Used Crankshaft Grending Machine for sale (63,736)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller model: Mazatrol 640M, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Spindle speed: 12,000 rpm Main drive power (5 min): 18.5 kW Main drive power (30 min): 11 kW Tool Changer Number of tool stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent stations: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg MACHINE DETAILS Control: Mazatrol 640M Interfaces: RS232, LAN, Floppy drive Dimensions & Weight Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 11,500 kg Operating Hours as of 23.05.2025 Operating hours: 6,585 h Cutting hours: 8,300 h Auto cutting hours: 8,374 h EQUIPMENT Documentation/manual Chip conveyor Relocation detector Automatic tool length measurement system Nsdpfx Aeya Dh Rsd Nokt Preparation for partition wall for pendulum machining 4th axis Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant, 5 bar

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 133, TECHNICAL DETAILS Spindle speed: 14,000 rpm Coolant supply through the spindle: 70 bar MACHINE DETAILS Year of manufacture: 2023 EQUIPMENT Direct tapping Tool magazine with 133 storage positions Pallet changer Two pallets with tapped hole grid Eight adjustable rinse nozzles at the spindle Flow monitor for coolant through the spindle Cooling system with chip conveyor BSW880 Interface for mist extraction Visual tool breakage monitoring BTS Toolholder HSK-A63 Coolant temperature control unit Direct measuring systems (glass scales) for X, Y, Z axes Njdpfx Ajyarhred Nskt Three-axis workpiece probe (Marposs Mida T25G) Double-layer cooling system (BDW 880) Automatic central lubrication Programmable axis mirroring Tool offset storage with 400 memory slots 54 (6+48) freely selectable workpiece coordinate systems Three-color signal lamp

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, number of spindles: 2, spindle speed (max.): 6,500 rpm, travel distance X-axis: 840 mm, travel distance Z-axis: 425 mm, Auction of a production line with robot and two workpiece palletizers! TECHNICAL DETAILS Travel distance X: max. 840 mm Travel distance Z: max. 425 mm Spindle speed: 6,500 rpm Workpiece palletizer capacity: 24 workpiece carriers Nkedpfx Asyap Nasd Nst Number of main spindles: 2 Number of tool turrets: 2 Number of tools per turret: 12 MACHINE DETAILS High-pressure pump: up to 120 bar per line Machine weight: 8,000 kg Cooling: Spindle and machine bed cooling EQUIPMENT Robot M6iB Workpiece shuttle system by Heilig Automation with 2 pick-up stations High-pressure pump up to 120 bar per line Chip crusher Workpiece palletizer with a capacity for 24 workpiece carriers

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,214 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller model: SINUMERIK 840 D sl/operate, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. main spindle speed: 20,000 rpm Max. torque: 250/104 Nm Tool holder: HSK-A63 Distance spindle center to table: 80 - 810 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 mm x 500 mm Max. workpiece weight: 500 kg Pallet change time: 9.0 s Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Number of tool stations: 40 Tool change time (tool to tool): 2.5 s Tool change time (chip to chip): 4.4 - 10.0 s Max. tool diameter: 70 mm Max. tool length: 550 mm Max. tool weight: 12 kg Rapid traverse speed: 60,000 mm/min Nsdpjyapvaefx Ad Njkt MACHINE DETAILS Control: SINUMERIK 840 D sl/operate High-pressure coolant: 70 bar Dimensions & Weight Floor space required: 6,000 mm x 4,000 mm x 2,700 mm Machine weight: 12.0 t Operating hours: 5,214 h EQUIPMENT Pallet changer Coolant tank Tool breakage monitoring

Condition: like new (used), Year of construction: 2005, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: will advise enquirer, pressure: 200 bar, this machine has very little use and is as new condition Nsdpfxjwgkhro Ad Nokt

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Nodpfx Ajv Dpy Ned Nekt Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR Nkedpotrd T Tefx Ad Nst 48.3mm 120mm CLR

Condition: used, Year of construction: 2006, table length 3000 mm table width 1500 mm laser capacity in Watt 4000 Equipment: - Closed machine frame with integrated laser unit - Laser unit: CO2 laser TFL 3200 high-frequency unit, maintenance-free turbo radial blower radial turbo blower, mirror telescope - Automatic pallet changer - Longitudinal conveyor belt for small parts / waste - Drives: Maintenance-free three-phase servomotors - Additional highly dynamic Xp-axis - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height adjustment and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Position laser diode Nkedpfjydfngex Ad Net - HI-LAS high-pressure cutting - Fast processing with SprintLAS - ContourLAS for the production of smaller holes - PMS plasma sensor technology - Automatic sheet outer edge detection - Programmable power cycles - Compressed air cutting - PCS Process Control System - Microweld - Spraying device for safe thick sheet metal processing - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic function, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-rigid light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS Nodpfx Asvr Hf Eod Nekt The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzbp06, Equipment: CE marking, The fully automatic horizontal automatic cartoning machine is a high-tech product integrating optics, electronics, pneumatics, and mechanics. Nkodpfx Ajya Uq Nsd Njt It is suitable for the automatic cartoning of various products. Its workingprocess involves the conveying of items; automatic opening andconveying of cartons; automatic loading of materials into the cartons;and automatic gluing and tongue insertion, among other complex sealingprocesses. The machine's exterior is entirely constructed of high-qualitystainless steel and is innovatively designed in strict accordance with thepharmaceutical industry's "GMP" standards. The transmission system isdesigned with overload protection and an emergency stop device. Theoperating system uses a human-machine interface video screen to ensureoperator safety.

