Beading machine flanging machine

Prinzing SME 200/11

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) Nodpfx Aeiryyajf Solg - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: new, including 1x220V 1x3P 32A 1x5P 63A sockets Continuous power: 40 kW / 50 KVA Engine: Fawde 4DX-65D, 4 cylinder, water-cooled Connection: sockets or circuit breakers Frequency: 50Hz Voltage: 400/230 V including electronic speed control, AVR, battery charger Comap AMF8 control with generator network grid feed in Nljdpfx Aeh R Tklof Ssg fl protection

Condition: used, length:1800 mm Nsdpecxxu Dsfx Af Sslg width:1200 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. Nljdpsbql S Hofx Af Seg 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm Nlodpjxcp Sfofx Af Sjg saw band length 3200 - 3400 mm table - swivable +/- 20 ° table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 911 kg traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting machine with automatic shuttle table Configuration 1. Bodor Power 3kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Mortise-and-tenon type plate welded segmented bed 5. Stretched aluminum gantry 6. Bodor servo motor and driver Njdpownt Eiefx Af Solg 7. Bodor rack and pinion 8. One-click processing 9. Bodor Lightning perforation technology 10. Expert database for high-speed cutting 11. Automatic cutting gas pressure adjustment 12. Open door protection 13. Cutting malfunction alarm function 14. Ergonomic remote control (Bodor Mango®) 15. Active anti-collision function 16. Intelligent anti-shake 17. Gas-saving continuous flow nozzle 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooler 21. Extraction system 22. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 14 mm STAINLESS STEEL 10 mm ALUMINUM 6 mm OPTIONAL: LANTEK EXPERT II CUT software incl. postprocessor Translated with (free version)

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder Nedsh I Nqwopfx Af Sjlg - etc.

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Nsdpfx Afjzh I Iio Selg Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, gasket and screws. Available new or used, immediately! The container has been emptied, cleaned, completely overhauled and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in form B, without a level gauge connection - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm of ground cover and 500 mm above ground - Externally coated with bitumen for protection - If required, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will immediately receive the exact freight costs. Inspection is possible at any time by prior appointment. Nlsdpshh Sprjfx Af Ssg We can also offer trade-in and purchase of tanks/containers of all types. Please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Nedozp Edwepfx Af Sjlg Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.