Used Crimping Machine for sale (64,187)

Condition: new, plate thickness 1,25 mm roll-body distance 250 mm throat 260 mm distance between roll centers 62 mm tool adaptor 26 mm speed 6,3 m/min total power requirement 0,7 kW weight 170 kg range L-W-H 1020x600x1500 mm Domestic equipments: - motor driven beading machine Dcsdpfx Aksyvvruscog - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: new, plate thickness 2,5 mm roll-body distance 260 mm throat 500 mm distance between roll centers 92 mm tool adaptor 35 mm speed 3,5 m/min total power requirement 1,5 kW weight of the machine ca. 295 kg dimensions of the machine ca. 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German Dcsdsyvvq Rspfx Akceg - CE mark / Declaration of Conformity

Condition: new, plate thickness 4 mm roll-body distance 260 mm throat 500 mm distance between roll centers 132 mm tool adaptor 40 mm speed 5 m/min total power requirement 2,2 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1650x700x1280 mm Dsdpfx Akjyvvncecscg Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: excellent (used), Year of construction: 2017, Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table Dedpjy Naz Tofx Akcocg - hydraulic lock for reversing the resistance unit

Condition: new, functionality: fully functional, Crimp force controller. Dedpjy Ivdbefx Akcocg

Condition: good (used), Year of construction: 2002, Technical Details : - Year - 2002 - Capacity - 20m2/h - max. width of mesh - 1000mm - Wire diameter range - 2mm - 5 mm Djdpfx Akokuy Sbecscg Line includes : - Mechanical wire pay of - Crimping machine - Weaving looms machine with hydraulick agregat

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 902, overall weight: 125 kg, input voltage: 380 V, type of input current: three-phase, We offer this as new OSTAS KMRP 1.2 crimping and flanging machine, year of construction 2024. Power Motor: 0.75 kW Working Voltage: 380 V Frequency: 50 Hz Roll Speed: 50 rpm Dcjdpfxjy E Hmho Akcog Total Weight: 125 kg Year of Manufacture: 2024 year If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2015, functionality: fully functional, sheet thickness (max.): 2 mm, overall weight: 2,600 kg, total length: 1,000 mm, input voltage: 480 V, We offer this used Prinzing BEA2-S riveting and flanging machine, year of manufacture 2015. Type: BEA2-S Material thickness: 1.5 mm Length: 1000 mm Serial number: 1007 Year of manufacture: 2015 Weight: 2600 kg Dsdpfxsy Ev Sms Akcocg Voltage: 480 V Frequency: 60 Hz Power: 19.5 kW Current: 40 A The machine is already disassembled. If you have any questions or need further information, please don't hesitate to send us a message or call us.

Condition: new, Year of construction: 2023, Corner crimping machine FOM INDUSTRIE BAIHA L Machine in stock - Max. profile height 200 mm - Hydro-pneumatic drive - Three pneumatic clamps - Min/max height of blade position from 0 to 180 mm - Kit for profile support - Digital counters for profile positioning - No. 2 right tool-holder - No. 2 left tool-holder - No. 2 knives 2 mm thickness - No. 4 tools 5 mm thickness - No. 2 fold-away profile fences Dcedpfsd E Eimox Akceg

Condition: new, Year of construction: 2026, neu 2026 090202 Mai 2026, Zwischenverkauf Türkei 3100 € 1.2 mm 100 mm 140 nm 8 Stk. 62 mm 0.75 kW 32 1/min 900 mm 450 mm 1350 mm 135 kg Haevy duty cast iron main frame Dedpfxowirx Ds Akcecg Brake motor Foot pedal Adjustable lower roll 8 set of rolls Complete with stand User manual in ENGLISH or GERMAN

Condition: good (used), Year of construction: 2002, functionality: fully functional, Gamma 333 fully functional. Dedpfxjy Ah R Ns Akcecg

Condition: used, Fasti 417 Beading and Flanging Machine with motorized drive and hydraulic adjustment of the upper roll Condition: Used Technical data Type 125/3 Capacity: 3.0 mm Roller center distance: 125 mm Throat depth: 500 mm Working depth: 430 mm Drive 2 (standard): 1.5/2.5 kW Drive 3: 3.0 kW Hydraulic drive: 0.75 kW Details Without rolls Without back gauge Gear motor with pole-changing capability V06/12 m/min. Dcjdpfoyxdl Isx Akcog

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 213, Atla Coop - Schuco Compact corner crimping machine. Various assembly steps can be efficiently implemented at just one workstation: punching the frame, milling the glue holes and injecting the glue into one or two-chamber profiles. The option to switch off the cutter and adhesive injection makes the machine universally applicable for different aluminium profiles, and manual controls for the cutter and pump facilitate handling. Dcjdpfxsxvnwto Akcsg Equipped with Schuco knives, Schuco bracing clamp, triangular support benches, user manual.

