Brush deburring machine

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive Djdpfxszf Ircj Aaheuw The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel dividing/milling units: 1 Number of edge processing units: 4 Adhesive system: EVA hot melt adhesive The machine consists of the following processing units: Panel dividing/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Capping Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Overpressure Pressure with idler rollers Panel support guides Edge roller magazine Duedpfszf Id Sex Aahjw Adhesive pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8570

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Number of upper units: 4 With positioning via NC: yes Dujdpfozf Ibwjx Aahsw Lateral horizontal groups: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Control: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8649

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units, Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units, Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Duodozf Ibdopfx Aahew Milling spindles Number of milling spindles: 2 Milling spindles, Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles, Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Grooving units Number of grooving units: 2 Grooving units, Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Grooving units, Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode scanner (manufacturer: SICK) CE marking Protective grating Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, Year of construction: 2011, cutting height (max.): 430 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Dedpfx Aszf H Szoahjuw Max. cutting height: 430 mm EQUIPMENT CE marking 1 saw blade unit (tilting) The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at its destination. External Reference: 8580

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Dujdpfxszf H R Ro Aahow Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Number of milling units: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW EQUIPMENT Tilting spindle Number of milling heads: 1 The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8578 Dsdpezf H Nyofx Aahouw

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 3,800 mm, plate width: 2,200 mm, table length: 3,800 mm, table width: 2,200 mm, The pick-up deadlines stipulated in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Plate width max.: 2,200 mm Plate length max.: 3,800 mm Cutting depth main saw: 123 mm Number of grippers: 7 Duedszf H Nmspfx Aahsw Feed rate max.: 140 m/min MACHINE DETAILS Motor power main saw: 18.5 kW Motor power scoring unit: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding fence The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Working spindle length: 125 mm Max. tool diameter: 210 mm MACHINE DETAILS Motor power: 5 kW Djdpfxjzf H Iij Aahsuw EQUIPMENT Tilting spindle Milling unit: 1 Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8577

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! Dujdpfx Aaszf H Hrohow TECHNICAL DETAILS Saw unit 1 (tiltable) Motor power: 6 kW Saw unit 2 (tiltable) Motor power: 0.75 kW Working width max.: 3,000 mm Saw blade diameter: 300 mm MACHINE DETAILS Connection power: 7 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before pick-up and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8572