Used Combined Drawing for sale (5,445)

Condition: excellent (used), AGT Combination table saw and miter saw - Cutting width: 380mm - Cutting height: 85/40mm Nwedpfxoy Tmgke Ad Ssh - Weight: approx. 50kg - Tilting and swiveling

Condition: good (used), functionality: fully functional, Year of construction: 2000, Punching force, max.: 220 kN Sheet metal length: 2500 mm Sheet metal width: 1250 mm Laser power in watts: 3000 Sheet metal thickness: 8 mm Max. workpiece weight: 230 kg Machine weight, approx.: 23,000 kg Nwjdpfx Adjy Tl U Ho Ssh Operating hours: - Laser on-time: 87,583 h - Beam on-time: 13,564 h

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 2,400 mm, total width: 900 mm, total height: 1,400 mm, input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, Sausage portioning, joining and separating device VEMAG brand Model FSL 210 Year of production 2011 Power 6.2kW Voltage 400-460V 9A 3~50/60Hz Dimensions 2400x900x1400mm Portioning speed: 800 por./min Depending on housing, caliber and weight Portion length: From 55 mm - no limits, single cut From 40 mm - no limits, for 2 or more sausages Nsdpjvztrdjfx Ad Sewh Caliber: 13 - 40+ Types of casings: Natural, collagen and cellulose casings Casing length: up to 350 mm (collagen casing) FSL210 is a machine offering flexible and accurate portioning by length, joining and separating sausages in casings natural, collagen and cellulose casings.

Condition: used, Year of construction: 1981, max. wheel diameter 36 mm gear width 36 mm max. module 10 Nedpfx Asy S Ec Isd Sswh total power requirement 12 kW weight of the machine ca. 11,2 t

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame Nsdpfx Adjyupulo Sjwh - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Year of construction: 2026, condition: new, functionality: fully functional, Combined 3 in 1 : Welder / Generator / Compressor Triplex is multifunctional mobile power unit designed to provide 3 essential functions in a single compact machine : electrical power generator, welding capability and compressed air supply. Njdpozaaknefx Ad Sswh

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: CHA2500, Shipping costs are the responsibility of the buyer. Nwsdpfx Aey U D Ihed Ssh

Condition: good (used), Year of construction: 1995, functionality: fully functional, SCM Combination Planer/Thicknesser 2252 Year of manufacture: 1995 Manufacturer: SCM (Italy) S/N AB 44714 good condition, from a training facility Planing & thickness width 500–520 mm Planing table length     ~2000–2200 mm Cutterhead Ø 120 mm, 4 knives (HSS/TERSA) Motor power     5.5 kW (400 V) Thicknessing height   3 – ~235 mm Feed speed 5 – 17 m/min Table adjustment  manual (planing), electric with display (thicknessing) Extraction connection   Ø 120 mm The SCM 2252 is a robust combination machine ideal for craft applications. Cast iron tables, HSS cutterhead, stepless feed, motor-driven thicknessing table adjustment with display and mortising attachment make it a versatile work tool. Easy table adjustment for changing to thickness planing (spring assist) Planer part (planing function) Working width: approx. 500–520 mm Table length: about 2000–2200 mm Cutterhead: d = approx. 120 mm with 4 HSS knives Power: 5.5 kW (~7.5 HP) motor, 400 V Start: conventional "YA" start with motor brake Alignment & guidance: tiltable parallel fence (0° to 45°), mostly aluminum, length approx. 1100 × 170 mm Protection: Extraction hood (Ø approx. 120 mm) and CPS operator protection Tables: Cast iron tables, height adjustable manually Thickness planer part Working width: same range – 500–520 mm Height range: min. 3 mm to max. approx. 235–252 mm Table dimensions: approx. 500 × 930 mm to 550 × 320 mm implemented Table adjustment: electric, with display (e.g., SIKO, digital height display) Feed speeds: continuously adjustable between ~ 5 and 17 m/min or in steps like 7.5 / 15 m/min Nwodpfxswrcd No Ad Soh Extraction: usually also Ø 120 mm, often combined extraction option Machine features & dimensions Dimensions (L×W×H): around 2200 × 1000–1500 × 800–1000 mm Working height: approx. 800 mm Weight: 1050 kg

Condition: excellent (used), length ca. 3.200 mm width ca. 1.400 mm height ca, 1.600 mm Nedpfx Adjxwbpfs Sjwh Motors 2 table - swivable Ja The stable Bäuerle KFL combined woodworking machine combines a sliding table saw, slot drilling machine, and table router with feed in one machine and comes with a wide range of accessories. Roller table: yes

Condition: used, engine 3 KW cutting width tba mm roller table nein ja/nein Three-function combined table saw, slot drilling, and milling machine Kirchner Leipzig. Without milling arbor. Nwedpfx Adjwzbcvo Ssh

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Nodpfx Adefxyh Ro Sswh Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Njdpjfxygpefx Ad Sjwh Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH Nwedpfx Adofxyirs Seh demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: new, pressing force: 200 t, DURENDUS 200 T Deep Drawing Press – Double Column Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here was already built and delivered to a customer's order. We can manufacture a new machine of this model for you at short notice – including individual options tailored to your requirements. This is a hydraulic deep drawing press with integrated drawing cushion function designed for forming processes, drawing operations, and precise sheet metal processing. Base price: €76,000 net Options (upon request): The options listed are based on completed customer projects and allow targeted adaptation of the machine to your specific application. The basic version offers a functional standard configuration – in practice, it is usually enhanced with additional features and specifically configured to project requirements. * T-slots and holes to customer specification * Adaptation of stroke, installation height, and press force range * Extended drawing cushion configuration * Customized control modifications * Enhanced safety and monitoring systems ==== Technical Data + Information: ==== General Information * Design: Double column press * Press force: 40–200 t (adjustable) * Total weight: approx. 5,500 kg * Overall dimensions (W × D × H): 2,370 × 1,300 × 3,300 mm ==== Working Area * Table size: 900 × 900 mm * Ram area: 900 × 900 mm * Installation height: max. 800 mm ==== Table & Ram * Table height: 1,000 mm * Ram stroke: 0–500 mm (adjustable) * Column guide: 4 columns Ø 120 mm ==== Speeds * Pressing speed: 4–10 mm/s * Idle speed: 10 mm/s * Return speed: 16 mm/s * Drawing cushion speed: 20 mm/s ==== Hydraulics & Drive * Operating pressure: max. 260 bar * Pump capacity: 70 l/min * Servo motor power: 15 kW * Pressure accuracy: ±5 bar * Hydraulic system with air cooling and oil monitoring ==== Control & Operation * Two-hand operation * Mode selector switch (key switch) * Modes: setup, manual cycle * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 20 kW ==== Equipment * Drawing cushion: 30–80 t, stroke 200 mm * CE-compliant design * Safety limit switches Nsdpfjyzf A Hjx Ad Sswh * Hydraulic interlock * Control cabinet IP54 with brand components (SIEMENS, ALLEN BRADLEY, SICK) * Two-layer coating according to RAL colors ===== Deep drawing, sheet metal forming, forming technology, manufacture of drawn parts, series production, metalworking Deep drawing press, hydraulic press, double column press, drawing cushion press, forming press, sheet metal processing press Are you looking for a hydraulic press tailored to your application? Contact us for an individualized quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations.

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t stroke:900 mm Nedpfofh Izmjx Ad Sowh Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

Condition: new, Year of construction: 2024, For sale is a new Felder panel saw K540S with a cutting height of up to 140 mm. The machine is an exhibition unit in our showroom and is therefore as new (full warranty). Technical data: - Cutting height: 140 mm - Saw blade diameter: 300–400 mm - Motor: 5.5 kW / 7.5 HP - X-Roll sliding table, cutting length: 2800 mm Nwjdpfsy R N Apex Ad Sjh - Rip fence cutting width: 800 mm - Outrigger table: 1300 mm - Crosscut fence on outrigger: 2600 mm - 'Easy-Glide' tilt segment guide - CE-compliant overhead guard - 3x 400 V / 50 Hz The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: panel saw, sliding table saw, circular saw, table saw, woodworking machine, Felder Reference: R-A0117

Condition: excellent (used), Toolmax K310 multi-functional machine: saw, planer, router – 5-in-1 Nwodpoy Udvxefx Ad Soh Planer: width 31 cm, max height 195 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length 155 cm, 3 knives, adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 150 cm sliding table, adjustable fence, Saw: adjustable up-down and 0-45 degrees, 150 cm sliding table, guide rail on the side table, max blade diameter 250 mm Horizontal drilling machine: table adjustable up-down, front-back, and left-right, the machine has 3 motors, each 3 kW + a motor for the planer feed, power supply 380 V, used machine in very good condition, ready to work.

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Length:16000mm Width:6000mm Nsdjygu Smepfx Ad Sewh Height:6000mm

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m Nwsdpfoy Rutmsx Ad Seh height over floor 6,1 m YOM 1978 - overhaul 1997 with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m Nwedpfovuucqex Ad Seh year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: used, Year of construction: 1979, pressure 63 t stroke 200 mm throat 320 mm dayligth 450 mm table surface area 750 x 600 mm die cushion capacity 6,5 t die cushion stroke 80 mm die cushion area 240 mm table height over floor 800 mm ram surface 500 x 450 mm feed down 300 mm/s feed up 300 mm/s working feed 50 mm/s oil volume 380 l power requirement 12,0 kW Weight 6,5 t dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm SPECIAL DEAL as is where is Njdpfx Aoy Rur Asd Sswh WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1989, pressure 100 t stroke 560 mm throat 540 mm dayligth 800 mm table surface area 1000 x 1000 mm die cushion capacity 50 t die cushion stroke 200 mm Nedpfxjy Ruq Ss Ad Sswh die cushion area 710 x 650 mm table height over floor 910 mm ram surface 1000 x 1000 mm feed down 400 mm/s feed up 300 mm/s working feed 57,7 mm/s oil volume 650 l power requirement 37,5 kW Weight 15,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm AS SPARE PARTS DISPENSER

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 1125 mm stroke 250 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1100 x 900 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 100 mm die cushion area 700 x 400 mm table height over floor 960 mm side window 700 mm ram surface 1080 x 900 mm oil volume 1000 l power requirement 35,0 kW weight 23,0 t Dimensions (WxDxH) 2,5 x 2,3 x 4,5 m Nsdpfx Adeyx Il Ej Sjwh with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick), hydraulic drawing cushion in table, cutting impact cushioning No foundation pit necessary

Condition: used, Year of construction: 1984, pressure 200 t distance between columns 1800 mm stroke 710 mm Distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1600 x 1300 mm pressure of drawing cushion in table 80 t Nodjyx Ilropfx Ad Sewh stroke of drawing cushion in table 250 mm die cushion area 1400 x 1080 mm table height over floor 800 mm side window 800 mm ram surface 1660 x 1300 mm speed down 400 mm/s speed up 410 mm/s working speed 14,3 - 49,7 mm/s power requirement 38,0 + 13,0 kW weight 25,0 t Dimensions (WxDxH) 3,65 x 3,3 x 5,4 m height over floor 5,05 m height beneath floor 0,4 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning (in side frame), mechanical depth stop (motoric adjustable), mechanical ram interlocking, two-hand operation

Condition: used, Year of construction: 1980, pressure 400 t distance between columns 3250 mm distance table/ram, max. stroke up, adjustment up 1000 mm stroke 800 mm table surface area 3250 x 1400 mm table height over floor 1250 mm die cushion capacity 170 t die cushion stroke 200 mm die cushion area 1800 x 1000 mm distance between cutting impact cushioning 2610 mm side window 800 mm ram surface 3250 x 1400 mm return capacity 51 t speed down 300 mm/s speed up 300 mm/s working speed 16 - 33 mm/s quantity of oil 2900 l power requirement 100,0 kW weight 70,0 t Nwsdpfxjyx Ik Ue Ad Seh Dimensions (WxDxH) 4,9 x 3,1 x 7,6 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning with motoric adjustable depth stop, hydraulic ram interlocking, two-hand operation as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck