Capsuling machine

GAI 4264D

Condition: good (used), Year of construction: 2015, Beer Bottling line, Made by: Framax 9-8-1 Filler, Counter pressure filler, isobaric, double pre-evacuation, Modulblock RFCI 09-08-1 DPS-C, Year: 2014, adjusted to 330 ml 0,33l, 33cl + 0,50 glass bottles, Labeller Labelling machine, self adhesive labels Ndodpfx Afet Akdijfjf

Condition: used, Year of construction: 2019, Overview This carbonator from Italian Manufacturer Sfoggia was built in 2019. It has had very little use and is in immaculate condition.   Technical Details Capacity: 2,500 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels - max pressure: 6 bar Dimensions (LxWxH): 1000mm x 820mm x 2100 mm Weight: 150 kg Nedpfx Asr A S E Heffsdf

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Njdpfxjl Hx Ado Affedf

Year of construction: 2004, condition: used, Used Kilian E 150 PLUS single sided rotary tablet press. Has stainless steel covers. 26 stations capable of up to 16 mm tooling, EU-B of toolings. Manually adjustable fill depth up to 20 mm. Pre-pressing at 23 kN and manually adjustable main pressure up to 100 kN (10 tons). Maximum capacity 162 800 tablets per hour. Stainless steel change-speed forsed feeder. Press is driven by el. Motor 4kW/3ph/400V/50hz with frequency changer. New 2004. Nsdpfjwm Ar Aex Affedf

Condition: used, Year of construction: 2014, Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl long neck, 75 cl ”champagne-style” and 375 cl champagne style. The capacity is 1000-1300 bph when doing 33 cl long necks. Equipped with pneumatic offloading solution. Machine list Labeling Machine (2014) Manufacturer: CDA Model: R1000 Filler Capper (2014) Manufacturer: Kohem (now Cimec) Model: RIS 8/1 - DPS Ndsdpott Um Hefx Affjf

Condition: used, Year of construction: 2016, Overview This brew house was built in 2016 by Spanish manufacturer Prominox Villarobledo and has a wort volume of 30 hectoliters. Fermentation and storage cellars and various accessories are included. All the equipment has already been dismantled and stored. Scope of delivery  Electrical panels for tanks and pumps Stainless steel tank | model DFF99 | 2000 | 25,000 liters Labeler | model MC-220 | 2016 | 1300 bph (up to 1.5 liters) Filler | model AM DPS 811G | 2016 | 1200 bph (0.33 liters) Sealer | model SK2 | 2016 | Semi-automatic box sealer, motor speed: 20 m/min, power: 0.13 hp 2x Horizontal tank | model AD MERKBLATTER | 2016 | Isobaric 3,000 liters 4x Fermentation tank | 3,000 liters 2x Fermentation tank | model PROMINOX | 2016 | 5,000 liters Open tank Low tank | model STORK TGSW Filter | model PSF JB 014 350143 | 2017 Grinder | model OOEHLER OL 6000 | 2016 Silo and feeder Resistance tank | model PROMINOX | 2016 | 3,000 liters 2x Brewing/mashing tank | model PROMINOX | vertical | 2016 | 3,265 liters Filter tank | model PROMINOX | 2016 | 4,500 liters 2x Pump | model MIM GRUP FL31Cl Pump | model CALPEDA MXH 204/A Industrial scale | model GRAM MISSIL F2-60 Pump | model LOWARA HTB 32-125/30 Pump | model ABB INOX MIM GRUO FLUID-102 Industrial sink Refrigeration chamber Pump | model PYD SH2-40 Osmosis system | model HIDROTEC Water treatment system Cooling system | model AIRWELL AQVH,125BLN,R410A,BFC,1P | 2010 Compressor | model INGERSOLL-RAND 11BAR | 2001 Boiler | model ATTSU RL-400/12 Forklift | model NICHIYU FB18PN-55-450 PS PL | 1999 Nsdpfstzg H Djx Affedf

Condition: used, Year of construction: 2012, KEG filler, make Lambrechts, semi-automatic, 60 KEGs/h at one-way KEGs, 1 filling stations, in stainless steel, control cabinet with touch panel, compact design, overall dimensions L: 800 mm x W: 870 mm x H: 1980 mm , year 2012 Ndedpjrxuitsfx Affsf

Condition: used, Year of construction: 2019, Used Capsuling Machine Nortan Prisma 2019 The Nortan Prisma 40 capper of 2019 is a cutting-edge machine, designed to guarantee high performance and reliability. With a voltage of 400 volts and an absorption of 2 kW, a frequency of 50 hertz and a mass of 1400 kg, this capper is perfect for working with an air pressure of 6 bar. The machine is anti-clockwise and has a maximum speed of 2000 pieces per hour on both types of capsules, shrink and snare polylaminate. The operator panel, positioned on the upper left part, is analog and includes a small PLC. Nedsvgvyhepfx Affsdf The control key and the start and stop are manual. This Nortan Prisma 40 capper is like new and immediately available in stock, after a short pre-maintenance to check that everything is perfect. If you are looking for a reliable and performing capper, this Nortan Prisma 40 from 2019 is the right choice for you.

Condition: used, Year of construction: 2013, Used capsuling equipment Nortan Prisma 4T 6000 bph This used capsuling equipment was rebuilt in 2013 as a new, and shrink-wrap capsule type. Safeguards are available for this Used rotary capsuling machine There are three different sets of bottle equipment available. The machine has been checked before dismantling. It is in good working condition and has been in operation until September 2021. It has automatic storage for the shrink capsules. A photocell connects the components to the main structure, which releases capsules for incoming bottles, completely automatically and synchronized. Despite its simplicity, maintenance is very important for this capsuling machine. The thermal heads and their gaskets, need to be checked carefully. Ndodpevguvzsfx Affjf The electrical panel is in order and complete with all cables and PLC, manuals, and wiring diagrams. The floor space required for this used capsuling machine square meters 4,50. Max. speed is 6,000 b\h. The Used rotary capsuling machine, has a whole set of stars, augers, and counter-stars to convey the bottle correctly. The direction of entry is from left to right and therefore clockwise. This machine is specific for glass containers. It can handle formats ranging from 0.50 L, to 0.75 L up to the size of 1 L. Nortan is one of the most common brands in circulation, it is therefore easy to find any spare parts for the machine.

Condition: used, Year of construction: 2007, Used Shrinkable Capsuling Machine Robino & Galandrino Monostadio Z9T The Used Shrinkable Capsuling Machine Robino & Galandrino Monostadio Z9T is a shrinkable capsuling machine designed to optimize high-performance bottling lines. In fact, this model delivers an advanced technical solution, providing precise and reliable application of PVC shrinkable capsules on bottles of various sizes and types. This machine handles bottle formats with diameters ranging from Ø55 to 120 mm and heights from 220 to 360 mm. Main Technical Features Manufacturers produced the machine, model Monostadio Z9T, in 2007. It features a rotary multi-bell distributor with 9 heating heads. Consequently, this configuration ensures uniform heat distribution, which allows the capsules to shrink evenly and adhere perfectly to the bottle neck. Moreover, the multi-bell system optimizes capsule handling, minimizes downtime, and maintains continuous production without interruptions. Engineers designed the clockwise rotation to optimize the capsuling machine’s integration into existing bottling lines. In this way, it reduces the necessary plant modifications and enhances the overall flow of the production process. Production Performance of the used shrinkable capsuling machine The Used Shrinkable Capsuling Machine Robino & Galandrino Monostadio Z9T achieves a production capacity of 15,000 bph. Therefore, it proves ideal for companies that require high production volumes while ensuring precise capsule application. Capsule Types and Compatible Materials Ndjdpfx Aevxz Afeffof This capsuling machine supports the use of standard PVC shrinkable capsules and features an advanced distribution and shrinking system. The machine precisely positions the capsules onto the bottle neck through a rotary distribution mechanism, ensuring accurate placement before initiating the heat-shrinking process. The shrinkable material securely seals the closure and enhances the product’s aesthetic presentation. Furthermore, the machine includes a standard capsule storage system, which facilitates refilling and handling of consumables while minimizing downtime. Operational Advantages of the Robino & Galandrino machine  This used shrinkable capsuling machine offers operational reliability through its robust design and advanced heating technology. Indeed, the 9 heating heads allow precise temperature control, preventing overheating or uneven capsule shrinkage. Additionally, the rotary distribution system aligns the capsules perfectly on the bottle neck. Consequently, it reduces production waste and improves the line’s overall efficiency. This improvement is particularly important for large-scale operations, where even small efficiency enhancements can translate into significant cost savings. This machine also features a built-in dryer, which serves the crucial function of drying the bottle surface before the capsule application.