Used Crimp for sale (154)

Year of construction: 1992, condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Technical data: - Maximum material thickness with a tensile strength of 40 kg/mm²: approx. 3 mm - Shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW - Space requirement: approx. W 550 x H 1200 x D 1200 mm - Weight: approx. 180 kg Dsdpfxshrm Iuj Aiiocp

Condition: used, Hydraulic pump, HAWE high-pressure hydraulic pump unit with 1.1 kW motor (450 bar), Used Machine HYDRAULIC PUMP: Manufacturer / Brand: HAWE Hydraulik (Made in Germany) Type: R 2.5 Nominal Pressure (Pn): 450 bar (high-pressure version) Displacement (V): 1.76 cm³/rev ELECTRIC MOTOR: Type / Model: 4AP 90S-4 Power: 1.1 kW (1.5 HP) Operating Voltage: 400/230 V (Y/Δ) Current: 2.7 / 4.6 A Speed: 1410 rpm (50 Hz) Protection Rating: IP54 (S1 continuous operation) Insulation Class: Class F APPLICATION: Dcjdpfxj Ahxr Te Aiiop Ideally suited for high-pressure industrial hydraulic systems, hydraulic presses, workshop pressing applications, tearing and crushing machines, cable lug crimping machines, and other special-purpose machinery requiring high hydraulic pressure. OVERALL DIMENSIONS: Width: 500 mm Depth: 200 mm Height: 290 mm

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Type SME 200/11 year of construction 2006 throat 1100 mm connected load 5,5KW max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Dodpfx Aoh Hgdrjiijcp Table-top version of sheet guide device Total weight 6700 kg The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). No Sales to private persons

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Dcsdpfjz Afhpox Aiiop Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: new, plate thickness 2,5 mm roll-body distance 260 mm throat 500 mm distance between roll centers 92 mm Dedpfxsyvvq Re Aiiocp tool adaptor 35 mm speed 3,5 m/min total power requirement 1,5 kW weight of the machine ca. 295 kg dimensions of the machine ca. 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: new, plate thickness 4 mm roll-body distance 260 mm throat 500 mm distance between roll centers 132 mm tool adaptor 40 mm speed 5 m/min total power requirement 2,2 kW weight of the machine ca. 350 kg Dcodsyvvncjpfx Aiiep dimensions of the machine ca. 1650x700x1280 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: good (used), Parker 82C 061 hose crimping machine for hoses from 1/4" to 1 1/4" (depending on the crimping dies) with 5 sets of crimping dies (colors see images). Included is an Enerpac PUJ1200E hydraulic power unit, as well as a TONE SM 210-SL hose cutter, manufactured in 03/2016. The table is also included. Dcedpfjz N Slmjx Aiisp The equipment has been checked for proper functioning and has undergone electrical inspections, which were carried out by an electrical company.

Year of construction: 2008, operating hours: 30,000 h, condition: ready for operation (used), Automation equipment manufactured in 2008. This KOMAX Alpha 433 L system is designed for the automatic processing of cables, including cutting, stripping, crimping, and welding. It includes a Komax ADS 123 wire storage unit, safety enclosure, extraction system, and various crimping and processing modules. If you are looking to get high-quality cable processing capabilities, consider the KOMAX Alpha 433 L machine we have for sale. Contact us for further details. Komax ADS 123 (Wire Storage Unit) • Manufacturer: Komax France • Power Supply: 3 × 400 V (3P+N) • Frequency: 50–60 Hz • Maximum Power Consumption: 5,500 VA • Air Pressure: 4–6 bar Cosmotec Cooling Unit • Manufacturer: Cosmotec • Model: XVA36 03 320 • Frequency: 50/60 Hz • Current: 0.51 A Schunk KM-CFK-564MF (Welding Module 1) Dcedpezg Hm Uefx Aiisp • Manufacturer: Schunk • Model: KM-CFK-564MF • Year of Construction: 2012 • Rated Power (50% Duty Cycle): 120 kVA • Rated Primary Voltage: 500 V • Rated Frequency: 1000 Hz • Supply Power: 43 kVA • Secondary Working Current (50% Duty Cycle): 15.6 kA • Secondary Short-Circuit Current: 120 kA • Secondary Open-Circuit Voltage: Up to 8 V • Electrode Force: 31–187 daN • Weight: 180 kg Schunk KM-CFK-564MF (Welding Module 2) • Manufacturer: Schunk • Model: KM-CFK-564MF • Year of Construction: 2012 • Rated Power (50% Duty Cycle): 120 kVA • Rated Primary Voltage: 500 V • Rated Frequency: 1000 Hz • Supply Power: 43 kVA • Secondary Working Current (50% Duty Cycle): 15.6 kA • Secondary Short-Circuit Current: 120 kA • Secondary Open-Circuit Voltage: Up to 8 V • Electrode Force: 31–187 daN • Weight: 180 kg Scope of the system: • Komax Alpha 433 L fully automatic machine • Komax ADS 123 wire storage unit • Safety enclosure • Extraction system (AAT 260) • Operating computer and control unit • Various crimping and processing modules, optional • Further optional accessories available upon request Used for: • The system is in working order and has been used for the automatic processing of cables, including cutting, stripping, crimping and welding • All systems are currently still powered and fully functional • Approximately 30,000 machine hours

Condition: used, Year of construction: 1992, functionality: fully functional, RENZ Wire Closer Dsdpezzyw Ajfx Aiiscp Model CLE 70 Year 1992 CLE 70 electric spiral crimping device: Electric crimping via foot pedal Binds up to 34 mm (340 sheets) in one cycle Efficiency approx. 400 cycles/h depending on the type and format of the material Foot-operated cycle start allows positioning the material with both hands Supports spirals with a diameter of 3/16” – 1 1/2” regardless of pitch Quick settings of various spiral diameters in just a few seconds Quiet operation. The device does not require a compressor.

Condition: new, Year of construction: 2026, motorized beading machine Prinzing SME50 with swiveling upper shaft operation via foot pedal Speed steplessly adjustable via foot pedal 2 speed levels 0-8 m/min or 0-19 m/min Feed via hand crank complete with 9 pairs of standard rollers (V2/V4/V6/S6/BC/F6/BB/SK5/E20) hardened stop plate Dcjdemn S D Nopfx Aiisp plate thickness 1,25 mm roller center distance 50 mm throat 200 mm

Condition: good (used), Hang 101-50 Eyeletting machine The machine is in perfect condition and ready to use. Technical specifications: 1 eyeletting head (Hang 271 rivet, hole diameter approx. 6mm) Maximum capacity: 20 sheets Dcodpfx As Af E Edoiisp 230V power supply Front and side margins Operation: foot pedal or hand switch. The machine punches and crimps the eyelet in a single pass. Automatic eyelet feeding.

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Djdo Af E Ewjpfx Aiiscp Manufacturer: Sicom, Italy Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Maximum board size: 1000 x 900 mm Weight: 170 kg Pneumatic supply: 6-8 bar Automatic rivet feeding, material piercing, and mechanism crimping.

Condition: used, Year of construction: 2007, Manufacturer: Groninger Model : KFVG251 + DTE 1000 Year : 2007 Type : Filling, capping and crimping machine for sterile glass or plastic vials Application : Crimping bottles in sterile / aseptic environment Infeed turntable with deposit tray and push device Object detection station Tubular peristaltic pump: Flexicon Plunging filling heads: level filling Gassing station Capping station with feed hopper + vibrating bowls Crimping station: lateral crimping disc, on-the-fly cap pick-up, feed hopper + vibrating bowls Product exit / ejection Full technical documentation available.   Sizes available : 4 / 6 / 15 / 30 / 50 / 60 / 120 / 250 ml Cap: ø 13 mm and Ø 20 mm Dsdex R Daiopfx Aiiscp

