Used Copper Wire Drawing for sale (5,076)

Condition: used, Year of construction: 2012, Automatic wire threading, Travel range: x 600 mm y 400 mm Ppodpfx Aajzcdwwsheu z 310 mm Includes cooler Machine is in excellent condition.

Condition: used, Year of construction: 2013, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2013 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and Podpfx Aaozcdtxehepu

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Classic 2S Year of manufacture: 2004 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Podpfxjzcaxks Aahspu Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and fully overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Vertex 3F, Year of manufacture: 2007 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.03 – 0.33 mm (including fine wire module) Ppsdpfx Aszcap Aeahju Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Including AGIEJOGGER handheld control unit for convenient setup Including AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. You will receive a 6-month warranty on this! Includes user training at Techma on your overhauled machine. Optionally, we can also offer you the following services: - Transport - Commissioning - Training - Cooler

Condition: good (used), Year of construction: 1998, functionality: fully functional, Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 max. wire diameter 12 mm max. wire cross-section 115 mm max. ejector stroke 90 mm max. ejector on the punch side 20 mm Ppsdezd Da Hopfx Aahju Motor approx. 15 kW Power max. 160 pieces/min, depending on the part to be manufactured 3rd station: optional deburring or forming Press Biauli BF17B, year 1998, 13 tons Oil pans 424 kg Conveyor belt 199 kg Control cabinet 205 kg Platform 186 kg Machine parts/accessories 565 kg We sell the above items with exclusion of liability for defects in materials and workmanship and without any warranty on functions or their dimensional accuracy. No major defects are known to us, and the machine has functioned perfectly up to the present.

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS Ppodpfx Ajy Spl Hoaheu WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm Ppsdevuuikopfx Aaheu pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: excellent (used), Wire electrode, welding wire, stainless steel welding wire Pjdpecbkkasfx Aahepu -Net weight: 15 kg -Number: 1x package available -Weight complete: 15.6 kg

Condition: excellent (used), Year of construction: 2014, functionality: limited functionality, X-axis: 400 mm Pjdpfx Ajyvtbyeahspu Y-axis: 300 mm Z-axis: 220 mm The machine was in daily use until mid-April; however, the "automatic threading" function is not working.

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 Podpfx Aew N D Sueahepu distance of barbs: 50-150mm Excellant condition

Condition: good (used), Year of construction: 1980, Technical Details ; Wire Diameter - 1.2- 4,5 mm Nails lenght - 10- 150 mm Capacity - 800 kg/h List of equipment : 1x Wafios S150 2X Wafios S120 1x Kovopol THA 60 1X Kovopol THA 100 1X Moroni SPND 80 2x Nails polishing machine Wire Drawing Line SKET 5 Blocks Wire input - max. 6,0 mm Complete nail making plant in good working condition !! wire output - min. 2,5 mm Pjdpfx Ajvfc A Teahspu

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !! Ppjdpfxjuhxqme Aahsu

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Pedpfx Asn Ut A Ssahspu Voltage 400 Volt 50 Hz 30 Kw Production year: 1997

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Ppsdjmqk Tpspfx Aahou Year - 2017 Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw

Condition: used, Year of construction: 2008, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2008 Control : Sonstige Movement X/Y/Z : 550/350/400 mm Workingspace: Movement in X/Y/Z:550/350/400 mm Movement in U/V:550/350 mm Table size:900 x 600 mm Workpiece dimensions (max.):1.200 x 700 x 400 mm Load capacity (max.):1.500 kg Dielectricheight (min./max.):0/435 mm Clearance angle (max.):+/- 45°/400 mm Generator: Technology:ISOPULS-Doppelquellengenerator Cutting speed:400 mm²/min Finest arbitration:0,20 μm Ra Ppedezbzb Repfx Aahsu Wire: Standard diameter:0,25 mm Wire guiding:Closed diamond guides Equipment/Accessory: Tankcapacity:1.200l Dielektrikum Dielektrikumsmanagement I:Filtercartige Dielektrikumsmanagement II:Chiller, Eckert Setup operations:Electronic Handwheel Workpiececlamping:Clampingjaw, EROWA Further Accessory:Misc. Electrodeholder, clamping devices and Erodingwire : Attention:The displayed Deionisationsfilters are not included in our offer.

Year of construction: 2004, condition: excellent (used), Known K&S 8020 Specifications Specification Value Bonding type Automatic thermosonic ball bonder Wire material Gold wire (Au) Podpfx Aezdgm Deahopu Bond head Voice-coil direct-drive bond head Ultrasonic transducer 120 kHz unibody transducer with adaptive USG Vision system 20/20 vision system Camera Sony XC-75 CCD Bond pitch capability Sub-70 µm pitch kit available Bond area 2.0 × 2.3 in (≈ 50.8 × 58.4 mm) Optics Universal optics with increased depth of field Illumination LED Workholder 250-series heated manual workholder Power 208 V, 50/60 Hz Control Software-controlled automatic bonding programs Typical Process Capability The 8020 was developed to provide: Fine-pitch bonding Long, low wire loops Improved process control High throughput for leadframe and laminate packages Automated vision alignment and pattern recognition These capabilities were key selling points of the 8000 family. Applications Plastic IC packages SOIC, QFP, TSOP Memory devices ASICs Hybrid microelectronics Chip-on-board assemblies Physical Characteristics Unfortunately, a complete factory datasheet with dimensions, weight, XY-table resolution, bond-force range, and supported wire diameters is not readily available in public archives. Most of the available information comes from listings of used equipment and K&S annual reports. If you need details such as: Bond force range (grams) Wire diameter range (e.g., 0.7–2.0 mil) XY positioning resolution Air requirements Maintenance manual Error codes or calibration procedures

Condition: used, The K&S 8030 was a wire bonder, likely a specialized or less common variant. Based on the architecture of the 8000-series bonders, the typical specifications were approximately: Parameter Typical 8000-Series Capability Bonding method Thermosonic wire bonding Ppsdpfxjzdgl Hj Aahou Wire types Gold (Au), Aluminum (Al) depending on configuration Bond type Ball bonding or wedge bonding (model-dependent) Positioning Vision-assisted X-Y motion control Bonding area Typically 50–100 mm class work envelope Applications IC packaging, hybrids, chip-on-board, microelectronics Automation Programmable automatic bonding sequences

Condition: used, total length: 5,200 mm, total width: 2,700 mm, total height: 6,800 mm, overall weight: 110,000 kg, Renovated by Beck & Röhm in 1992,pressing force: 630 t,bolster area: 1730 × 2500 mm,number of T-slots: 8,ram stroke: 900 mm,installation height: 1550 mm,power requirement: 2 × 7.5 kW.Dismantling and loading costs are optional. If dismantling is carried out by the buyer, the corresponding costs will of course be reimbursed. Weight approx.: 110,000 kg Dimensions (LxWxH) approx.: 5200 x 2700 x 6800 mm Condition: unchecked Terms of payment: 100% prepayment before pick-up Ppodpfxjzdfzto Aahou Terms of delivery: Free loading on truck under power: No

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Year of manufacture: 2005 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from one side) Includes AGIEJOGGER handheld control box for convenient setup AGIE IPG high-performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg Ppsdpfx Aaogzv Scshou The machine will be completely overhauled and thoroughly tested by us. You will receive a 6-month warranty on the machine. We would also be happy to offer you commissioning and training.

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm Podpfxsm Amf Do Aahjpu travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2011 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel ranges: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged), 450 kg (non-submerged) Achievable surface finish: Ra: 0.20 µm Pedpfx Aaeywkuyehspu Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V Generator with Power Module AGIEVISION CNC control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and thoroughly overhauled after receipt of order. A test cut with optimal surface finish is then carried out for acceptance. You will receive a 6-month warranty for the machine. We are happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, GF CUT 2000X Year of manufacture: 2016 Travel distances: X= 350 mm, Y= 250 mm, Z= 256 mm U/V-axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm including Option KIT 50 Including automatic wire changer AWC Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand-held box for convenient setup Including AGIESETUP 3D Including glass scales for X and Y axes VISION 5 control unit 15" LCD color screen, membrane keyboard and mouse Including Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Pjdpsydk Skofx Aahepu Net weight: 3600 kg The machine will be completely overhauled and tested by us. An individual test cut is possible upon request. We also offer on-site commissioning and training for this machine.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be completely cleaned, overhauled, and thoroughly tested. Subsequently, a laser measurement of the axes will be performed at our facility. We would be happy to carry out an individual test on the CUT 3000 for you. Ppjdpfszbbmtjx Aaheu Includes operator training at Techma on your overhauled machine. Optionally, we offer you: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, AGIECUT Excellence 2F Year of manufacture: 2002 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Ppodpfezbbndox Aaheu Best achievable surface roughness: 0.1 µm Ra Max. cutting rate in cylindrical cutting: 300 mm²/min Available wire diameters: 0.07 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER hand box Includes AGIE-Setup 3D After receiving your order, the machine will be cleaned, inspected, and thoroughly tested by our technicians. We would also be happy to offer commissioning and training services.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece weight (max.): 35 kg, travel distance X-axis: 220 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 100 mm, High-precision wire erosion machine GF CUT 1000 Year of manufacture: 2014 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.07 mm to 0.20 mm Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handheld control unit for convenient machine setup 15" LCD color screen with jog shuttle and mouse AGIEVISION control system Ppjdpfx Aaozbbpnohou Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg After receiving the order, the machine will be cleaned, completely overhauled, and thoroughly tested by our specialists. We would be happy to commission the machine at your location and provide training on the control system and machine operation.