Used Beading for sale (256)

Year of construction: 2005, condition: excellent (used), CATALOGUE NUMBER 8004 TECHNICAL DATA Nwjdjy T Rf Dopfx Ad Soh - max. disc diameter: 350mm - disc bore diameter: 30mm - mitre cutting capability at 45° - max. cutting height: 100mm - max. workpiece width: 100mm - mitre cutting to the right/left - dust extraction port diameter: 2x80mm - motor: 3.7kW - machine dimensions (length/width/height): 1830x760x1610mm - weight: 308kg ADVANTAGES - suitable for cutting window frame profiles - used saw - very good condition Net price: 10900 PLN Net price: 2595 EUR, depending on an exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Njdpsxnlgcjfx Ad Sowh Storage location: Garbsen

Condition: good (used), Year of construction: 2001, Offer 26153 Technical data: - max. overhang 200 mm - center distance between rollers 50 mm Nsdpfx Adszg Dhie Sswh - max. material thickness at a tensile strength of 40 kg/mm² 1.25 mm - space requirement approx. W 300 x H 1150 x D 500 mm - weight approx. 25 kg - various beading rollers

Condition: as good as new (ex-display), Year of construction: 2026, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT Double Miter Saw Exenso DS350E - 3000 mm ----- For wooden glazing beads, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Includes 1 pc. center support. - Pneumatic clamping of the components. - Exenso DS3 positioning control with 15" touch panel display in a dustproof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Manual input of cutting data - Processing of data from a cutting list (data set according to specifications) - Processing of measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor, and software licenses. Item 1.2 Part number 942.5203 DS hydropneumatic feed unit Njdjyy A Ikspfx Ad Sjwh Item 1.3 Part number 723.0121 2 pcs. DS saw blade for wood Bevel/Angle/Flat tooth - Positive Item 1.4 Part number 942.5236 2 sets of DS combined workpiece clamping Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the Materials from above. (Free access to the worktable) Pneumatic horizontal clamp - Anti-rotation clamping cylinder with pressure piece. The clamps can be individually selected via the saw's control system. The clamping sequence can also be set via the control system. Includes safety pre-tensioning pressure. Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.5 Part number 942.5241 DS350 table support grooved (standard groove, special grooves according to customer specifications available on request!) Item 3.1 Part number 945.2007 Packaging DS350 (transport frame) ----- Total price in this configuration ex works - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the Offcuts for butt-jointed glazing beads instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Item 2.1 Item number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders, rotationally secured - 2 cylinder holders with clamping levers ----- OPTIONAL accessories, at extra cost upon request: ----- Item 4.3 Item number 942.5237 DS software "Extra Length" (subsequent steps must be confirmed) Sequence control incl. hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a timed sequence. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.1 Item number 944.1023 GMF 3000mm caliper complete set (1500 mm plus 1500 mm extension) Includes charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glazing beads. Functionality For use on doors and large window sashes, the GMF caliper can be mechanically extended safely and quickly to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic detection Accuracy of ±0.1 mm Resolutio...

Condition: ready for operation (used), Year of construction: 2018, Number of motors 1 Stück 0 2500 mm Control nein Hecht ES 350 single-sided glazing bead saw ----- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm Njdpfxevpr N Rj Ad Sswh 1.5 m touch stop 1.5 m support with support 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 1998, total width: 1,400 mm, total length: 3,400 mm, Colour: Green Weight: 250 kg Dimensions (LxBxH): 340 x 140 x 150 cm - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: - Number of saw units [pcs.]: 2 - Max. cutting width [mm]: 55 - Max. cutting height [mm]: 110 - Arbor saw blade diameter [mm]: 30 - Min. saw blade diameter [mm]: 215 - Max. saw blade diameter [mm]: 220 - Number of pneumatic clamps: 2 - Options: Digital readout, Tiltable saw unit - Min. tilt adjustable [°]: 0 - Max. tilt adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 4 - Fuse [A]: 16 - Power [kW]: 2.4 - Transport dimensions: 3400mm x 1400mm x 1500mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nedpfezcnpqox Ad Sjwh Yorick Diebels

Condition: new, Rollmak Motorized Beading Machine BM 250 Includes 3 tool sets Technical specifications Tool diameter: Ø95 Shaft length: 260 mm Nsdpfjum Tzxox Ad Sowh Bending capacity: 2.5 mm Rotation speed: 3.5 m/min Motor: 1.1 kW Dimensions L-W-H: 1550x550x1200 mm Weight: 295 kg CE marking

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 01073210005, For sale: a Yilmaz CK 412 strip saw for cutting window frame strips, complete with a Yilmaz SKN 301 electronic measuring device. The measuring device has a length of 3 meters. The machine is equipped with a measuring strip for wireless data transmission to the measuring device. The measuring device automatically adjusts to the next dimension after each cut. Njdpfx Adozdruxj Sjwh The set also includes a 1.5-meter long feed conveyor. The machine is in full working order and has been recently serviced.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: 400 6071 LA398, In very good condition. Nedpfozdp H Esx Ad Sswh

Condition: ready for operation (used), A motorized sheet metal forming machine is offered, drive: electric, control: foot pedal, control: foot switch. Equipped with an electric foot button. Weight: approx. 150kg, overall dimensions X/Y/Z: approx. 500mm/1000mm/1200mm. Inspection possible by arrangement. Njdpfx Adezcfhwj Sswh

Condition: excellent (used), Kramer SBMM 70 Kramer SBMM 70 beading machine edging machine, slitting machine, roller Nwjdpfx Adera Nw Is Soh Manufacturer: Kramer type: SBMM 70 max. plate thickness: 1.75 Cylinder center distance: 70 mm Maximum working depth: 280 mm Drive power: 1.1 kW Operating speed: 4.5/9 meters/minute constant. Operating speed with stepless drive: 2.5-21 mm shaft diameter Weight: 190 kg ​

Condition: new, Year of construction: 2024, - Capacity 2.5 mm - Axle length 250 mm Nodpfx Ajur Hf Ujd Sswh - Ejection 160 mm - Roller diameter 96 mm - Foot control - Brake motor - With 4 roller sets - Emergency stop - Documentation - 400V

Condition: new, Sheet thickness max.*: 2.5 mm Working speed: 5 1/min shaft length: 250 mm shaft diameter: 65 mm motor power: 1,5 kW Connection: 400 V Weight, approx.: 400 kg * Material strength 400 N/mm2 without stop Features: - Extended application range due to 8 different pairs of rollers available as an option - Upper shaft with quick adjustment and stable clamping - Axially movable stop plate for high repeat accuracy - Operation via foot pedal, thus both hands free to hold the workpiece - Powerful drive motor for processing sheets up to 2.5 mm steel plate - High accuracy due to precision bearing mounted shafts - For economical production of a wide range of beading types Scope of delivery: - Beading rollers -Mobile foot pedal control panel - workpiece stop Nwedpfx Adopxl U To Ssh - roller wrench

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Nwjdpovk D Tdofx Ad Soh Sheet thickness max. 1.75 mm.

Condition: new, Number of motors , Stück 0 , mm Control , 0 cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Njdpfxsy T R Sqj Ad Sewh Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Type SME 200/11 year of construction 2006 throat 1100 mm connected load 5,5KW max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Table-top version of sheet guide device Total weight 6700 kg The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). Nwsdpfx Ash Hgdrjd Seh No Sales to private persons

Condition: excellent (used), Perlmühle Molteni MS.15 Previously used in a protected application Grinding container, 15 liters Additional grinding container Double-walled design Nwsdeiu H Ucopfx Ad Ssh Power: 17.5 kW In very good, ready-to-use condition, directly from production!!!

Condition: excellent (used), Perlmühle COMEC M 8 Stainless steel Double-walled Container volume: 8 liters In very good, ready-to-use condition, directly from production!!! Nodjh Rakhepfx Ad Sowh

Condition: excellent (used), Perlmühle Drais PM 1 RL-V Previously a protected model Grinding container 1.3 l Stirring motor power 2.5 kW with feed pump Overhauled in 2005 Nsdok D Ac Espfx Ad Sjwh In very good condition, directly from production!!!

Condition: excellent (used), Perlmühle Vollrath VMSM 2/8 B Nwedpeh Svr Sjfx Ad Ssh Ex-protected design Double chamber Grinding pot 2 x 8 l Double jacket Power 18.5 kW In very good, ready-to-use condition, directly from production!!!

Condition: excellent (used), Perlmühle Drais PM 25 RL-V Previously used, protected design Grinding container, 26 liters Stirring motor power: 24 kW with feed pump Nsdpfx Aok D Agtjd Sowh In very good condition, directly from production!!!

Condition: used, Pneumatic Glazing Bead Saw / Mitre Saw – Elumatec GLS 192/06 – Year 2005 with electronic positioning system for cut length management. Equipped with a protected cutting unit featuring integrated safety systems, electronic control, and a robust structure designed for intensive industrial use. The machine ensures precise machining operations with high productivity and excellent cutting quality. Main Features: Brand: Elumatec Model: GLS 192/06 Application: cutting PVC and aluminum profiles Heavy-duty industrial frame with high rigidity Cutting area protection system Ergonomic and user-friendly controls Suitable for window and door manufacturing Used machine in good working condition Technical Specifications: Blade diameter: 200 mm, 98 mm (45° mitre cut) Blade speed: 2,800 rpm Cutting unit feed: pneumatic Output power: 900 W Power supply: 3/PEN 400 V Frequency: 50 Hz Current: 4.8 A Installed power: 1.8 kW Speed: 2800 rpm Operating pressure: 7 bar Nwedpfx Adey Uw Eaj Soh Dimensions: approx. 5100 x 1050 x 1180 mm Weight: 140 kg Ideal for: Window and door production PVC/aluminum frame workshops Precision industrial machining operations

Condition: good (used), Beading machine, flanging machine, seam closing machine, motorized beading machine Nsdeb A Ncrepfx Ad Sewh -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg

Condition: good (used), Beading hook Length 350 mm Beading horn width approx. 40 mm Round grain diameter 22 mm Total height 220 mm Njdpfowlpz Iox Ad Sswh Square 45 mm Weight 4.5 kg

Condition: used, Year of construction: 2015, Beading machine Nedowrywgepfx Ad Sjwh DS-Lifting - H-9000