Used Guideway Grinding Machine for sale (64,927)

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons Njdpfxjw U A Rmj Alnjcu The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.

Condition: good (used), Year of construction: 2012, grinding width: 2,000 mm, workpiece weight (max.): 18,000 kg, grinding length: 8,000 mm, Manufacturer: Waldrich Coburg Type: 30-10 S 3640 Control system: SIEMENS 840D Year of construction: 2012 Guideway / Slide way / Surface Grinding Machine Universal grinding head S10 with 110 Degree tilting / 2500 Rpm / 7.5 kW Vertical grinding head S30 with Ø 600 x 150 / 930 Rpm / 22 kW Double SIEMENS 840D Control panel Left & Right side machine KNOLL HL650/4000 Filtration system new 2023 Automatic doors (4x) for easy machine / load / clamping acces Hydraulic table drive with 18000 kg work load Rebuild in 2012 for 1.5 Mil EUR Large package flanches and stones Large package spare parts / ballscrews / measuring / protection covers Specifications Metric US Standard X - axis 8825 mm Y - axis 3010 mm Z - axis 2500 mm Table length 8000 mm Table width 1800 mm Table load 18000 Feed X - axis 1 - 45.000 mm/min. Feed Z-axis 100 - 3000 mm/min. Grinding stone dimensions 600 x 150 mm Power output 22 kW Rotational speed 930 rpm Coolant system Knoll 4000 L Ncsdpfxotp T N To Alnju Feed Y - axis 1 - 700 mm/min. Dimensions (estimate) length 24360 mm width 9550 mm height 7000 mm weight 80200 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Guide rail and surface grinding machine WMW FRITZ HECKERT Aschersleben Type SZ 1000 x 1250 x 3000 / 344 Manufacturer's No. 13.2236.2 Year of manufacture 1989 Nominal grinding area 3000 x 1250 mm Table clamping surface 3240 x 1000 mm Grinding length max. 3300 mm Processing width 1250 mm Processing height 1250 mm Grinding wheel diameter (surface grinding support) max. 600 mm Grinding wheel width (surface grinding support) max. 100 mm Grinding wheel diameter (swiveling support) max. 450 mm Mains connection 400 Volt, 50 Hz - Swiveling grinding support, motor power 16.5 kW, infinitely variable speed Ncodpshv A A Djfx Alnou - Grinding support for surface grinding, motor power 15 kW, infinitely variable speed - New electrical control system, based on SIEMENS S7, year of manufacture 2001 - New electrical control cabinet located nearby, year of manufacture 2001 - Infinitely variable grinding wheel speed on both grinding supports - Swiveling grinding spindle for guide rail and profile grinding - Control panel swiveling and height-adjustable - Coolant system located nearby - Hydraulic system located nearby - Oil circulation lubrication system located nearby - Various grinding wheels and arbors Space requirement (complete) L x W x H 11900 x 7700 x 4600 mm Weight 45 tons Very good condition

Condition: ready for operation (used), Year of construction: 1980, operating hours: 15,339 h, functionality: fully functional, grinding width: 2,650 mm, grinding length: 11,500 mm, table load: 10,000 kg, grinding height: 2,000 mm, grinding wheel diameter: 600 mm, The machine was retrofitted by the seller in 2020! The machine remained powered until 01.08.2025! TECHNICAL DETAILS Grinding Area: Maximum grinding width: 2,650 mm Maximum grinding length: 11,500 mm Maximum grinding height: 2,000 mm Maximum workpiece height: 2,120 mm Maximum distance between columns: 2,670 mm (by removing the guideways, a width of 2,750 mm can be achieved) Table size: 2,240 x 12,000 mm Maximum table load with even weight distribution: 10,000 kg/m Ncedpfxow I Ebue Alnju Travel and Adjustment Ranges: Cross slide travel: 1,800 mm Vertical adjustment of universal grinding support: 450 mm Vertical adjustment of grinding support with horizontal spindle: 250 mm Head inclination: ±90° Grinding Spindle: Wheel diameter: 600 mm Wheel width: 120 mm Wheel bore: 200 mm Wheel speed: 1,000 rpm Spindle power: 30 kW MACHINE DETAILS Control: Fanuc CNC 31i Model A Operating hours: 15,339 hours EQUIPMENT Enclosure without roof

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 2.4212.06, grinding width: 1,450 mm, workpiece weight (max.): 11,000 kg, grinding length: 3,000 mm, table width: 3,000 mm, table length: 1,250 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table and Workpiece Ncedpew Srzcefx Alneu Clamping area of the table: 3,000 x 1,250 mm Overall table size: 6,000 x 1,800 x 1,000 mm Clearance between columns: 1,650 mm Grinding length: 3,000 mm Grinding width: 1,450 mm Max. workpiece height: 1,250 mm Cross beam adjustment: 1,250 mm Max. workpiece weight: 11 t Table feed rate: 1 to 45 m/min Control System and Grinding Supports Universal grinding support: 7.5 kW Swiveling range of grinding spindle: +/- 110° Grinding wheels (universal support): 500 x 60 mm Vertical adjustment (universal support): 350 mm Peripheral grinding support: 22 kW Grinding wheels (peripheral support): 600 x 120 mm Vertical adjustment (peripheral support): 150 mm MACHINE DETAILS Electrical Data Total connected load: 40 kW Dimensions & Weight Weight: approx. 45 t Installation dimensions: 12,000 x 6,000 x 4,800 mm Note: The machine can be dismantled and loaded for €10,000.

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Nodpfx Aloxx Uudjnocu Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665100, overall weight: 4,700 kg, center height: 125 mm, Round grinding machine with robot! TECHNICAL DETAILS Center height: 125 mm MACHINE DETAILS Control: Fanuc 18i-T Total weight: 4,700 kg Operating hours Automatic cycle time (according to diagram): 41,411 h Feed time (according to diagram): 14,251 h Ncjdpfxszcwfuo Alneu EQUIPMENT Universal Robots UR5 robot Standard accessories 1 grinding wheel set, right-hand, 500 x 110 x 203.2 mm 1 manual swivel chuck for turning parts with manual indexing every 2.5 degrees Automatic balancing device MARPOSS type E 82 Hydraulic quill retraction for the tailstock Stroke monitoring for the tailstock Standard workpiece spindle MK 5 DIN 55026 size 5”

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Nodpfx Ajzcwfnslnscu Maximum width: 1,000 mm EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Dressing stop for internal grinding Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Ncodpjzd Rqlefx Alnou Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Including complete electrical system Permanent magnet plate Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 804, We offer this used Sumitomo NPG-2×1000 gear grinding machine, year of manufacture 1996. Model: NPG-2×1000 Serial number: 804 Manufacturing year: 1996 Nodpfxozgqzcs Alnecu Manufacturing month: 7 month If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, 2x grinding supports – swivelable 2x diamond surfacing cutters Magnetic clamping plate from SAV Njdpfx Alezhbaronjcu 2004 control system update R&D control system

Year of construction: 2016, operating hours: 16,568 h, condition: used, machine/vehicle number: 84037, Travel ranges (X/Y/Z): 800x500x400 mm, weight: 5,300 kg, with magnetic clamping plate, approximately 80x40 cm. Ncodpfszhaz Ijx Alnou

Condition: ready for operation (used), functionality: fully functional, Internal article number: 26068 Ncodpfx Alozhadvsnju Surface grinding machine ABA FF350 / 22 + Magnetic clamping plate (350 x 150) + Digital display on the Y-axis + Surfacing device + 3 grinding wheel flanges Grinding length: 350 mm Grinding width: 225 mm Workpiece height: max. 315 mm Table size: 350 x 150 mm Table longitudinal travel: 400 mm Table feed rate: 3-22 mm/min Total power consumption: 2.75 kW Dimensions (L x W x H): 190 x 190 x 185 cm (measured including the control cabinet + unit and coolant tank) Weight: approx. 800 kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Technical details grinding length 800 mm grinding width 400 mm workpiece height 375 mm weight of the machine ca. 3,5 t Additional information CNC Precision Surface and Profile Grinding Machine This machine is ideally suited for precision applications in tool and mold making. Technical Details: Grinding surface: 800 x 450 mm Grinding area: 800 x 400 x 375 mm Table load (max.): 700 kg X-axis = Longitudinal movement of worktable Table longitudinal stroke: 20 - 850 mm Table drive: Electromechanical with toothed belt drive Table speed: 5 - 35,000 mm/min Table setup: Electric handwheel and direction push button Nodpozg Udhjfx Alnjcu Y-axis = Vertical movement Distance from table to spindle center: 140 - 525 mm Vertical drive: Electromechanical with ball screw Vertical speed: 50 - 2,000 mm/min Vertical adjustment via electric handwheel and direction pushbuttons Minimum infeed 0.001 mm Measuring system: glass scale Z-axis = Transverse movement Maximum transverse travel 400 mm Drive type: electromechanical with ball screw Transverse speed 50 - 2000 mm/min Transverse travel adjustment via electric handwheel and direction pushbuttons Measuring system: glass scale C-axis = Grinding spindle Grinding spindle motor 7 kW Grinding spindle speed 1400 rpm Grinding wheel standard 300 x 50 x 76.2 mm Spindle bearing: Precision roller bearing Lubrication: Lifetime lubrication Connected load: approx. 19 kVA Total weight: 3500 kg Equipment: - Electro-permanent magnetic chuck Clamping surface 800 x 400 mm, Pole spacing 18 mm, with 16-stage holding force control and automatic Magnetic pole reversal for demagnetization - Leveling blocks For setting up and leveling the machine - Grinding wheels and two flanges - Partial enclosure Open at the top for loading with a sliding door - Dressing system Consisting of a holder for a prism arm or fork dresser Practicle arm for single-point diamond (MK O) or shaped diamond - Grinding spindle speed control Peripheral speed 10-32 m/s The peripheral speed of the grinding wheel is kept constant (V-constant control) with a 7 kW grinding spindle motor - Universal paper belt filter unit UPF 100 Tank capacity approx. 280 liters, Pump capacity 20 liters/minute at 1.5 bar - Air purifier Flow rate approx. 1000 m³/h - Compressed air ports For easier removal of large workpieces with a manual compressed air valve in the machine's work area. - Mobile balancing unit With optical operator guidance for dynamic balancing of the grinding wheel directly in the machine. Imbalance size and position are calculated automatically. With transport case. - Cleaning set Hand-held impulse nozzle for cleaning the work area - Documentation/Manual For sale is our reliably operating grinding machine from mold making. The machine was purchased new in 2016 and is in good technical condition, having been used for a maximum of 20 hours per week. It runs perfectly and is being sold solely due to an investment in a larger model.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head Ncjdpfx Alszg Twtenou to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Manufacturer: Schanbacher Type: S3-50 Year: 2012 Ncodpfx Alox Dbltonsu Dimensions: 460 × 600 × 1260 mm Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: ready for operation (used), - USED - SURFACE GRINDING MACHINE MAX GRINDING LENGTH: 1015 mm Nsdpfx Aljh St Dqenecu MAX GRINDING WIDTH: 405 mm MAX GRINDING HEIGTH: 350 mm MAGNETIC CHUCK: 400 x 1000 mm GRINDING WHEEL SIZE: 50 x 127 x 350 mm MOTOR POWER: 3,7 kW WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2000 mm ACCESSORIES: DRESSING TOOL

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Ncodpfx Asya Dagslnou Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Nsdpfeycpv Sex Alnocu Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Condition: used, Year of construction: 1998, machine/vehicle number: ECO6828/60-01, Machine control ASYST MS 400-, grinding wheel diameter 250 mm, max. grinding length approx. 1000 mm, with coolant device, fleece filter system and extraction unit. Ncjdpfx Aloy Sqh Asnou

Condition: used, Year of construction: 2004, machine/vehicle number: 7202, CNC control FANUC POWER MATE, workpiece conveyor belt, fleece filter system, and HYFRA cooling system Ncsdpfx Alsy Sqhvonou

Year of construction: 1989, condition: used, machine/vehicle number: 73903, comprising: KOENIG & BAUER rough grinding machine, year 1977, serial no. 73903 and KOENIG & BAUER finish grinding machine, year 1989, serial no. 720500007, with electric workpiece feeding and loading system, BEKA UPE central lubrication system Ncodjy Sqh Nspfx Alneu

Condition: used, Grinding wheel diameter 300 mm, max. grinding length approx. 600 mm, with coolant system and KNOLL fleece filter unit Nodpfx Aloy Sqkkenecu

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min Nodpfjwgnz Aox Alnjcu cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm Nedex Aq Egspfx Alnscu width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *