Used Cross Milling Table for sale (46,095)

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Chsdethuzpjpfx Ab Tsf Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Year of construction: 1978, spindle diameter 105 mm x-travel 1250 mm y-travel 1000 mm z-travel 600 mm Chedpfx Abot Hwtxe Tof table length 1100 mm table width 900 mm tool adaptor 50 ISO / MK total power requirement kW weight of the machine ca. t CNC Table Borer, Reconditioned 2002, BOSCH CC 300

Condition: ready for operation (used), 1 used CNC bed milling machine with Heidenhain control system. Rotary table included. Further technical data will be added. Cedpfx Abjwxxzqe Tehf

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Cedpfxowt Abws Ab Tshf Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: excellent (used), SCM internships in excellent condition Codpst Hkq Rjfx Ab Tjhf

Condition: like new (used), Year of construction: 2017, operating hours: 784 h, functionality: fully functional, Controller Fanuc 31i Model B Spindel diameter 110 mm Table size 1250 x 1500 mm T slots in the table 22 mm / H8 x 150 mm x 7 Max. table load 5000 kgs Distance between the spindle nase and table surface 0 - 1600 mm (universal head) Distance between the spindle center and table surface 105 - 2250 mm (universal head) X travel 2200 mm Y travel 1600 mm Z travel 1600 mm W travel 550 mm (spindle feedrate) B axis 0,001 degree (stepless adjustable) Spindle speed 35 - 3000 rpm Tool holder type ISO50 . ATC magazin 60-fold Rapid speed on X / Y / Z / W axes 12 / 12 / 12 / 6 m/min. Feedrate on X / Y / Z / W Achsen 10 / 10 / 10 / 6 m/min. Spindle power 18,5/15 kW Torque 863 / 740 Nm Power required 400V, 50 Hz, 50 kVA Chjdpfettgzcex Ab Tof Weight 21500 kgs Dimensions L x W x H = 7750 x 4715 x 3700 mm Accessories, features - Coolant unit - ATC magazin - Coolant through spindle 20 bar - Chip conveyor - RENISHAW OMP60 Infra zero point presetter - Universal milling head - Clamping angles 2 pcs - Separated electrical cabinet - Manuals The machine can be found in almost new condition. It was barely used. Ready to buy immediately. Still under power in Hungary. The dismantling and loading are the buyer's cost.but we can help to customers in this job by ourself.

Condition: used, Univ. swivel-tilt-rotary table Add-on table for Univ. tool milling machine table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Swiveling +/-45 - 4x T-slot Weight approx. 120 kg Chodpfxogp T D No Ab Tsf

Condition: good (used), Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm -Individual components: see photos Chsdoqgi Ihepfx Ab Tjf -Dimensions: 750/550/H445 mm -Weight: 35 kg

Condition: used, A rigid table milling machine or rigid milling machine Bäuerle type SFM for profiling and milling wood, equipped with a table extension and a feed device. Cjdpfx Aov Hf Uueb Tshf Spindle ø: 30 clamping length: about 120 mm speeds (milling machine): 3,000/5,000/6,000/10,000 rpm Direction of rotation: Left and Right

Condition: used, Table router MARTIN -used- finely adjustable milling fence, right/left rotation ----- Technical data ----- Table size: 1,000x930 mm, Worktable height: 860 mm, Spindle diameter: 40 mm, Useful length of milling spindle: 160 mm, max. cutter diameter: 255 mm, max. retractable cutter diameter: 255 mm, height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Cedpfxou R Td Ns Ab Tohf Motor: 4.7/5.7 kW, Extraction nozzle Ø: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mm

Condition: new, Optimum OPTIdrill DH 40CT column gear drilling machine with cross table 3034349 The versatile machines for milling and drilling. TECHNICAL DATA General information Tightening rod M 16 Dimensions and weights Column diameter 115mm Length (product) approx. 1060mm Width/depth (product) approx. 745mm Height (product) approx. 2090mm Weight (net) approx. 370kg Drilling capacity Drilling capacity steel (S235JR) 32mm Continuous drilling capacity steel (S235JR) 25mm Tapping capacity steel (S235JR) M 16 End mill size max. 25mm Cutter head size max. 76mm Drilling table Drilling table work surface length 730mm Drilling table work surface width 210mm Drilling table T-slot size 14mm Drilling table T-slots quantity 3 Drilling table T-slot spacing 63mm Load capacity drilling table 50kg Distance spindle - drilling table max.600mm Speed range Speed range 95 - 3200min¯¹ Number of speed ranges 2 x 6 steps Electrical data Drive motor power 1.1 / 1.5kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max.1180mm Machine foot working surface length 495mm Machine foot working surface width 375mm Machine foot T-slot size 14mm Machine foot T-slots quantity 2 Machine foot T-slot distance 230mm Csdpot N Rkpefx Ab Tohf Machine foot length 670mm Machine foot width 470mm Spindle Quill stroke 120mm quill diameter 75mm Spindle holder MK 4 throat 280mm Drill head rotation 360 Drill head inclination 45° Manual quill feed Drill head height adjustment 260mm Travel distance Manual X-axis travel 480mm Manual Y-axis travel 180mm Manual Z-axis travel 560mm SCOPE OF DELIVERY Sprocket chuck 1 - 13 mm / B 16 T-nuts Adapter MK 4-MK 3 Arbor MK 4 / B16 Operating tool

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 407, empty load weight: 15,500 kg, total length: 7,357 mm, total width: 3,400 mm, total height: 3,107 mm, Type: LFU 3000 5-assig simultaan frezen Orthogonale CNC-indexeerfreeskop koeling door spindel 30-positie gereedschapswisselaar Keeldiepte: 1500 mm Longitudinal travel X-axe: 2700 mm Cross travel Y-axe: 1200 mm Travel Z-axe: 1000 mm Dimensions clamping space- table: 3000 x 1000 mm Power on spindle: 26 kW Admission in millinghead (ISO): ISO 50 Max speedrange: 1800 rpm Cjdpfx Abev Tanvs Tohf Power needed (KVA): 68 kVa Cooling system: yes

Condition: used, Cross table with stepper motor drive Precision positioning systems UHL Cross table UHL type KT5-NSOC Csdpfx Abeflrtpo Tshf Series no. 0008002 Table size: 145 x 145 mm Table opening: 75 x 75 mm Height: 51 mm Travel: 50 mm per axis Straightness / flatness: 5 μm - Drive per axis via 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 265 x 220 x 51 mm Weight: 3.5 kg Very good condition

Condition: used, clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table swiveling -Axles: adjustable with hand crank, see photos Chsdeu Tlglspfx Ab Tsf -Dimensions total: 530/350/H450 mm -Weight: 56 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description of 185x100 mm Cross Table Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Chedsvu Tqyjpfx Ab Tef Screw guard protects the feed mechanism from chips An additional benefit of the table is a pitch, which simplifies telling the X,Y axes position of the table 2.5mm/0.02mm vernier

Condition: used, BÄUERLE SFM spindle moulder - used - Planed cast iron table, Finely adjustable milling stop, Right/left rotation Chodpfx Aswmctysb Tjf ----- Technical specifications ----- Table size: 1100 x 920 mm, Work table height: 830 mm, Spindle diameter: 30 mm, Speeds: 2,800, 4,500, 5,600, 6,000, 9,000, and 12,000 rpm.

Condition: used, Cross table with mounted rotary table and stepper motor drive Rotary table, dividing attachment Precision positioning systems UHL Cross table UHL type KT5-NSOC Serial no.: 0008002 Table size: 145 x 145 mm Construction height: 62 mm Chodpjw E Nw Asfx Ab Tef Travel: 50 mm per axis Straightness/flatness: 5 μm - Drive per axis by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 200 x 200 x 62 mm Very good condition Rotary table UHL type B80 DT as dividing head Serial no.: 00080002 Rotary table: Ø 74 mm Construction height: 40 mm - Drive by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (rotary table) L x W x H: 92 x 80 x 40 mm Dimensions with mounted rotary table L x W x H: 200 x 200 x 102 mm Weight: approx. 3 kg Very good condition

Condition: used, Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm Chedpfx Aehtn Sbob Tof -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale Cedpfx Absd E A I Ne Tjhf - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm Chjdpfsi I Hdcsx Ab Tef -Weight: 74kg

Condition: good (used), Year of construction: 1991, spindle moulder, spindle moulder, wood milling machine -Manufacturer: SCM, table milling machine type T 110 A with table extension -Drive: 4 kW -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/8,000/10,000 rpm -Table extension: with stops on both sides see photos -Dimensions total: 3600/910/H1610 mm / machine 2615/750/H1320 mm -Total weight: 550 kg Chedpfxjwhbths Ab Tjf

Condition: used, Cross table, cross slide table, clamping table, clamping plate with T-slots, clamping angle -Cross table for lid type: KF12 -Table surface: 400 x 400 mm Chsdpob A Ix Eofx Ab Tef -Travel: x 50 mm/y 65 mm -Weight: 60 kg

Condition: used, Table milling machine, table milling machine Csdpecmh H Refx Ab Tshf -Spindle: comes from a Lubimez bench milling machine -Table milling machine: with rigid spindle -Dimensions: 800/800/H400 mm -Weight: 95 kg

Year of construction: 1985, condition: used, Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg Chsdpfx Aocnpxnsb Tsf

Condition: used, Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm Chodpfjcl Svvjx Ab Tef -Weight: 560 kg