4, cycle time: 3-5min, machine dimensions X/Y/Z: approx. 3900mm/1050mm/1900mm, weight: approx. 1500kg, control: Siemens, part counter: 40317, including a comprehensive tool package. Documentation available. On-site inspection is possible. Ijdpjv Sufyofx Ah Neht

Condition: new, Year of construction: 2025, Available from stock! Deburring and fine grinding machine with 3 workstations: Sanding belt - Brush station - Sanding belt Effective maximum working width: 1150 mm Standard workpiece thickness: 0.8 - 150 mm Ihodpfx Ahjpwh Tfo Njt Digital workpiece thickness display on the control panel, accuracy 0.1 mm Adjustable pressure rollers before and after the workstations Sanding belt insertion on the left Sanding belt centering via electronically controlled photocell, emergency stop in case of skew or belt breakage Infinitely adjustable conveyor feed speed Includes the following options: Machine base prepared for forklift loading Extraction collector in galvanized sheet metal for machines with 3 work stations plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces to the conveyor. With perforated feed table and carpet, as well as a powerful electric fan and sound-insulated exhaust according to CE standards, 5.5 kW 2x grit sets for electronic fine positioning of the contact rollers Adjustment and display (0.01 mm) on the control panel, standby position with pneumatic reset of the contact roller in the event of an emergency stop Frequency-controlled drive motors for sanding belt cutting speed, motor power per unit 11 kW Electronic adjustment of the brush unit HMI Vision - PLC control with visualization of the various machine settings via color touchscreen Storage capacity for up to 250 sanding programs

Condition: excellent (used), Year of construction: 2010, operating hours: 10 h, functionality: fully functional, machine/vehicle number: G2372-13, working width: 900 mm, working height: 1,190 mm, grinding belt length: 1,900 mm, grinding belt width: 930 mm, The machine has been used little and has only 10 operating hours! TECHNICAL DATA Area of application: Grinding, removing, and calibrating workpieces Working width: 900 mm Grinding belt dimensions: 930 × 1,900 mm Table opening: 1 – 125 mm Raised table opening: up to 250 mm Constant working height: 1,190 mm Speed and feed rate Speed of units: 11 and 22 m/s Frequency-controlled feed rate: 4 – 11 m/min MACHINE DETAILS Machine weight: 2,100 kg Grinding equipment Grinding belt units: 2 Motor: Two-speed motor Contact roller height adjustment: Handwheel for adjusting pressure or belt thickness Height adjustment display: Electronic digital display of the feed table height in mm Motor for contact roller unit: for Finish Sanding Voltage: 400 V Phases: 3 Frequency: 50 Hz Total Current: 62 A Power: 31.68 kW EQUIPMENT - 2 sanding belts - Rubber-coated steel rollers Iodpfxewa Ubce Ah Njht - Dust extraction

Condition: as good as new (ex-display), operating hours: 170 h,

Condition: new, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Isdpfxst D D Nzs Ah Neht Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Condition: as good as new (ex-display), functionality: fully functional, working width: 150 mm, Long sheet metal parts up to 150 mm wide, box sections, rectangular tubes and strips. Deburring, rounding and finish grinding. Ihedpfx Ahjr Iyg Ae Not Abrasive belt aggregate (K) TopBrush aggregate (2TB) Working width: 150 mm Ex showroom machine!

Year of construction: 2007, condition: ready for operation (used), A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available. Ihedpfx Ahotul N Ds Nst

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Ijdpfx Asucw Dzoh Njht

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1503, working width: 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 100 mm, workpiece length (max.): 4,000 mm, TECHNICAL DETAILS Working width: 1,000 mm Brushes: Fladder, grit 100 Maximum workpiece width: 800 mm Maximum workpiece height: 100 mm Maximum workpiece length: 4,000 mm Iodpfx Ajwa T Saoh Noht MACHINE DETAILS Voltage: 3 × 400 V Frequency: 50 Hz Current: 50 A Protection class: IP54 EQUIPMENT - Vacuum carpet - Vacuum pump - Additional brush set, grit 100

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Iedpfx Ahjucw Rbo Njht The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control Ijden Smbropfx Ah Njht - Metering pump - Magnetic valve - Control panel base - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Year of construction: 2021, condition: like new (used), As-new deburring and grinding machine Model: VKUE 150 Capacity: 150 liters Incl. grinding stone Year of manufacture: 2021 Ihsdpfx Ahsyabrao Nst Incl. water filtration system

Year of construction: 1971, condition: excellent (used), Brand: Sun Mountain Type: FTM Year of construction: 1971 Dimensions: approx. B 1,00 X 1,00 x H 1.50 m Ihsdped Sdg Sofx Ah Njt Weight: approx. 500 kg All information without guarantee. The machine is located in a very good condition. A demonstration of power is possible in our showroom at any time.

Condition: ready for operation (used), Year of construction: 2012, total height: 2,252 mm, overall weight: 9,300 kg, product length (max.): 5,000 mm, This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information. • X-axis speed: 90 m/min • Y-axis speed: 60 m/min • Simultaneous X/Y speed: 108 m/min • C-axis speed: 330 rpm • Max. punching force: 180 kN • Max. pressure foot force: 20 kN Ijdpfox Urcgjx Ah Neht • Max. workpiece weight: 160 kg • Max. sheet thickness: 6.4 mm • Max. sheet format: 2500 × 1250 mm (with repositioning) • Electrical connected load: 18 kVA • Fuse protection: 35 A • Pneumatic connection: 7–14 bar • Compressed air consumption: 8–10 Nm³/h • Tapping • Filling level inspection • Multibend • Multitool • Roller tools including cutting, pinching, folding, beading, knurling, deburring • Monitoring filling level • Hydraulic unit • Punch lubrication • Dimensions Machine Depth 6500 mm

Condition: new, Year of construction: 2023, functionality: fully functional, - 1 set of cleaning tools included with the machine - 3-phase power supply - 5-pin electrical plug - Includes transport and storage trolley Ihjdpfx Ahjwpulas Not The support bar cleaner from BMZ ensures a longer service life of the support bars through multiple cleaning. It cleans quickly and easily, without the need to remove the bars for cleaning. This saves valuable time! Cleaning a complete pallet in the standard size of 1500 x 3000 mm takes about 30 minutes. With laser cutting machines with a pallet changer, users can even clean the bars while cutting. The BMZ Pro Cleaner removes slag from even heavily used bars and automatically adjusts to different slag thicknesses up to 25 mm. It is also suitable for stubborn stainless steel slag. Regular cleaning increases process reliability and the quality of the produced parts.

Condition: excellent (used), For sale: professional pneumatic turbine GTV 1000 from the renowned brand Mannesmann Demag – original, fully functional, and in excellent condition. - Technical specifications: • Rotational speed: 100,000 rpm • Power supply: compressed air (approx. 6 bar) • Air consumption: approx. 318 l/min • Spindle diameter: 30 mm • Total length: approx. 120 mm • Weight: only 210 g • Collet: 3 mm Ihsdpfxow Rd I Es Ah Not • Oil-free version – clean operation without lubrication - Why choose this? • Extremely lightweight and compact – ideal for continuous operation • German quality – precise bearings, no vibration • Perfect for deburring, micro-milling, and robotics applications • Oil-free – cleaner operation and reduced material wear

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) Ihsdpon Smclofx Ah Net The pictures are for orientation only. The optional accessories are available additional charge.

Year of construction: 2015, condition: ready for operation (used), A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Ijdpjx Dm D Iofx Ah Neht

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal Iodpfx Ahjv T Truo Noht working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters