Used Cross Milling Table for sale (53,925)

Condition: used, Offered for sale: "Jely" under-table crosscut saw. Year of manufacture approx. 1996. The under-table crosscut saw operated flawlessly until the end of production. Primarily, round timber in 65 mm and 52 mm was crosscut without issue. The saw was positioned in line with an edging circular saw, enabling efficient crosscutting and edging operations. The controls are designed for two-handed operation. In the photos, the protective covers have been removed for better visibility inside the machine. The machine is in used condition, appropriate for its age. Iedpjw Nyxkefx Afistn Further details available upon request.

Condition: used, Year of manufacture: 1994 Working height: 850 mm Saw blade diameter: 500 mm Cutting speed: 76 m/sec Saw blade flange diameter: 130 mm Saw motor power: 5.5 kW Saw motor speed: 2900 rpm Iedpfx Afowudifeietn Saw motor insulation class: B Weight approx. 350 kg All technical data and information as per brochure

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, spindle speed (max.): 7,000 rpm, workpiece weight (max.): 15,000 kg, Equipment: rotational speed infinitely variable, FPT Moving Column Milling Machine mod. RONIN CNC Control Heidenhain 530 X axis 8,000 mm Y axis 1,500 mm Z axis (vertical) 2,500 mm Rapid traverse 35,000 mm/min Feed rates 15,000 mm/min Automatic bi-rotational milling head (continuous) – TUPC Spindle taper ISO 50 Max spindle speed 7,000 rpm No. 1 ROTOTRASLATE TRT TABLE Hydrostatic Dimensions 2,000 x 2,000 mm Travelling V axis: 1,500 mm Max load capacity: 15 tons No. 1 ROTARY TABLE Dimensions 1,500 x 1,500 mm Max load capacity: 15 tons Tool changer with 80 positions Total installed power 88.8 kW Equipped with: - Internal high-pressure through spindle: 20 bar - External high-pressure coolant: 4 bar - Chip conveyor Itodpfx Aowzxwqsfion - Remote CNC Heidenhain wireless control pendant - Laser probe and software for tool integrity check, tool length & radius measurement - Workpiece measurement and alignment probe USED MACHINE

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine - Ijdpfx Aou R Sycjfijtn

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, - Used for lock handle, hinge, espagnolette slots and grooving in desired size on aluminum and plastic profiles - Copy assembly suitable for your operation - Various grooving features independent of the copy assembly with the help of the stop Itodpfxorcm D Do Afijn OPTIONS - Lower cabinet system - Pneumatic system

Condition: used, functionality: unexamined, saw blade diameter: 500 mm, cutting height (max.): 160 mm, cutting width (max.): 430 mm, rotational speed (max.): 2,800 rpm, Two-hand control Roller table Automatic safety and hold-down device Iodpov Tcmuefx Afistn

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Ijdpou R Sypsfx Afiotn Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic Itodpefvqmxsfx Afijn

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm Itedpfjfv Hphjx Afion ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: excellent (used), Professional TITE-LOCK MILLING CHUCK with SK40 – CT20A mounting – 90 mm. The high-quality quick-clamping TITE-LOCK system ensures exceptional clamping force and working precision, ideal for milling, drilling, and precision machining. . Type: TITE-LOCK MILLING CHUCK . Mounting: SK40 – CT20A . Length: 90 mm . Applications: milling, drilling, CNC machining . Condition: used, fully operational, very good technical condition ✅ Robust and precise industrial tool for professional use on milling machines and machining centers. Excellent rigidity and high tool holding force. Iedpoxk T H Asfx Afistn

Year of construction: 2025, condition: used, New: No Ijdoxmhr Eepfx Afistn Empty weight: 500 kg Auction item. Broom in working condition. Sold as seen in photos.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Itodpfeu Tg I Dsx Afijn Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Outfeed table before resaw IDL000793 Itodpfx Afjul Rgveijn

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Isdpfx Ajd Ecncofietn Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Technical data: Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Equipment: – elements for fixing the cardboard Iodpfx Afsvkt N Ueistn – module for wrapping the cover

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Iodpfx Afjvuk Uisijtn

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Iodpfstpgxisx Afietn Height: 80 cm (height is adjustable) Diamter: 120 cm

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery Itodjh S Uhfepfx Afion PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm Itodpfxetddw Ae Afion - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Includes the following components, among others. - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos - Bucket weigher - Dosing screws Itedpfx Aoq Hr Rzefisn - Elevators - bunkers - Switchgear cabinets

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10 500 mm Uitgebreid armbereik van de robot (links en rechts): 3045 mm maximale werkstuklengte als het een profiel is: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10 500 x 3045 mm max. werkstukhoogte: 3500 mm Gereedschapswisselaar met 13 posities: - 12 aangedreven gereedschappen Itedpfx Ajv Sfk Hsfisn - 1 meetsonde Freeskop: -SK40 - 12 kW op spindel / 16 000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit aanpassen naar één werkgebied (voor een groot werkstuk) of opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: used, Roller conveyor with chain cross conveyor Can be used after resaw. - Electric motor: 1,1 kW Iedpfxoi Sdk So Afistn - Electric motor: 0,75 kW - Electric motor: 1,1 kW

Year of construction: 2023, condition: new, machine/vehicle number: 001, The Stainless Steel Molasses Mixer is an advanced machine designed for homogeneous mixing of raw materials with liquids such as molasses and steam. With its two shafts and high-quality stainless steel construction, this machine offers durability and efficiency in one. The strength of this molasses mixer lies in its ability to deliver a continuous mixing process with an impressive capacity of 60 tons per hour. This makes it ideal for industrial applications where consistent and even mixing of materials is crucial to the production process. Itsdpfx Afork Ipnsisn The machine's stainless steel construction ensures not only durability but also hygiene, making it suitable for applications in the food industry and other sectors where strict standards apply to materials in contact with products. Whether in the production of animal feed, chemical mixtures or other industrial processes, the stainless steel molasses mixer guarantees reliability and consistency in the mixing process, making it a valuable asset for modern production environments. Power:2 x 22 kW Speed:1500 rpm 2. volume: 600 liters 3. capacity:60 Tons/Hour 4. weight: 2500 kg

Year of construction: 1988, condition: used, Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments CARVING SIDED WITH MECHICZNYM FEED, TABLE Header 400 mm. The machine is equipped Pile GRADING AND FACE CUTTER control of the desktop, has a smooth ADJUSTMENTS FEED POSSIBILITY OF WORK CYCLE MANUAL AND AUTOMATIC MAIN ENGINE 5,5 kW MOTOR SAW GRADING 2.2 kW FACE AND FEED ENGINE 1.2 kW clamps on the table automatically tighten detail pneumatically. Fixing detail and The machine automatically releasing a very good stem diameter 35 mm HEIGHT 180 mm depth MILLING CUTTING MATERIAL SAW Ijdpfxscrl Rlj Afiotn SAW CUTTING 140 mm.POSSIBILITY MILLING THE TABLE ANGLE

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner Ijdpsu Smq Ssfx Afietn - log infeed conveyor