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, POLY-CLIP FCA 3430 | Automatic clipping machine Manufacturer: Poly-clip System GmbH & Co. KG Model / Type: FCA 3430 Serial number: 859 Year of manufacture: 2011 Power supply: 400 V / 50/60 Hz / 3 phases Rated current: 4 A Power: 2.8 kW Dimensions: 1600 x 1250 x 2000 mm Machine weight: 595 kg Dcedpjy Um E Ajfx Aiiep Caliber range: approx. 24 - 60 mm Maximum cycle rate: up to 200 cycles/minute The Poly-clip FCA 3430 automatic clipping machine is an advanced, high-performance device that represents the absolute standard in the meat, sausage, and delicatessen processing sectors. This machine is used for automatically closing casings (both natural casings and collagen, protein, cellulose, and plastic casings) using aluminum clips. It is a key component in medium-sized and large meat processing plants for the mass production of sausages, frankfurters, kabanos, pâtés, salami, and dense food products packaged in sleeves (e.g., processed cheese, lard, offal). The FCA 3430 model is characterized by exceptional operational precision. When synchronized with a vacuum filler (e.g., Handtmann, Vemag), the machine automatically receives the filling, forms a baton of the desired length or weight, precisely crimps two clips simultaneously (closing the end of one baton and the beginning of the next), and – if required by the process – cuts the finished product using an integrated pneumatic knife. The machine flawlessly cooperates with the clip feed system, allowing for the automatic preparation of sausages for hanging on smoking sticks.

Condition: as good as new (ex-display), Year of construction: 2024, Hydro Pneumatic Corner Crimper EVP-350HP Hydro-pneumatic press operation Press Strength 2 x 3.500 KP at 8 Bar Press Depth 30 mm Back centring positioner with Pneumatic work piece clamping 3 sets standard crimping knives 3/5/7 mm Air service unit Djdpfxjuxx Us Aiijcp Profile support arms with Perdinax

Condition: ready for operation (used), Year of construction: 2017, Suitable for: screw caps, drop inserts, press-on caps, flip-top caps, cup-to-cup closures, pipettes, brushes, spray pumps, triggers, rubber stoppers, crimp caps, ROPP caps and other closure types, equipment: mechanical rotary indexing table, pneumatic cap feeders, closing station for 1 closure type, extraction connection, IBC including drip tray, continuously adjustable transition from the discharge arm, machine enclosure: stainless steel 1.4301 (AISI 304), max. output depending on bottle, fill level and closure type: 60 bottles/min, compressed air connection filtered, oil-free: 6bar, connected load: 1.5kW, power supply: 3x 400V, connection area height: 792mm, cable routing: 317mm, overall length: 4200mm, with documentation. An on-site inspection is possible. Dcedpfx Aiezadkleijp

Condition: new, Year of construction: 2025, MODEL : HF500 6” (12”) NAME: PANT CRIMPING PRESS- HEAVY DUTY Power 500 Ton MAX CRINPING RANE: 310MM OPENING TRAVEL: + 115 MMM OPENING WITHOUT THIS : 360 MM 90° ELBOWS 3” CLOSING SPEED: 18MM/SEC Dsdswbtaajpfx Aiiscp PRESSING SPEED: 1.4MM/SEC OPENING SPEED: 20MM/SEC NOISE LEVEL: 62 DBA DIVER: 5.5 KW 3 VAC SIMENE'S TOUCH SCREEN CONTROL PROPORTINAL PRESSURE POSOTONE CONTROL FIYAT: €64,000 DAP DELIVERY ON STOCK

Condition: used, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Dcodpfozg I Uyjx Aiiop Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Available history and documentation   These elements can be quoted separately. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: used, crimping tool for turned contacts Dcedpfevimw Aox Aiijp MS 3198 - 1

Condition: like new (used), Year of construction: 2026, Corner Crimping Machine WEGOMA Dodpfeyuziusx Aiiecp The EV175 has an automatic positioning system according to the profile width • easy convertible and adjustable by scale • dual foot pedal operation for clamping and crimping • laminated nylon support pads on table and support arms • second positioning key for special profiles and crimping tools on request • sinkable anvil, hydropneumatic • vertical clamping cylinders • weight of crimping knives easy adjustable

Condition: used, Year of construction: 2000, Single-head capping machine Zalkin TM125 La cadence maximale de cet équipement est d’environ 3000 flacons / heure L’introduction des bouteilles se fait par accumulation. Sens gauche -> droite Current format: Plastic capsule: diameter 60.5 mm x 4.5 mm Aluminium capsule: diameter 62 mm x 4.5 mm Possibility of changing the capping head. Roue 16 alvéole : diamètre primitif 530 mm / diamètre alvéole 56 mm - Distributeur de capsule (Bol vibrant + goulotte de distribution prise à la volée) type ADV N°6430 et 6428. - Table tournante : alimentation flacons Inlet belt: 2000 mm / width 110 mm Inlet belt on the machine: 1500 mm Outlet belt: 500 mm Crimping head 104 Tension : 380 Volts 50 hz coffret électrique coté sorti. Dcjdpsx Rz Htofx Aiiep 1 cellule de contrôle présence flacon capsule plastique 1 cellule de contrôle présence flacon capsule aluminium. 1 cellule détection d'accumulation 1 cellule détection de bourrage

Condition: used, Skinetta ASK 450 Stretch Banding Machine Purpose of the Machine The stretch banding machines in the SKINETTA series are designed for tightly wrapping individual or multiple products with polyethylene film. In contrast to shrink wrapping machines, the film is stretched tightly around the packaging before sealing. This tension is the main advantage of this process, reducing film consumption by up to 20%. A particular advantage of the patented SKINETTA sealing system is the stepless, precise metering. The film is sealed in a very small area (welded), resulting in a clean seal with minimal overhang. By using a SKINETTAther or SKINETTAshrink hot air hood and a sufficiently wide film, the overhanging film can be reduced laterally. This increases the stability of the container and prevents individual products in correspondingly grouped containers from falling out sideways. With suitable additional devices, a complete closure of the containers can be achieved by sealing, crimping, and folding the sides. The SKINETTA stretch banding machine program includes six basic models for film widths of 25 to 200 mm, 290 mm, 440 mm, 590 mm, 790 mm, and 1,250 mm. In addition to the single-lane version, two- to four-lane systems are available to increase production output. SK series (semi-automatic): In the SK series, the products are manually grouped on the machine table by an operator. The insertion into the film and the subsequent stretch banding process are initiated either via a foot switch or a two-hand control. A later upgrade to fully automatic operation is possible (except for model SK 200). ASK series (fully automatic): In the ASK series, the product feed, grouping, and subsequent banding are fully automatic with the help of appropriate additional devices. A modular system of feed, grouping, forming, and special components enables individual adaptation to a wide range of customer requirements. Thanks to more than 20 years of experience, proven standard components can be used for a wide variety of packaging tasks. Technical data Machine dimensions (basic machine) Dcedpsp U T Ifefx Aiisp Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Weight: 400 kg Power connection: 400 V Power consumption: 6.1 kW Additional equipment: rod chain conveyor You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, - Capacity 2.5 mm - Hydraulic roller adjustment - Axle length 250 mm - Ejection 160 mm - Roller diameter 96 mm Dcodeuray Sspfx Aiisp - Foot control - Brake motor - With 4 roller sets - Emergency stop - Documentation - 400V

Condition: ready for operation (used), Year of construction: 2010, A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Dodpsuxu Ifsfx Aiiecp

Condition: new, plate thickness 1,25 mm throat 130 mm total power requirement 0,75 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,1 x 0,6 x 1,2 m Flanging machine is equipped with: - Emergency switch - Footswitch Dsdovn U Dnopfx Aiiscp - 8 pcs. Roll sets