Robot cross table

Berger Lahr x/y/z 670/360/1260 mm

Condition: used, ABB Type: Robot IRB 340 / Controller IRC5 M2004 ABB Robot FlexPicker Delta4 IRB 340 with controller IRC5 M2004 Payload: 1 kg Positional accuracy: 0.1 mm Angular repeatability: 0.4 Working range (diameter): 1,130 mm Height: 250 mm Weight approx.: 300 kg Pedpsqzw Ttsfx Ag Regu Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: as good as new (ex-display), Year of construction: 2024, Capacity: 5.000 kN Specification: Threshold setting: Reading begins at 1% of capacity (50 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect Pgsdpfx Agjfpwk Rs Rju on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (7.500 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 230 L x 190 W mm, height app. 180mm Height sets to 7.0000" +/- 0.0005" Weight: app. 32 kg inckuding carrying box with analog output

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total height: 8,025 mm, total width: 3,405 mm, total length: 2,810 mm, load capacity per storage section: 250 kg, construction height: 50 mm, warranty duration: 12 months, Equipment: safety light barrier, Table preselection control with article management. Device comes from a lift system. Side shaft claddings have been retrofitted. No side access door. 4 units available. Machine height is adjustable. Storage lift including delivery, installation, DGUV acceptance & warranty. Pgjdpow S Udyjfx Ag Rou

Condition: used, Year of construction: 1996, turning diameter 400 mm turning length 915 mm control NUM Type 1062 T total power requirement 12,5 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Pgsdst Hw Szopfx Ag Rou

Condition: used, Year of construction: 2009, BAZ cover for Maho DMC63V, year of manufacture 2009 (includes new milling spindle + Y-axis spindle) Heidenhain control Pgodpfxjw D Sp Ej Ag Rsu BAZ DMC 63 V, year of manufacture 2001

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation It is always possible for you to inspect the desired system in our production/demonstration hall. Psdpfxofu Iwme Ag Rogu Please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Manufacturer: Faro Type: Prime Year of manufacture: 2013 (Certification date: 23.10.2023) Version: 28.1 Type: Measuring arm 6 axes, 1.8 m Scope of delivery: Arm, base plate, standard probe kit (3 mm, 6 mm), battery, cable, dust cover, transport case. Software: CAM2 Measure 10, full version Measurement software for FaroArm, ScanArm, and Faro Laser Tracker Podpjzlg Ucofx Ag Regu Further information, see images. Condition: Very good, used, fully functional.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,000 mm, total height: 2,000 mm, total length: 1,620 mm, working width: 1,100 mm, overall weight: 1,000 kg, power: 12 kW (16.32 HP), input current: 20 A, sheet thickness (max.): 120 mm, sheet thickness steel (max.): 120 mm, Deburring up to 1100mm. Deburring of metal-cut parts up to 1100mm wide. DM1100 Z finishes and deburrs light metal sheets cut by laser, punching or shearing. This machine has a single wide belt station that can be used to deburr parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing, where it can be used with both standard sandpaper and non-woven/scotch belts. DM1100 Z Working capacity (mm) 1100x120 No. of belt stations (Z) 1 Sanding belt, dimensions (mm) 1100x1850 Sanding drum specifications Ø186mm Pgedpfxstzfpkj Ag Reu Sanding belt speed (m/s) 8-22 Feed speed (m/min) 1.5-10 Sanding belt motor per head (kW) 11 Feed motor (kW) 0.18 Total power (kW) 12 Power consumption (A) 20 Rod suction connection per head (Ø mm) (1x) 152 Dimensions (mm) 1620x2000x2000 Weight (kg) 1000

Condition: used, Year of construction: 1994, Frame press, Schafberger & Sprödhuber Pgsdpoilurnefx Ag Rou Type Super 4 kW 3 m x 6 m

Condition: new, Year of construction: 2023, FANUC M-10iD/12 Pgodpfx Agoxvplls Rou Year of manufacture: 12/2023 System: R-30iB Plus with TECTORY enclosure, FUCKS KKF200 extraction unit and various spare parts