Cake cutting machine for sale
Your location was not identified (Edit)
Cake cutting machine Universal
Completely made of stainless steel on rollers
Air-driven knife made of stainless steel with protective rails
6 Different linear spacing for distance snap-in
3oqne3yns
Top condition and ready for use more
KR-DUO cutter system
Zjilrx2
Individual adjustment of the size of the piece
Suitable to baking sheets up to 800 x 600mm
The cutting process is effected in two stacked cutting levels more
Ultrasonic cutting machine for cutting
Nnv3j
frozen cream gates
Cake diameter 180 to 300 mm
Cake height up to 95 mm
Due to the existing manual partial table, divisions of
4, 12, and 16
Time-consuming for automatic cutting approx. 1 second
Compressed air required more
This automatic cake cutting machine will portion a variety of frozen or chilled round products including cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with spare trays and spare blade, 2017, stainless,
Serial: 5767
Dzvisfw9u more
The Quck cutting machine is suitable for 60x40x5 cm aluminium sheets
is automatic feeder for lengths and cross sections
Teflon coated stainless steel knives
Water Cleaning of knives
on wheels
Connection 16 Ah plug
8mofqvx9i
Machines weight 410 kg.
The machine is in TIP-TOP condition. more
2005
ready for operation (used)
Table: 1500x3000 mm
2sc8s3
Max. cut size: 1500x3000 mm
Thickness of cut materials:
Steel materials: max. 25mm (30mm)
Stainless materials: max. 25 mm
Aluminum and aluminum alloys: max. 25 mm
Technical condition: good, fully functional, new transformer, new hoses, possibility to test more
Technical data paper roll cutting machine
Manufacturer unknown
Type unknown
Year of manufacture unknown
Dimensions feed table for rolls:
Width inside of rolls 2.195 mm
Height inside of castors 465 mm
Transport dimensions Feed table over all:
2,650 x 1,300 x 2,150 mm (W x H x D)
Dimensions roller cutter:
Width cutting shaft inside 2.250 mm
Transport dimensions of the roll slitter over all:
3,050 x 1,550 x 550 mm (W x H x D)
Bzhf9mfq
Remarks:
There are no further data or documents availa... more
2017
ready for operation (used)
Serial No. 1360
Equipment number 10070608 / 30030386
Control ByVision
Capacity 3 kW
Thickness of cut Steel 20mm, Stainless steel 12mm, Alumimum 12mm, Brass 6mm, Copper 6mm
Maximum material size 3000mm x 1500mm
Zi83qpk
Maximum material weight 890kg
Max, positioning speed parallet axis X,Y 100m/min
Max, simultaneous positioning speed 140m/min
Cutting area X, 3048mm./ Y, 1524mm./ Z, 70mm
Input 400/3/50hz
Fitted with Dust collector
Equipment Sheet storage rack,
Features Abus crane and vaccum sh... more
Waterjet cutting machine with 5-axis head.
Total cut-off hours: 2.147 hours. Hours of operation: 7.484 hours. Dimensions axles: X-3.000mm Y-4.000mm Z-500mm.
Pump "KMT", press max.: 4.100bar.
Maximum part thickness: 200 mm.
Maximum permitted load of pieces: 790 kg / m2.
Number of cutting heads: 1 of 5 axes.
Bcdqs8s
Maximum cutting speed: 20 m / min.
Machine tolerance according to VDL / DGQ 3441: ± 0.05 mm / m.
Repeat accuracy: ± 0.025mm / m. more
2020
as good as new (ex-display)
LEOplus
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
J82pyb
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All steps between
-22.5° to +45° with an accuracy of +-0.1 degree
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with pre... more
Kama TS 105 used diecutter, 74x105 from 2006.
CLEANED AND INSTALLED, automatic die cutter for paper, cardboard, plastics, micro corrugated board up to 1.500 gsm/1,8 mm
Mufxk0 more
2010
ready for operation (used)
CNC control TRUMPF Siemens Sinumerik 840D
CO2
Working area of X and Y axes: 3000 x 1500 mm, in the Z axis direction 115 mm
Max. material thickness 20 mm
73 kVA electrical connection
max. workpiece weight 900 kg
infinitely adjustable power range 160 W - 3200 W
Czrk3298
Machine weight 11500 kg
Machine dimensions: d. 9800 x W 5300 x H 2000 mm more
2000
used
2-head waterjet cutting machine. Advances: "X" axis: 2.000mm. "Y" axis: 4.000mm. "Z" axis: 200mm. With pressure pump "KMT Pro3", 60hp, pressure: 6.200 bar. Total machine hours: 7.600 hours and 5.200 hours open jet pump. CNC numerical control "Siemens".
Bjd0sg8y8g more
2020
as good as new (ex-display)
ALCOR I
Bhnmtuzyvf
THREE-AXIS CUTTING CENTRE CONTROLLED BY CNC
APPLICATION: For cutting aluminium, PVC and wood profiles, blade Ø 550 mm.
MAIN FEATURES:
- Precise cutting at any angle between 30° and 150°
- Up to 7 profiles can be loaded
- Waste treatment capacity of more than 800 mm for new production
- No waste cutting
- CNC control, touch screen
- Data transfer via remote network connection, Internet and USB
- Remote access
- Pneumatic maintenance system
- High processing capacity to increase... more
Ram force: 230 kN
Punch stroke: hydraulic
Stroke depth adjustment: numerically adjustable
Stroke length adjustment: programmable
Ram speed adjustment: programmable
Number of turret stations: 20 pcs
Tools: Thick Turret
Max. punch diameter: 89 mm
Max. material thickness: 8 mm
Max. sheet weight: 200 kg
Clamps: pneumatic 2 pcs (optional 3 pcs)
Max. sheet size (X x Y): 2530 mm x 1270 mm
X-traverse: 2584 mm (X-42... X2542)
Y-traverse: 1317 mm (Y-25... Y1292)
Axis speed (X-axis), max. 80 m/min.
Axis ... more
2020
as good as new (ex-display)
ALCOR II C
8-axis CNC-controlled cutting and machining centre
7 spindles
APPLICATION:
For cutting, milling, punching and marking on 4 profile surfaces
MAIN FEATURES:
- Precise cutting at any angle from 30° to 150°
- Up to 10 profiles can be loaded
- No waste cutting
- CNC control, touch screen
- Data transfer via remote network connection, Internet and USB
- Remote access
- Pneumatic maintenance system
Nvkij
- High processing capacity to increase efficiency
- Processing on 4 profile surfaces pos... more
2020
as good as new (ex-display)
ALCOR II R
PVC cutting centre
Used for cutting, milling, punching and marking on 4 surfaces of PVC profiles.
Servo-controlled cutting
Servo controlled pivot axis
Automatic positioning in all degrees between 30° and 150° with servo drive
Robot with pneumatic handle and servo axis control and manual adjustment function for accurate profile positioning
Industrial PC with Windows-based touch screen and easy to use practical interface
Remote access Data transfer with remote control Network connection... more
Made in Czechoslovakia TOS Celakovice
Machine for the production of spur gears with straight and helical gears, sprockets and worm gears
dimensions: L x W x H: 3915 x 2650 x 2410 mm
weight 13500 kg
Total power consumption of the machine 22 kW
Largest head diameter of milled wheel 710 mm
The largest gear module of the milled wheel 10 mm
The longest travel of the milling support 450 mm
The largest distance of the tip of the support arm from the table area is 770 mm
Ysrkuk
The largest angle of incl... more
Table dimensions: 2x 2450x1150mm, including 2x Industrial Robots ABB IRB 1600 and High Pressure Pump BHDT HYTRON 40.37.
Y3c0nl more
LINE FOR CUTTING AND STRAIGHTENING RE-BAR/REBAR.
Automatic line is designed for straightening and cutting of smooth re-bar diameter from Ø6mm to Ø16mm and ribbed re-bar from Ø5mm to Ø12mm, depending on machine type.
Except straightening, machine cleans re-bar from dirt and rust.
Complete line set consists of wheel for re-bar pulley, machine for straightening and reception desk for straightened re-bar.