Condition: used, Year of construction: 2008, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2008 Control : Heidenhain iTNC 530 Speed : 10000 rpm Movement X/Y/Z : 1800/2100/1250 mm Tool holder : HSK-A100 Spindle: Technology:Motorspindle Speed:10.000 rpm Power (max.):44 kW Torque (max.):288 Nm Taper:HSK-A100 Swivel range in B:-30°/+180° NC-Roundtable: C-Axis:360° Clampingsurface:ø1.700 mm Nodpfeydgp Eex Ad Nokt Tableloading (max.):8.000 kg In general: Toolmagazine:60 stations Rapid travers in X/Y/Z:50 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter, temperature control and High-pressure, 40 bar Workpiecemeasurement:Touch probe, m&h Toolmeasurement:Laser, BLUM Attachment spindle:GMN HC 140sc-42000/8 Processobservation:Operation mode 4 Setup operations:Electronic handwheel Further Equipment:Spindlechiller, Visiport

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1200/1300/900 mm Tool holder : HSK-A100 Spindle: Technology:Motorspindle Speed:12.000 rpm Power (max.):56 kW Torque (max.):356 Nm Taper:HSK-A100 NC-Swivelroundtable: Technology:Swivelroundtable with Torquedrive A-Axis:-/+ 130° C-Axis:360° Nedpfoydgpxex Ad Njkt Tableloading (max.):2.500 kg In general: Toolmagazine:50 Stations Rapid travers in X/Y/Z:50 m/min Accessory/Equipment: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and High-pressure, 80 bar Workpiecemeasurement:Touch probe, Heidenhain TS 460 Workpieceloading:Automated cabine roof Oilmistseparation:Mechanical extraction, Handte 1-0,75 Setup operations:Electronic Handwheel Further Equipment:Visiport

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: Nkedpfjwv Havex Ad Njt - Axial relief: 0 to +35 - Lateral relief: ±15 - Grinding carriage stroke, fine adjustment: 36 to 72 per min - Maximum grinding wheel diameter: 175 mm - Grinding spindle speed: 1925 to 3850 per min - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Nsdovdkdijpfx Ad Nskt

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Nkodpfswvgidex Ad Not Technical Data – Grinding Machine Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Feed rate (hod/min): 150 Table load (kg): 20 Control: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. If you have further questions, I am at your disposal.

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h Nkjdpoydf Ndsfx Ad Not CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Nsdpfx Asxy Tm Ied Njkt

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Nkedpfsxy Tmujx Ad Njt

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Njdpfxexy Tmno Ad Nskt

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Njdpfx Adsxzi S Ne Nskt Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Nksdpfx Adsxy Tlws Njt

Condition: used, Foil Stamping & Embossing Machine Kolbus PE 70 with automatic Feeder and Pre-stacking conveyor. Heißfolienpräge- & Prägemaschine / Foil Stamping & Embossing Machine Kolbus PE 70 Baujahr / Year 1979 - Serial-No. 178 Open cover size  min.170 x 100mm - max. 660 x 405mm Printing surface 420 x 355mm Pressing power 35 tons Geschwindigkeit / Speed max. 70 cycles/min. Vorstapel Föderband / Case Pre-stacking conveyor Anleger für Buchdecken / Feeder for cases Deckenausbiege Station / Case bending station Folientransportvorrichtung / Foil transporting device Folienabwickelvorrichtung / Foil unwinding device Nksdsydfwzspfx Ad Not Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Njdpfx Adeydfn Tj Nekt Machine in top condition.

Condition: used, max. wheel diameter 1000 mm Nodpfx Aoydfn Hod Nskt gear width 160 mm max. module 7 min. module 0,5 distance table - lower edge of ram 230 mm no. of strokes 31 - 175 Hub/min tool taper MK 4 total power requirement 6 kW weight of the machine ca. 5,2 t

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 130 / 80 mm gear width 180 mm max. module 4 min. module 0,5 spindle turning speed - stepless 300 - 3000 U/min control Siemens 840 D x-travel 200 mm y-travel 170 mm z-travel 250 mm milling head -swivable +/- 45 ° table diameter 168 mm Nkodjxlug Hspfx Ad Not table hole 65 mm clamping length max. 245 mm table turning speeds 0 - 1000 U/min total power requirement 51 kW weight of the machine ca. 9,2 t dimensions of the machine ca. 4,5 x 4,0 x 3,2 m