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Dsdpfx Aowf Hghokcscg Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm Dcedpfx Akox Hyhbscsg • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Corner Crimping Press Elumatec, Type: EP 124, Year: 2013 Dcsdpfxjyyq Eks Akcog Pressing height: 140 mm Pressing force: 70 kN (7 t) Drive: pneumatic With support arms and pressing knives Electrical connection: 230 V 50/60 Hz Compressed air connection: 7 bar Air consumption: 35 l per working cycle Dimensions (L x W x H): 1100 x 950 x 1230 mm Weight: 545 kg (Subject to changes and errors in technical data as well as prior sale.)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 22499, overall weight: 545 kg, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Dodpfx Akjyyq Dmscjcg Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset Support arms and pressing blades included as standard Machine is ready for operation. We can offer shipping.

Condition: used, functionality: fully functional, machine/vehicle number: D40L/8219, Offer Number: D40L/8219 Machinetype: crimping machine Make: WAFIOS Type: K70S Constr. year: Dcodpfx Aswi Thaekcsg wire diameter: 1- 5 mm speed - meter/min: ca. 15 Location: In our warehouse

Condition: new, Year of construction: 2026, Very robust, high-quality beading and flanging machines in heavy cast construction with electric motor drive – brand new. Optionally available with: - Hydraulic bending roll adjustment - Circle cutting device Maximum sheet thickness that can be formed = 3 mm steel sheet / S235JR, depending on roll configuration Throat depth in machine frame: 450 mm Maximum distance between upper and lower roll: 100 mm Two working speeds: 6 and 33 rpm Available at extra cost with steplessly adjustable working speed and frequency converter Time relay for limiting the working cycle Drive power: 1.8 kW Hydraulic drive power: 1.5 kW Dsdpjyxxf Aefx Akcjcg Weight of basic machine: 570 kg When used as a circle shear (option): Blank diameters from 300 mm to 1,200 mm (optionally up to 1,620 mm) Cutting capacity with shear blades: 3 mm steel sheet / S235JR Weight of machine with circle cutting equipment: 730 kg

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 6600 € 127.38 € Dcedpfxoynm Ngj Akcjg 4 mm 200 mm 300 nm 4 Stk. 126 mm 10 1/min 1475 mm 550 mm 1200 mm 460 kg reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules ALTERNATIVE: Version HIBKS 4,0 with hydraulic top roll adjustment € 9.100,--

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 2.5 mm 160 mm 250 nm 4 Stk. 96 mm 13 1/min 1475 mm 550 mm 1200 mm 320 kg Dsdpfoynm Naex Akcscg reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules ALTERNATIVE: HIBKS 2,5 with hydraulic upper roll feed € 7.600,00

Condition: new, Ostas Beading Machine KMRP 2.5 Includes 4 Tool Sets Features • Main body made of steel • Main motor with reduction gearbox • Shafts with bronze bearings Dodpfx Akeytb I Uocecg • Adjustable lower shaft • Specially hardened shafts • Forward and reverse movement of the lower shaft • Movable electric foot pedal • Supplied with 4 sets of rollers Technical Specifications: • Shaft length: 250 mm • Bending capacity: 2.5 mm • Roller diameter Ø: 98 mm • Throat depth: 160 mm • Motor speed: 5 m/min • Motor: 1.5 kW • Dimensions (L-W-H): 1400 x 550 x 1120 mm • Weight: 350 kg

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Dodpfx Akox Nd U Decocg

Condition: ready for operation (used), Techmaflex Scrimp 350 Hose Crimping Machine Crimping Range: 4-130mm Opening with dies: +54mm Dcedjyrd Nfepfx Akceg Crimping force: 350 t Opening without dies: 180mm Jaw base length: 115mm Dimensions: 765mm x 400mm x 750mm Weight: approx. 262 kg You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided (requirement: valid VAT ID number). Subject to prior sale. Visit our shop and check out our other offers. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description of the item are possible and reserved.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 380 kg, Dimensions (W x H x D): 950 x 800 x 1150 mm Dodsyl R T Djpfx Akcscg Weight: 350 kg Operating principle: hydropneumatic Operating pressure: pneumatic, 6 to 8 bar Air consumption: 10 liters per stroke Pressing force: 35 kN at 7 bar Air connection: R 1/4" Punching stroke: 20 mm Return stroke: 100 mm Max. punching height: 120 mm Max. profile height: 120 mm