Used Croissant Machine for sale (83,775)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X66609, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum/maximum mold height: 300 - 900 mm Maximum opening stroke: 1,840 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection unit Screw diameter: 84 mm Shot volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s Bedpfxex A Awzs Ab Tedk MACHINE DETAILS Control system: CDS700 Clamping unit weight: 25,400 kg Injection unit weight: 7,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pull (1 pcs.)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS X-axis travel: 1,600 mm Y-axis travel: 800 mm Bdedpfxsx Ap S Eo Ab Tok Z-axis travel: 710 mm Maximum spindle speed: 6,000 rpm Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Spindle taper: ISO 50 MACHINE DETAILS Control unit: Heidenhain iTNC 530 Note: The machine can be inspected under power until week 50.

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Bjdpfxsx Af S Us Ab Todk Automatic Operation Hours: 30,517 h FTP ATR-25 Q MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Bdedpfsx A Hagox Ab Tok Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bdedpfx Aox A Efhob Tjk Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Performance: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage EQUIPMENT Take-out unit Conveyor belt LT/h 1825 TPS robot TRT-M4-72-E

Condition: ready for operation (used), Year of construction: 2004, operating hours: 47,870 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, table load: 10,000 kg, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 2,100 mm Z-axis travel: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Table load capacity: 10,000 kg Spindle taper: ISO 50 Standard spindle speed: 6,000 rpm Bjdpfxex Agh Re Ab Tjdk Spindle motor (continuous / 30 min): approx. 22/26 kW Tool changer capacity: 32 tools Max. tool diameter: Ø 127 mm / Ø 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Rapid traverse X-axis: up to 20,000 mm/min Rapid traverse Y-axis: 15,000 mm/min Rapid traverse Z-axis: 15,000 mm/min Cutting feed: approx. 1 – 10,000 mm/min MACHINE DETAILS Program runtime hours: 47,870 h EQUIPMENT Extension of equipment to automatic head changer with angular milling head

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: X88628, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, The cylinder, screw, and screw tip of the injection system were replaced a year ago! TECHNICAL DETAILS Clamping Unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum mold height: 400 mm Maximum mold height: 1,125 mm Maximum opening stroke: 2,065 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 29,300 kg Weight of injection unit: 7,700 kg Bodpfxox A Avqo Ab Tjdk EQUIPMENT Pneumatic valves (4 pcs) Cores: (1 pc)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit Bdjdpfx Absxzfwbo Tek - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm Bjdpfx Ajxywupsb Tsdk FEATURES Fume extraction system

Condition: like new (used), Year of construction: 2005, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: will advise enquirer, pressure: 200 bar, this machine has very little use and is as new condition Bdedpfx Aswgkhrob Tsk

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD Bsdpev Dpy Nsfx Ab Todk

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR Bjdjtrd T Tepfx Ab Tedk 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X81559, clamping force: 9,000 kN, screw diameter: 115 mm, injection pressure: 1,740 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H x W): 1,570 x 1,560 mm Tie bar spacing (H x W): 1,010 x 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. opening stroke: 2,290 mm Centerring diameter: 250 mm Ejector stroke: 300 mm Bdjdpfx Abjx A At Ns Tok Injection Unit Screw diameter: 115 mm Shot volume: 6,232 cm³ Shot weight (PS): 5,733 g Injection pressure: 1,740 bar Max. injection speed: 300 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 44,500 kg Weight of injection unit: 20,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pulls (1 pc.)

Year of construction: 2017, condition: ready for operation (used), General Data Bedjx Aw Aljpfx Ab Todk Measurements width 2280 Measurements depth 3350 mm Measurements height 2500 mm Machine weight 7200 kg Main Drive Number of axis 6 Movement X-Axis Movement 510 mm Y-Axis Movement 970 mm Z-Axis Movement 420 mm V-Axis Movement 210’ A-Axis Movement HSK 63 swivel angle 360 degree B-Axis Movement +/- 20 degree This 6-axis VOLLMER QXD 250 grinding machine was manufactured in 2017. It features a robust 3 Phase 380Volts, 50hz, 8.7KVA power supply and a substantial coolant tank capacity of 310 liters. With a machine weight of 7,200kg and comprehensive axis movement, including a 360-degree swivel angle on the A-Axis and +/-20 degrees on the B-Axis, consider the opportunity to buy this VOLLMER QXD 250 grinding machine. Contact us for more information about this machine. Application Types EDM

Condition: used, machine/vehicle number: 008258, X axis working area: 3500 mm Y axis working area: 920 mm Main Electrospindle power: 7 KW Number of controlled axes: 3 axes Bdsdex A Hfcspfx Ab Tek Total number of drilling spindles: 15 Total number of tool changer positions: 4

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: MZsmcs01, type of input current: three-phase, Equipment: CE marking, This machine can be used for sealing round cans, such as aluminum cans, easy to pull cans, iron cans, plastic cans, paper cans, etc. Bsdpfx Abex Ancie Todk

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X81456, clamping force: 9,000 kN, screw diameter: 98 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, Injection molding machine including Sytrama robot! TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H × W): 1,570 × 1,560 mm Tie bar spacing (H × W): 1,010 × 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. daylight: 2,290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Shot volume: 4,010 cm³ Shot weight (PS): 3,690 g Injection pressure: 1,650 bar Max. injection speed: 400 mm/s MACHINE DETAILS Bedpfox A Ar Eex Ab Tsdk Control system: CDS700 Clamping unit weight: 44,500 kg Injection unit weight: 12,500 kg EQUIPMENT Pneumatic valves: 4 units Core pulls: 1 fixed / 1 movable Sytrama 101 GL robot

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8 Bdodpfx Abohwi U Tj Tjk

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm Bdodpfxot Hmt Io Ab Tsk No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Bsdpfxewuclxe Ab Todk Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm Bdodpfx Aog E Th Sob Tjk No of Top Units: 2 Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Bedpfx Abjum H Ekj Todk Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16 Bjdpfowuz Ekex Ab Tsdk

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Bdedpfxoxmgybe Ab Tjk Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Bodpfjx A E Tfjx Ab Tedk Total number of drilling spindles: 12 Total number of tool changer positions: 15