Machine operates by principle of „flying bushes“ (rings).
Instructions for use line for cutt... more
CNC plasma cutting machine ESAB
Size Work area
8500x2500
Number of burners
3 x autogenous (up to 200 mm)
1 x plasma (Hypertherm HPR260 since 2016)
Operating data:
Cutting capacity unalloyed steel
Beardless* 32 mm
Hole piercing (production) 38 mm
Bl0b9q3bri
Maximum cutting capacity 64 mm
Cutting capacity alloyed steel
Hole piercing (production) 32 mm
Maximum cutting capacity 50 mm
Cutting capacity aluminium
Hole piercing (production) 25 mm
Maximum cutting capacity 50 mm
With Nesting Software
This... more
Specifications
Catalog No. : 4333
Type: RUM 3000 P HD
Producer: Pierce
Made in: 2014
Characteristic:
Length of the working table: 12 m
Width of the working table: 2.5 m
Total power demand: 200 kW
Material thickness:: 2-40 mm
Equipment:
Extraction table
Steqf0
Programming software LANTEK
Plasma source HPR260
Retractable portal with burning nozzle more
used
thread dia. 2 Zoll
threading length , mm
thread pitch 2 Zoll
bolt thread from 1/2 - 2 Zoll
total power requirement 0,5 KW
weight of the machine ca. 60 kg
dimensions of the machine ca. L 800 x B 500 x H 600 mm
cooling oil pump
Cutter
tripod
Bhvskdkctj
automatically oeffnender Universal Die head
Elektric 220 Volt
Machine dealer with own stock of 2500 m². more
table length / mm
table width / mm
burner heads /
-----
DESIGN -CUTTING SYSTEM-
- Design: portal type
WORKING RANGE -CUTTING MACHINE-
Mupadw
- laser capacity 4000 W
- number of processing axes (excl parallel axes) 3
- X-axis travel 3070 mm
- Y-axis travel 1550 mm
- z-axis travel (vertical) 200 mm
- sheet thickness max. St37 25 mm
- sheet thickness max. (V2A) 15 mm
- sheet thickness max. (alumina) 10 mm
ELECTRICAL SPECIFICATIONS
- mains power supply 72 kVA... more
table length unbkt. mm
table width unbtk. mm
burner heads unbtk.
Beofhoym22
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m more
Working hours machine: 51614 h (new TurboBlower 02.02.18: 50.635 h) h
Laser power: 4000 Watt
Working range laser: 2520 (5040) x 1550 x 300 mm
Bczxurbnwz
Max. steel: 12 mm
Max. stainless steel: 10 mm
Max. aluminium: 8 mm
Length: 5745 mm
Width: 2630 mm
Height: 2789 mm
Machine weight: 7700 kg
Electrical connected load: 65 kVA
Standard configuration
- max. load of table: 330 kg- speed of axis: X/Y 80 m/min- simultanous: 113 m/min- speed of Z-axis: 60 m/min- Positionsabweichung: +/- 0,01 mm auf 500... more
2010
used
Control system: MS-100
Length of the working table: 12000 mm
Width of the working table: 3500 mm
Maximum thickness of the cut sheet metal: 10-200 mm
Maximum feed rate in X-axis: 30000 mm/min
Maximum feed rate with simultaneous operation of the X and Y axis drives: 7000 mm/min
Accuracy of positioning: 0.3 mm
Total power demand: max. 1.5 kVA
Nnnyt
Machine weight: 1650 kg more
table length mm
table width mm
burner heads
-----
DESIGN -CUTTING SYSTEM-
- Design: portal type
WORKING RANGE -CUTTING MACHINE-
- laser capacity 1300 W
- number of processing axes (excl parallel axes) 3
- X-axis travel 2685 mm
- Y-axis travel 1270 mm
- z-axis travel (vertical) 100 mm
- sheet thickness max. St37 15 mm
- sheet thickness max. (V2A) 8 mm
Cfslgor
- sheet thickness max. (alumina) 5 mm
- workpiece load (max) 400 kg
ELECTRICAL SPECIFICATIONS
- ... more
x-travel: 4060 mm
y-travel: 3000 mm
z-travel: 1001 mm
laser capacity: 1800 - 4000 W
table length: 2 x 2700 mm
Table width: 2 x 2150 mm
control: Siemens Sinumerik 840D
total power requirement: 90 kVA
weight of the machine ca.: 12 t
dimension machine xH: 15x2,48x2,97 m
dimensions electric cabinet LxWxH: 1,85x1,00x2,10 m
dimension laser device LxWxH: 1,35x1,12x1,80 m
dimension filtering system LxWxH: 1,6x1,25x2,80 m
Ufcgcb3hw
dimension HF- Generator LxWxH: 1,50x0,96x2,05 m
dimension cooling device... more
table width 1500 mm
Bjtozur9mw
table length 3000 mm
burner heads 1
Flame cutting machine - plasma cutting machine (1x plasma and 1x oxy-fuel) Maximum sheet thickness when cutting (steel): 50 mm - Power column HyPerformace Plasma HPR 260 - Software was updated in January 2020 for 10,000.00 - Extraction DONALDSON type: as new - The machine has already been dismantled and can be loaded more
thread dia. M6 - M36 M
turning speeds 150 U/min
Bhcnubq8po
working area 1200 Rmax.
engine output 1,2 kW
voltage 230 V
weight ca. 50 kg more
Working area: 3.000 x 1.500 x 115 mm
Control: Bosch CC220
Xy0sw
Laser power: 2.600 Watt
Max. thickness: mild steel 15 mm
Max. thickness: stainless steel 6 mm
Max. thickness: aluminium 5 mm more
Technical details
working area 1500 x 3000 mm
laser capacity in Watt 2600 Watt
total power requirement 71 kVA
2 D laser cutting machine.
Cutting capacity:
Steel up to 20 mm
Stainless steel up to 20 mm
Aluminum up to 15 mm
Tube lasers up to Ø 410 mm and a wall thickness of 8 mm.
Io0jprh9i
Information from the previous owner:
The machine has been serviced regularly.
Wearing parts were replaced as required, for example hoses,
mirror.
The resonator was renewed in 2005, since then the machine has
... more
table length / mm
table width / mm
burner heads /
WORKING RANGE -CUTTING MACHINE-
- laser capacity 5000 W
- X-axis travel 3050 mm
- Y-axis travel 1600 mm
3jsnqkwt
- z-axis travel (vertical) 150 mm
- workpiece load (max) 900 kg
DIMENSIONS / WEIGHTS
- space requirements -left/right- 9700 mm
- space requirements -front/back- 3600 mm
- total height 2500 mm
- total weight approx. 10000 kg more
Control: MAZATROL Preview 3
workpiece dimensions: 1.250 x 2.500 mm
Resonator power: 2,5 kW
Braxjdu
Gas consumption: 10 l/h
cutting capacity:
mild steel: 20 mm
stainless steel: 10 mm
aluminium: 8 mm
equipment:
Focus position detection
Automatic nozzle change
Automatic height detection
Automatic nozzle cleaning
Puncture recognition
Plasma detection
Abrasion detection
Weight of the machine: 11.000kg
Machine dimensions (LxW): 10.800 x 4.100 mm more
- NEW -
manufactured by Hoffmann
type X line 20
technical details:
motor 1 x 530 w
idle speed 29000 1/min.
operation manual
workpiece clamping manual
headroom 110 mm
milling depth 0 - 80 mm
dust extraction hood D 60 mm
dove tail size W-1/2/3
dimensions B/T/H mm
600 x 540 x 770
weight 19 kg
Stock number W 100 0200
with diverse fence systems
located in 97447 Gerolzhofen
Wyain2rnj more
Working hours laser on: 12191 h
Working hours beam on: 4624 h
Laser power: 3000 Watt
Working range laser: 4064 x 2024 x 70 mm
Max. steel: 20 mm
Max. stainless steel: 12 mm
Max. aluminium: 12 mm
Max. copper: 6 mm
Max. brass: 6 mm
Length: 13700 mm
Width: 6670 mm
Bibpieyj7q
Height: 2565 mm
Machine weight: 15000 kg
Electrical connected load: 22,7 kVA
Standard configuration
- Shuttle table system with two shuttle tables- Cooling system- standard dedusting system, incl. dust bag and sound insulation... more
Catalog No. : 5145
Type: MG 6001.20 PrkB+CH1 200P
Producer: Microstep
Made in: 2018
Characteristic:
Bmzq2d0hpx
Length of the working table: 6000 mm
Width of the working table: 2000 mm
Equipment:
3D head
Drilling and tapping arm more
Cutting area 4000 x 2000 mm
Bdsk0lisee
Rated power 37 kW
Delivery time approx. 12 weeks from order placement
Max material thickness: structural steel: 200 mm
Stainless steel: 150 mm
Aluminium: 120 mm
Glass: 100 mm
PVC: 150 mm
Number of Heads: 1
Cutting range X-axis: 4.000 mm
Cutting range y axis: 2000 mm
Z-axis stroke: 200 mm
Max simultaneous positioning speed of X, y: 85 m / min
Max cutting speed: 20 m / min
Positioning accuracy according to VDI/DGQ 3441: +/-0,05 mm / m
Repeatability: +/-0.025 ... more
max. wheel diameter 275 mm
max. module 6
min. module 1,5
Control SINUMERIK 840 C
tooth width 5,5 mm
spiral angle min. 0 / max. 60 °
max. number of teeth 120
Nlpgx
min. number of teeth 5
ratio of transmission 1:10
min. ratio of transmission 1:1
work piece spindle speed max. 110 U/min
blade head turning speeds 20 - 110 U/min
total power requirement 100 kW
weight of the machine ca. 15,5 t
dimensions of the machine ca. 5,20 x 2,30 x 2,40 m more
thread dia. M 5 - M 30 mm
Boring power 35,0 mm
Boring depth max. 90,0 mm
Bikgiucorx
Center of spindle to wall or column 280 mm
Column diameter 120 mm
Size of table plate 550 x 400 mm
total power requirement 1,2 kW
weight of the machine ca. 365 kg. more
Working hours laser on: 36373 h
Working hours beam on: 10840 h
Laser power: 2700 kW
Working range laser: 6500 x 1500 mm
Max. steel: 8 mm
Max. stainless steel: 5 mm
Max. aluminium: 4 mm
Length: 18000 mm
Width: 9000 mm
Height: 2800 mm
Machine weight: 17700 kg
max. wall thickness: 6,4 mm
max. tube length: 6500 mm
min. tube length (automatic): 3000 mm
max. tube diameter: 150 mm
min. tube diameter: 15 mm
max. length finished parts: 6500 mm
max. tube weight: 20 kg/m
max. tube bundle weight: 4000 kg
ma... more
Control System: IMSNC MicroStep CNC
Power on time: 1715
Total Operation time: 1415
Max. working format: 13500x3000 mm
Beztcdto2m
Max material cutting thickness:
Plasma: 80 mm
Oxy-fuel: 150 mm
Plasma Source: HiFocus 440i + FlowControl 3
plasma torches: PerCut 370.1 and 370.2 (for different material strengths). Kjellberg
3D cutting head for plasma torches
Rotator bevel cutting head with 3 pcs oxy-acetylene burners for shape cutting
Oxy acetylene torch
3D Rotary Table Filter... more
new
Pipe Ø 20-170 mm
Laser power 2 kW
Delivery time approx. 3 months from order placement
Laser power: 2.0 kW
Max. Sheet metal thickness:
construction steel: 8 mm
stainless steel: 4 mm
Aluminium: 6 mm
Max. Pipe Ø: 170 mm
Min. tube Ø: 20 mm (Ø 12 optional)
Max. Dimensions square profiles: 120 x 120 mm
Max. Dimensions rectangular profiles: 150 x 100 mm
Max. profile length: 6.500 mm
Min. profile length (for automatic feeding): 3.000 mm
Max. profile weight: 37,5 kg/m
Automatic feeding: yes
Automatic exi... more