Used Crank Shear for sale (2,164)

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm metal sheet thickness: 4 mm throat: 70 mm rear stop: 520 mm Gtedpfx Ahsb H Ibuovjw power: 380 V, 6,3 kW space needed: 3200 x 2300 x 1270 mm weight: 4600 kg

Year of construction: 1971, condition: ready for operation (used), Large working width: 2000 mm for sheets up to: 3 mm clear distance between columns: 2050 mm throat depth: 250 mm Gedpfx Ahehy Tqaevotw Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 tons

Condition: good (used), Year of construction: 2008, sheet thickness (max.): 13 mm, cutting length (max.): 4,160 mm, DENER Hydraulic Shear 4100x13mm DMMH.4113 Brand: Dener Model: DMMH NC 4113 Year: 2008 Standard Control: Dener HT 071 Cutting Length: 4,160 mm Maximum Cutting Thickness: 13 mm Cutting Inclination: 2º Number of Hold-Downs: 19 Motor Power: 30 kW Cuts/min.: 8 Gtedpfx Aswi Snxohvew Manual Lubricator *Shear under inspection. Blades have been removed for grinding. Hold-downs have been removed for replacing seals and gaskets. Delivered fully inspected and with a 6-month warranty.

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, back gauge: 500 mm, Hydraulic Shear Brand: Casanova Gtodpfx Aswy Nhqehvew Model: VC-26 Year: 1995 Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Condition: used, functionality: fully functional, sheet thickness (max.): 6 mm, HACO 3000x6mm hydraulic guillotine shear TS-3006 Gjdpewx Ix Sjfx Ahvotw Brand: HACO Model: TS-3006 Power: Three-phase 380V Cutting length: 3,050 mm Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Manual blade gap adjustment via lever at the rear Weight: 4,500 kg Motor: 7.5 kW

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Godpfoxgdlnex Ahvetw Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: used, Year of construction: 2008, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Colmal Type: HS 40-13 Year: 2008 Controller: Delem DAC-350 Cutting width: 4050 mm Max. thickness: 13mm Incl. documentation and peripherals Incl. outfeed-conveyor Gtedpfxjwng Rxo Ahvsw Machine dimensions: 4800x2400x2650mm Machine weight: 15000kg - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1987, Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear Gtedpfxoyupxwj Ahvsw -Manufacturer: Peddinghaus, hydraulic profile steel shear type Peddiworker 400 -Drive: hydraulic -Pressure force: 40 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, pipe notching -Dimensions: 870/660/H1630 mm -Weight: 860 kg

Condition: used, Year of construction: 1986, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Darley Type: GS 3100x13 Year: 1986 Control: Conventional Gtedpfx Ajwnh Ncjhvew Cutting width: 3100mm Cutting thickness: 13mm Electric Backgauge Motor-power: 22kW Incl. frontloader-arm Total dimensions: 3750x1900x2150mm Machine-weight: 10000kg - Year: 1986 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), sheet thickness steel (max.): 25 mm, back gauge: 1,500 mm, power: 66 kW (89.73 HP), total length: 3,390 mm, total width: 3,000 mm, total height: 3,500 mm, empty load weight: 25,000 kg, workpiece length (max.): 2,100 mm, CNC Elgo backgauge Gsdpfx Ajyuk S Ejhvotw Adjustable cuttingedge: 0,3 > 3°30"

Condition: used, Year of construction: 2021, total length: 3,850 mm, total width: 2,350 mm, total height: 1,560 mm, Weight: 5.500 kg - Year: 2021 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 27869 - Drive system: CNC - Control system brand: Cybelec - Control system type: Cybtouch-8W - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 12.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 20 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Ball-bearing table - Transport dimensions: 3850mm x 2350mm x 1560mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gedpjx R R Tcsfx Ahvotw Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 8,500 mm, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, total length: 9,530 mm, Equipment: finger protection, The machine was overhauled in 2021! TECHNICAL DETAILS Cutting width: 8,500 mm Gjdpfxeyuaiaj Ahvstw Cutting thickness: 8 mm Rear stop: 1,000 mm MACHINE DETAILS Control: Conventional Motor power: 15 kW Dimensions & Weight Dimensions (L x W x H): 9,530 x 2,750 x 2,950 mm Machine weight: 55,000 kg EQUIPMENT Electric backgauge Finger guard: Fixed Angle adjustment: Motorized Cutting gap adjustment: Motorized Documentation CE marking

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm Gtsdpfx Ast D Nz Aohvjw shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: new, Year of construction: 2025, Alligator shear JMC 500 HD brand new AVAILABLE NOW, ex work IUT Beyeler AG, DE-06188 Landsberg Gtsdpfx Ahjhq Nk Rsvew

Condition: used, Year of construction: 2016, operating hours: 4,589 h, 2016 | Hyundai HX330L with demolition boom, standard boom & shear | Used Demolition Excavator | 4589 hours 📍Location: France, Corcelles-en-Beaujolais 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 165000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 68 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine was in good working order at time of inspection it has Small boom 4.30 stick3.20 large boom size in the inspection is all so fitted with air compressor which blows air in front of the main window screen to clear dust is fitted with rock guards on roof and front screen. New hydraulic pump changed 100 hours ago. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "35653 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Gtedpfx Aex Ndfvohvew ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Gtsdpfx Asydk Acjhvsw Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: used, Year of construction: 2013, total length: 4,110 mm, total width: 2,400 mm, total height: 2,100 mm, Weight: 7.250 kg Price: On request - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 607913428 - Drive system: CNC - Control system brand: Cybelec - Control system type: D-Touch-7 - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 Gtsdpfjytgapox Ahvjw - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 15 - Throat depth [mm]: 150 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Finger guard: Fixed - Transport dimensions: 4110mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 7250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2011, In good technical condition and fully operational. Year of manufacture: 2011. Maximum cutting length: 3100 mm. Maximum sheet capacity: 11373 up to 6 mm. Cutting blades: INOX. Gtsdpfx Aoytb Izehvjw Automatic adjustment of cutting clearance and blade angle. CNC control: Safan Touch Screen TS100. Machine weight: approx. 6 tons. Accessories: 2 x additional sets of INNOX spare blades (one set brand new) 1 x set of spare pistons 1 x spare computer TS201C (new – unused)

Condition: good (used), functionality: fully functional, Year of construction: 2012, Expected in stock in approx. 3 weeks Safan M Shear 310 - 6 Capacity: 3100 x 6 mm TS1 Inox Touch control Return to sender Gsdpfsytb Tdox Ahvetw Extra long back gauge of 1500 mm Scrap flap option Year of manufacture: 2012 Images are of another identical machine.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used 3 meter guillotine shear by Volz Eurocut (Romanian manufacture) Model: Eurocut 6.5 Capacity: 3100 x 6.5 mm Gedpfx Asytb Rpohvetw Electric back gauge Adjustable cutting angle Year of manufacture: 1994

Condition: used, functionality: fully functional, Year of construction: 1980, Used 3 meter guillotine shear by Haco Model: Toolmaster 36 Capacity: 3100 x 6 mm Gtsdoytb Inopfx Ahvew Adjustable backgauge Year of manufacture: 1980

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used 3-meter guillotine shear from Amada Model: GPS 630 Capacity: 3100 x 6 mm Electric back gauge Gtsdoytbxtspfx Ahvow Year of manufacture: 1994

Condition: ready for operation (used), sheet thickness steel (max.): 16 mm, power: 30 kW (40.79 HP), total length: 4,900 mm, total width: 2,000 mm, total height: 2,800 mm, empty load weight: 23,000 kg, workpiece length (max.): 4,050 mm, - CNC Frontgauge - CNC Backgauge - Highholdsystem - Unloading system Gtsdpfx Ahoyr Tgtevow Backgauge: CNC Cybelec 7300 High hold system: Yes Evacuation system: Yes

Condition: used, Year of construction: 2002, total length: 3,700 mm, total width: 2,150 mm, total height: 1,900 mm, Weight: 6.000 kg Gjdpfx Ahoyr Scgjvjtw - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: A10347 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3000 - Throat depth [mm]: 200 - Backgauge depth [mm]: 1000 - Finger guard: Fixed - Transport dimensions: 3700mm x 2150mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddicat 380 Electro-hydraulic professional punching and shearing machine Gjdpjyup Ixjfx Ahvetw Working pressure: 250 bar Punching force: approx. 500 kN 400 V 16 A power connection cable Supplied with several dies and punches. Includes 1000 mm stop Dimensions without stop: approx. 640 × 730 × 1600 mm Weight: approx. 600 kg