Used Crankshaft Grending Machine for sale (64,594)

Condition: excellent (used), CATALOGUE NUMBER: 6969 TECHNICAL DATA Circular saw: - max. saw blade diameter 300mm - spindle 30mm - max. cutting height 60mm - blade adjustable front/rear - motor 2.4kW Milling machine: Arbor: - spindle diameter 40mm - spindle working height 190mm - spindle locking - max. milling cutter diameter 360mm - motor 7.5kW - 2 types of rotation speeds - material clamping - side carriage adjustable up/down, front/rear - angle guide - retractable support from the table - manual carriage feed - dust extraction nozzle diameter 80mm, 160mm Bdedpjzw Dgmofx Amrjh - dimensions L/W/H 1910x1960x1800mm, - weight 830kg – Polish production – DTR documentation – upper control panel – used milling machine, very good condition Net price: 13900 PLN Net price: 3233 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 centrally electrically adjustable brush units with fine offset adjustment 1st brush: Metal brush, diameter 210 mm 2nd brush: Tynex brush, grit 80, diameter 210 mm Height adjustment: electric Height display: mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW Feed motor power: 0.37 kW Machine length: Machine width: Weight: Bdedpfx Amjxwnifjrjh

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Bdedpfx Ameug Ty Horsh Machine length: Machine width: Weight:

Condition: excellent (used), Year of construction: 2018, thread length: 120 mm, overall weight: 2,200 kg, total height: 1,800 mm, total length: 1,800 mm, total width: 1,300 mm, Treading machine PEE-WEE - P10CNC MACH-ID 9816 Make: PEE-WEE Type: P10CNC YOP: 2018 Roll set M14 x 1 PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 Left PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNF PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNJF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNJF PPS Ø 180 x 54 hole x 40 width 1 set universal linear guider 120 mm 1 set steady rest for to heavy workpiece 1 set HM support length 40 mm for 1/4, 5/16 and M14 Rolls 2 x cabinet with tool drawlers and work bench Miniumum pressure: 1T Maximum pressure: 10T Max. workpiece: 40Ø Bsdpfx Ajz Ha Hljmrjdh Min. workpiece: 3Ø Min. Threading lenght:20mm Max. Threading length:120mm Shaft Ø: 54mm Length: 1800mm Width: 1300mm Height: 1800mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Klever 1836 G FT CNC machining centre Description Technical data: Working field: X = 3811mm, Y = 1876mm, Z = 150mm Axes stroke: X = 4201mm, Y = 2016mm, Z = 260mm Maximum axes speed: X = 22.5m/min Y = 22.5m/min, Z = 12.5m/min Safety devices in conformity with the basic safety requirements of the regulation 2006/42/CE Presetting device for contact measurement of tool length with measuring plate diameter 80mm Automatic lubrication system Side rack toolchanger on machine's base frame - for HSK F63 or HSK F50 tools Toolchanger capacity: 10pos. Vacuum locking system - Klever 1836 G FT Work table with prearrangement for vacuum and electrical connection for vacuum pumps. Division of the table in 6 independent vacuum zones with automatic selection. 2 x 300 m3/h rotary claws vacuum pump BH 5 boring head can be equipped with up to 5 independent tools for single and multiple borings on panel's top surface. The head is composed of:· 5 independent vertical spindles with a pitch of 32 mm placed along X HSK F63 Electrospindle – 9.0 kW (12 Hp), air cooled in replacement of the one included in the base machine configuration - Inclusive of the 2 nozzles air blower Bedpfx Amjzqt Erorsdh - Inclusive of the electrical and pneumatic pre-arrangement for the BH5 boring head Pre arrangement for tool lubrication system Inclusive of: - X axis cable-holder chain closed version in replacement of the standard one included in the base machine configuration - Mechanical, electrical and pneumatic prearrangement for tool lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine BiesseNest (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: as good as new (ex-display), Year of construction: 2022, Belt width: 150 mm Belt length: 2400 mm Veneer sanding attachment: no Oscillation: yes Roller diameter: mm Sanding unit can be swiveled: yes / 90° - 0° Work table: 730 x 300 mm Bdsdohpmadjpfx Amrsh Extension table: 420 x 400 mm Belt speed: 14 m/s Dust extraction connection: 120 mm Motor power: 1.8 kW / 400V Machine length: 1480 mm Machine width: 680 mm Weight: 160 kg

Condition: excellent (used), Year of construction: 2024, Traverses X Y Z: 660mm x 406mm x 508mm, table size 762mm x 356mm, Bodpfx Ajz Hayromrodh 10000rpm spindle, 20 station ATC, DIN40 spindle taper, Hurco WINMAX 5 control, coolant, Swarf Auger

Condition: good (used), Year of construction: 2020, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 40 – 12000 rpm, Hurco Winmax 5 Control, Bsdpfx Asz Ha Ayomrsdh Spindle taper DIN40, 30 ATC, Coolant, Low volt light, Swarf Conveyor

Condition: used, Year of construction: 2016, operating hours: 6,700 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, controller manufacturer: Siemens, total length: 3,900 mm, total width: 2,550 mm, overall weight: 10,000 kg, coolant supply: 70 bar, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, Selling a used, universal machining center, Spinner U-1520, manufactured in 2016, from a training center with very few operating hours! Travel distances: Bjdpfx Aez Hcahomrjdh X: 1520 Y: 520 Z: 420 C: 360 degrees B: -5 degrees (-90 degrees) +115 degrees Equipment: Siemens 840D control with ShopMill Chip conveyor Blum tool measurement system Blum measuring probe Calibration mandrel IKZ 70 bar with paper band filter 12000 rpm spindle, SK40 Tool changer Swinging operation, 3-axis - 5-axis machining Compressed air for the spindle Enclosed work area Clamping surface 3-axis table: 920 x 540 mm Tilting round table: 650 mm diameter Accessories: Various tool holders, SK40 Machine feet 3D measuring probe Tool measurement system Machine is available immediately! We will handle the loading of the machine! Transport can be organized upon request.

Condition: used, Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1500 mm table-size 3200 x 1100 mm control TNC 430 B spindle turning speed range 60 - 4000 U/min spindle taper ISO 50 feeds mm/min table load 10 t milling drive 24 kW Center of spindle to wall or column 1229 mm total power requirement 50 kW weight of the machine ca. 22 t Bedpozrpnxsfx Amrodh dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Universal milling head is automatically swivable and turnable in 1,5° steps. Machine has a 20 position ATC, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and a mist cooling arrangement. Machine in program for 25.616 hours.

Condition: used, Year of construction: 1988, grinding length 0600 mm grinding width 250 mm workpiece height 250 mm magnetic plate size 600 x 250 mm Bjdpfx Aeu Rt E Tsmrsdh total power requirement 4,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2000 x 1200 x 1650 mm With magnetic plate 600 x 200 mm and automatic dressing arrangement.

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 1-13 mm arm length: 100 mm Bsdpfxez Hfl Ts Amrodh workpiece height max.: 400 mm total power requirement: 3 kW dimensions of the machine ca.: 2.0 x 1,2 x 2,2 m bore spindle turning speed range: 0-3000 U/min boring spindle drive: 2,2 kW max. Y-axis travel: 550 mm max. Z-axis travel: 300 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm *

Condition: excellent (used), Akbend ASM140 Bending Rolls 3 Rolls 140mm top roll 1250mm length x 5mm thickness Bodpfez Hdv Dsx Amrjdh Year 2007 Motor power 2.2kw

Condition: used, Year of construction: 2001, Order No. 20, Serial No. 184934, control system, manufacturer Arburg, closing force 1,000 kN, screw diameter 35 mm, handling system, conveyor, manufacturer colortronic. Bsdpez Hl Eyofx Amredh

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Bjdpfxeyrqpfs Amredh Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Bdjdpjwlbxlefx Amrsh Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: June 2026 Top condition, low operating hours (1540 hours of eroding time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional control unit Manual eroding with Powertec handheld EAGLE Powertec - fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High Speed Jump max. 18,000 mm/min Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Bedpeyzxd Dofx Amrsdh Accessories: Erowa, Type UPC Production Chuck CO2 fire extinguishing system September 30.

Condition: used, Year of construction: 1992, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 - Documentation available: No - CE certificate present: No - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 Bdjdpszwn Egsfx Amroh - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout - └ Type of digital readout: Sony 3-A - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Bdedpfxewwukxo Amreh Max. Travel distance X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows 10 control with new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light curtain areas, enabling pendulum operation A total of 8 material clamps Spindle in very good condition, spindle-in-draw force: 12.5 kN Protective fence removed, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Bdsdpfxexf E Two Amrjh Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2010, condition: like new (used), functionality: unexamined, machine/vehicle number: TUBE-MATIC-1200-CNC-3376, Equipment: 3rd hydraulic function, Unused SAFOP,ITALY Make Heavy Duty Bevelling Machine Upto 1200 MM ,CNC,Siemens Control,available for Sale IN Southern PArt Of INDIA fore an very Attractive Price. Bdsdpfxozrkwne Amreh

Condition: used, Year of construction: 2016, Control Heidenhain x-travel 800 mm y-travel 1.020 mm z-travel 1.020 mm Condition: Used The machine has been overhauled by GROB. Technical features & accessories: - HYFRA cooling unit - KNOLL KF-220 belt filter - KNOLL 750K-1 chip conveyor - TM218-9 tool magazine - SCHULER LMC900 automatic pallet loader - 10 pallet stations - Movable robot arm Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale. Bdodpfjz Hz Nhox Amroh

Condition: used, Year of construction: 2014, Control Heidenhain x-travel 1.000 mm y-travel 1.100 mm z-travel 1.040 mm tool taper HSK 63 number of tool places 338 Pos. Condition: Used Technical features & accessories: - TM218 tool changer - KNOLL FKA/750 cooling unit - KNOLL KF220 belt filter Bdodpfjz Hz N Isx Amreh - KNOLL 850K-1 chip conveyor Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: excellent (used), Year of construction: 1997, max. wheel diameter 820 mm gear width 300 mm max. module 8 min. module 0,5 clamping length 865 mm number of teeth 10 - 600 Bdedpfjz Hz Rlsx Amrsh max.helical angle +/- 30 ° turning speeds 1100 - 2150 U/min grinding wheel diameter 280 - 400 mm grinding wheel width 84 /104 workpiece weight max. 300 kg weight of the machine ca. 11,5 t dimensions of the machine ca. 6,0 x 4,8 x 2,9 m including Reishauer AF Filter, flanges, wheels,...

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Bdodpfsyy S Uasx Amreh Location: Available from stock, 54634 Bitburg - available immediately -