Used Tube Deburring Machine for sale (65,096)

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Giedpfx Ahspu R Ngsvop Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz Gjdpfehrkrwjx Ahvjip - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition

Condition: good (used), Year of construction: 2007, machine/vehicle number: 25392, Offer 25392 Technical specifications: - 2 workstations for internal and external machining Gsdoygk Ttspfx Ahvoip - Internal and external chamfering up to 4 mm - 2 working speeds: 100 + 200 rpm - 2 mounting spindles MK 3 - Drive: 400 V / 1.1 / 1.3 kW - Space requirement approx. W 500 x D 550 x H 700 mm - Weight approx. 70 kg - Workbench with 1 drawer and doors: W 1300 x D 840 x H 900 mm - Weight approx. 150 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Godpfsww Upzex Ahvoip Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Chuck maximum 30r/min Machine weight: 29t Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Optional: Weld detection, safety fence (light curtain), radiation-proof glass

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Gsdpsw A H T Ajfx Ahvjip Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: new, Year of construction: 2025, travel distance X-axis: 1,520 mm, travel distance Y-axis: 3,030 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 10,600 kg, total length: 10,100 mm, total width: 2,500 mm, total height: 4,500 mm, Max. Processing Size: 3000×1500 mm Max. Cutting Thickness： Can hold external diameter φ10-220mm Giodpfjv Awlqsx Ahvjp (Recommended: round tube φ40-200, square tube: □40-200), weight 20Kg/m Pipe Cutting Type: 6 meters Automatic Chuck Max.m Synthesis Speed: 150m/min Acceleration: 2.5 G

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Gedpfx Aewwz Dlehvjip Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR Gsdpfx Aotrd T Tehvsip 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit Gedpfeytpimsx Ahvsip - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the Gsdpfx Aheytfyzevjip cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Giedpeyupnxsfx Ahvop

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 5,265 h, machine/vehicle number: CV022100123, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 32 mm, overall weight: 275 kg, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, We offer this used BLM E-TURN32 CNC Tube Bending Machine, year of construction 2021. The machine is in good working condition and has been maintained in an industrial workshop. It is available for inspection and ready for immediate sale. Machine model: E-TURN32 Serial number: CV022100123 Year of manufacture: 2021 Supply voltage: 415 V Number of phases: 3 Supply frequency: 50 Hz Total installed power: 11.5 kVA Breaking capacity: 35 kA Control voltage 1: 415 VAC Control voltage 1 frequency: 50 Hz Control voltage 2: 230 VAC Control voltage 2 frequency: 50 Hz Control voltage 3: 24 VDC Control voltage 3 frequency: Hz Giedpsyuf A Eefx Ahvsp Weight: 275 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,408 h, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 52 mm, type of input current: three-phase, Equipment: documentation/manual, BLM ELECT52B CNC Tube Bending Machine. Electric Servo-Controlled CNC Tube Bender - ideal for high precision production. Key features include electric servo-controlled bending for high precision, heavy duty industrial construction, high efficiency and repeatability for production runs, multi-axis bending capacity, suitable for steel, stainless steel, and aluminium tubing. Machine is in good working condition and has been maintained in an industrial workshop. It is available for inspection and ready for immediate sale. Gijdpfx Aoyufp Sohvep

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 5300 kg Gsdsx D S A Njpfx Ahveip This TIMESAVERS 41serie 900 WRD N was manufactured in 2006. It features a 900 mm working width and can handle sanding heights up to 60 mm. The table adjusts from 0 to 80 mm, supporting various material sizes. Ideal for consistent deburring applications. Contact us for more information. Application Types Other Sheet Metal Machinery

Condition: new, Year of construction: 2025, ZGE60 - 60Lt Vibratory Sieving Machine Gisdpfxsw Hpfve Ahvsp * Changeable sieving system * 0.34 kW vibratory motor * Start/Stop thermal switch It is used to automatically separate abrasive/polishing stones and material from each other after the deburring and/or polishing process in vibratory machines that do not have a sieving system.

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. Gisdew Hb Tfjpfx Ahvsp - The dosing pump automatically adds the chemical to the tank * Working hours timer * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall.

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 1400 Measurements depth 3100 Measurements height 1800 Machine weight 2300 Gedpfjx D Sbxox Ahvjip Main Drive Spindle speed range 1415 Maximum sheet thickness 20 mm This LISSMAC SBM-M 1500 B2 deburring machine was manufactured in 2014. Ideal for efficient deburring applications, it ensures consistent quality and performance. Consider the opportunity to buy this LISSMAC SBM-M 1500 B2 deburring machine. Contact us for more information. Application Types Other Sheet Metal Machinery

Year of construction: 2014, condition: ready for operation (used), Additional Equipment Bundleloader: 6.5 meters Steploader: 6.5 meters Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back Gedpfx Ajx H A Rxjhvoip This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: like new (used), Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 150 mm, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This F1200 has only been used as a showroom model and is therefore almost new. The machine can be viewed at our showroom in Bergeijk. Discover the advanced F1200 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programs, ensuring high reproducibility of product quality and minimizing operator errors. Depending on the material to be processed, you can opt for a vacuum or magnetic support system. At the infeed side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating comb brushes that apply light pressure. The brushes provide uniform rounding of all edges and holes, both on the periphery and on the flat-ground product, resulting in the most optimal finish. Gisdpfsyt Npyox Ahvjp Additionally, the F1200 is also available in an XL version, which adds a fourth station. This station includes a second grinding unit that allows you to apply a line finish using a finer abrasive belt or finish with a scotch-brite belt. The F1200 offers options for automatic brush calibration, ensuring consistent accuracy, as well as full ERP control and flawless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. Gijdpfoyt Nm Eex Ahvjp At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. Gijdpoyt Nhvsfx Ahvjp The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, working width: 200 mm, sheet thickness (max.): 100 mm, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has only served as a showroom model and is therefore as good as new. You are always welcome to visit our showroom in Bergeijk for a viewing. 2023 Deburring and finishing machine F200 XL with vacuum support. Suitable for deburring, edge rounding, and/or grinding steel sheet parts up to 200 mm wide. Gjdpfxoyt I U Uj Ahveip Discover the advanced F200 XL finishing machine. All products ranging in size from a one-euro coin up to 200 mm wide can be processed on this powerful compact unit. Burrs and imperfections are removed at the infeed side by a grinding unit, resulting in a smooth, burr-free surface. This is followed by two oscillating combination brushes applying light pressure. The brushes ensure uniform edge rounding of all sides and holes, both around and within the flat-ground product, leading to optimal finishing quality. The F200 XL offers features such as automatic brush calibration to guarantee consistent precision, full ERP control, and seamless integration into automated production environments. In short, it is a finishing machine fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, year of manufacture 2023, optionally in combination with a WES3000 wet extraction unit and accompanying ductwork. Only available while stocks last. The machine is supplied with one year warranty excluding wear parts. Delivery ex-works Bergeijk. If required, we can also supply the machine including transport, installation, and operator training at your location. The machine can be viewed in our showroom in the Netherlands. Contact us and we will send you an attractive offer.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 80 h, functionality: fully functional, machine/vehicle number: 2623-43, working width: 1,100 mm, sheet thickness steel (max.): 100 mm, Edge Processing Machine Timesavers 32 WRBW - Demonstration machine, year of manufacture 2025 - Vacuum table for processing mixed materials - Automatic table cleaning - Deburring unit - Edge rounding unit Godpfxjytr Hnj Ahvjip - Finishing unit - Can be offered as a complete system with extraction - Installation and training by in-house service personnel

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 84659300, Machine consists of 3 working units: Giedpfx Ahsxn Ifujvjp 1st. XSV Brushes (12 rotating and oscillating brushes) 2nd XSV Brushes (12 rotating and oscillating brushes) 3rd Roller brush Feeding belt 1350 mm.

Condition: new, Year of construction: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of two oscillating rotor brushes, Ø 200 mm, one 1.5 kW motor per brush, variable speed drive 2nd unit, rotor group: Group of two oscillating rotor brushes, Ø 200 mm, one 1.5 kW motor per brush, variable speed drive Both units with oscillation: yes Height adjustment: handwheel Height indicator: mechanical counter Gedjv R U Ifopfx Ahvoip Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum carpet: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg