Used Nikmann Maschine for sale (1,395)

Condition: ready for operation (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: - Fine chippings 1-2mm - Fine chippings 2-4mm Ljdpfx Apjvw Urwsmshk - Chippings 4-8mm - Premix chippings/sand - Play sand 0-2mm - Washed sand 0-4mm - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm

Condition: used, Year of construction: 2009, functionality: fully functional, Kalmijer KGM biscuit machine with 2 biscuit rollers: Spekulatius and Kipfel. Comes with 10 baking trays. The machine has been overhauled. Stainless steel frame on castors. Equipped with heating for the rollers. Tray width: 25 cm; tray lengths: 1 m, 80 cm, and 60 cm. 16A connection. If you have any further questions, please contact us. Thank you in advance! Lhedpow T Rxcofx Apmjk

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 119,500.00!!!!! The machine is immediately available and NEW. Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating materials to be provided by the buyer. Lhsdpfxoztrkls Apmsk Commissioning and training by Milltronics: EUR 5,000.00 Leasing possible (subject to creditworthiness) Machine Details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automatic sequences • Custom macros available • Override potentiometers for axes and spindle • Spindle load monitoring • Key switch to lock EDIT function • Lights to indicate operating status • Additional “M” function with CNC wait channel • Constant cutting speed • Rigid tapping • Spindle speed 30 – 1,600 rpm • Spindle motor 18 / 11 kW, 2-stage electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 positions 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One tool holder for boring bars 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list and circuit diagrams in digital format • Operating manual and maintenance manual in digital format • Transformer for standard industrial power supply 400 volts, 3 phase • Lifting brackets for crane transport Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Travelling steady rest with brass pads, range 20 mm - 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: ready for operation (used), For sale is a drainage machine that is immediately ready for use. It can reach a depth of up to approximately 2 meters. The undercarriage still has at least 80% of its original capacity. It is pre-equipped for a Moba laser control system, but the system itself is not included. The machine is being sold due to the purchase of a new one. There are no technical defects. Lhedpfszkvd Djx Apmsk

Condition: used, Nikmann FS 41N planer and thicknesser - Planing width: 41 cm - Shaft with 4 knives - 2 table rollers Ledeya Drvspfx Apmohk - Motor with brake Machine in very good, excellent condition.

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: Lhsdpfjy Sub Hex Apmsk • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: used, Year of construction: 2006, operating hours: 9,831 h, functionality: limited functionality, machine/vehicle number: 1666105, mileage: 653,001 km, power: 291.26 kW (396.00 HP), overall weight: 26,000 kg, fuel type: diesel, maximum load weight: 8,820 kg, empty load weight: 17,180 kg, gearing type: semi-automatic, Equipment: ABS, air conditioning, cabin, differential lock, retarder, This offer concerns a complete drilling unit consisting of a truck with mixing plant, trailer, and drilling rig. The unit is only sold as a complete package with all equipment on board. Truck specifications: - Manufacturer: Mercedes-Benz - Model: Actros Lodpfxsxwk E Nj Apmohk - First registration: 13.06.2000 - VIN: WDB9502031K494582 - Mileage: 653,001 km - Operating hours: 11,631 h Trailer specifications: - Manufacturer: Blomenröhr - Type: Vehicle/Machine transporter - First registration: 26.04.2006 - VIN: W096882196GB34109 - Permissible gross weight: 19,000 kg Mixing plant specifications: - Manufacturer: Tracto-Technik - Type: MA 07-HP - Serial number: MA 08230572 - Year of manufacture: 2008 - Operating hours: 7,635 h Drilling rig specifications: - Manufacturer: Tracto-Technik - Type: Groundodrill 13X - Year of manufacture: 2003 - Serial number: DRI 03380061 If you have any questions, require further information, or need more pictures, please feel free to contact me.

Condition: good (used), Year of construction: 1996, 2 lines of ridgid box making machines with an extra lid-closing machine at the end of the 2 lines. Price is 12.500,- € for each line. Sold only as set. Ljdpfxji Dpb Uj Apmohk

Condition: used, We offer a board stacking machine. The stacker features a separating device and a powered roller table for pre-made packaging. More than half the width is in like-new condition, as only 120 cm wide boards have been stacked. Lhsdpfxoyh U I Ie Apmjk Machine width: 4.30 m Machine length: 7.50 m The entire system corresponds to the foto

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling range ● 2–5 ml Lhsdoyq Hgkspfx Apmek ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Rebar bending machine / Bending machine B 50 – exhibition model COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTO Ledpfx Apozvy S Nemjhk - CE marking - Incl. bending pins / stop / bending sleeves - Bending capacity max. 50 mm / diameter (single bar) - Foot switch - Complete documentation - Bending via program or individual bends Dimensions: L x W x H 1.3 x 0.9 x 1 meter / Weight 500 kg Errors and omissions excepted.

Condition: used, Year of construction: 2016, operating hours: 4,770 h, CAT 305.5E2 mini excavator, manufactured in 2016, with only 4,770 operating hours! ----* Manufacturer: CAT * Model: 305.5E2 * Year of manufacture: 2016 * Recorded operating hours: approx. 4,770 * Last service / inspection at approx. 4,469 operating hours! * Includes 1 x hydraulic trenching bucket * Includes 1 x deep digging bucket * Includes MS03 quick coupler * German machine, first owner * Good tracks * Video available upon request (WhatsApp Erik) * Price: EUR 28,900, net + 19% VAT Lhsdpfx Ajzt Uiwopmek ----For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, errors and prior sale excepted.

Condition: used, Year of construction: 2012, Air cushion machine, Fromm Airpad machine Manufacturer: Brüninghaus Type: AP 502 Year of manufacture: approx. 2012 Lodpfx Aswulylopmohk Film material: PA/PE composite film or Polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min. (depending on the film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions: (L x W x H) 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / special equipment: • Stored programs for different cushion sizes • Program change is activated by pressing a button • Cushions from 4 cm to 16 cm in length can be produced individually with a defined filling level • 10 programs are available for storing multiple parameters 22726ä

Condition: like new (used), Year of construction: 2025, operating hours: 120 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,000 rpm, feed rate X-axis: 25 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, spindle speed (min.): 140 rpm, Equipment: rotational speed infinitely variable, Our demonstration machines at a great price: MDX-60 milling and drilling center, travel range X-axis 6300 mm, and MDX 20, travel range X-axis 2050 mm. Efficient CNC technology for economical component machining. Why use expensive and complex CNC machines with complicated standard CNC controls for these parts, or continue to rely on manual, time-consuming processes such as marking, center punching, and drilling?  No CNC knowledge is required thanks to a user-friendly interface.  There is no easier-to-use CNC milling/drilling machine.  Even with just one hole, the machine is faster than manual operation.  Up to 80% time savings.  Graphical display of the programmed parts on a 21” screen.  Long parts can be fed through using a follow-up program.  Import of DXF and DSTV data directly from the CAD system.  High process and repeatability reliability. Lsdpfjzdb Nmsx Apmshk  Parts can be programmed after only a few minutes of instruction. Why make it complicated when it can be more efficient? The MDX center is a robust, clearly structured machine with minimal follow-up costs. An investment that pays for itself from the very first component. A cost-reducer for every metalworking company. Our great price for these demo machines, directly from us as the manufacturer in Bavaria: MDX 20: €63,500.00, including delivery MDX 60: €91,000.00, including delivery Validity: while supplies last. Arrange a demonstration appointment in Arnstorf or request our offer.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Ledpfxezizkyo Apmshk Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: ready for operation (used), Tool changer turret for DMC 63 V machine, 24 tool holders, Ø 74.5 cm, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Ljdjzu Hwvspfx Apmehk

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and production-ready. Ideal for automotive, aerospace, and general metalworking applications requiring precision 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed on inspection) Operating hours: 70,000 h total / 41,125 h beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale Lsdpfx Aeukhltopmshk We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 staff, 12 M€ revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose what fits your project: ModuleScope M1 – Ex WorksPick-up at our site, loaded onto your truck. Machine tested before handover.Buyers with own rigging and installation capacity. M2 – DeliveredM1 + international transport, insurance, and unloading at your facility (DAP/DDP on request).Buyers with internal installation team. M3 – Delivered & InstalledM2 + mechanical installation, utility connection, first power-up, laser alignment.Buyers without dedicated installation resources. M4 – TurnkeyM3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol.Buyers who want the machine producing from day one. On-site inspection and sample cuts on your own parts available at our facility in France prior to purchase.

Condition: new, Year of construction: 2026, CNC 1212INDUSTRY 2.0 6kW 1200x1200 milling machine with Becker KVT 3.140 vacuum pump The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200 x 1200 mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Technical data: Lsdjtu H Tuopfx Apmshk Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in free runs: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1200x1200x300mm - Hybrid table (vacuum + T-slot) Control: NK-105 G2 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650kg Dimensions: For transport - 220 / 190 / 220 Machine assembled and ready to work - 220 / 225 / 230 Standard equipment Hybrid table, i.e. vacuum table enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Central oil lubrication system for trolleys and guides as standard equipment Drive transmission is carried out via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: used, Year of construction: 2012, operating hours: 5,598 h, Bomag BW213PDH-4 roller from year 2012 with only 5,598 operating hours! ----* Manufacturer: Bomag * Model: BW213PDH-4 * Year of manufacture: 2012 * Recorded operating hours: approx. 5,598 * Operating weight: 13,100 KG * A/C – air conditioning * German machine * 119 kW * Deutz diesel engine * Additional photos and video available upon request * Price: €39,900 net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information provided without guarantee; errors and prior sale excepted. Lodpeyt Uirjfx Apmjhk

Condition: used, Leistung: 500-800 Fl./Std. Luftverkehr: 8 m3 Luftdruck: 6 bar Ledpox Itvzefx Apmehk

Condition: used, Year of construction: 2017, operating hours: 3,463 h, Equipment: all wheel drive, Magni RTH 5.18 Smart rotating telescopic handler, manufactured in 2017, with remote control! 2 units available! ----* Manufacturer: Magni * Type: RTH 5.18 Smart * Year of manufacture: 2017 * Operating hours: approx. 3,463 * Last service at approx. 3,426 operating hours! * Including load hook * Including remote control (radio controlled!) * Load capacity: 5,000 kg * Lifting height: approx. 18 meters * German machine, first owner * Good condition! * 100 kW * Deutz diesel engine * CE declaration and exemption permit available Lsdpoztzwbofx Apmjhk * Video available upon request * Price: 64,900 Euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is subject to change without notice. Errors and prior sale excepted.

Condition: used, Year of construction: 2016, operating hours: 9,852 h, CAT M318F mobile excavator, manufactured in 2016, with only 9,852 operating hours! ---- * Manufacturer: CAT * Model: M318F * Year of manufacture: 2016 * Recorded operating hours: approx. 9,852 * Last inspection at approx. 9,523 hours (06/2025) * German machine / 1st owner * Includes Liebherr Likufix SWA48 hydraulic quick coupler * Includes 1 x deep dig bucket * Good tires * Good overall condition Lhsdpfjyzld Dsx Apmek * Air conditioning * Central lubrication system * Power: 129.4 kW * CE documentation and data confirmation available * Price: 63,900 euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is subject to change without notice and does not constitute a guarantee. Errors and prior sale are reserved.

Condition: used, Year of construction: 2016, Equipment: all wheel drive, Liebherr L 538 Z 2plus1 Top condition, original paint Year of manufacture: 2016 VIN: VATZ1559KZB044515 Operating hours: 14,665 Machine handover on 19.01.2017 All services performed by Liebherr and documented. Last service at Liebherr on 20.06.2024 at 14,138 hours 4-cylinder inline engine, water-cooled with turbocharging Emission Stage IV, 155 HP Hydrostatic drive with 3-speed transmission, speed limited to 20 km/h, up to 40 km/h possible (currently 36 km/h) Air conditioning!!!! * Automatic central lubrication system (factory-installed by Liebherr) * Rear area monitoring with camera (function not tested!) * Ride control (boom suspension) * Steel lamp brackets instead of plastic * Fuel pre-filter * Climbing aid for easier cleaning of the front windscreen * Opening window in driver’s door * Premium touchscreen display * “Comfort” driver’s seat with pneumatic suspension (with seat heating) * Liebherr control lever (joystick) * Adjustable steering column * 4 working lights on the front cab roof * 2 working lights on the rear cab roof * Automatic bucket return * Reversible fan (for blowing out the radiator package) * Fluff filter in front of radiator package to prevent contamination * Pre-separator for engine intake air (TOP-AIR) * Beacon light preparation rear cab center * Audible reverse warning system (buzzer) * Radio preparation * Road approval possible!! Tyres 20.5 x 25 L3 – front axle 2 x 30% Tyres 20.5 x 25 L3 – rear axle 2 x 30% Net price with fixed 2.5 cubic meter bucket: €44,900 Available for extra charge: • Hydraulic quick coupler: €3,550 • High-volume bucket 4 cubic meters: €4,500 • Pallet fork 5 or 8 tons from €2,190 Available optionally with scale, e.g. used Pfreundt WK50 - WK60 scale from €3,900 All prices + 19% VAT or for export. Sale only to business customers or for export. Sold as seen, in as-is condition. No warranty or guarantee. The stated kilometer or operating hour readings are taken from the meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer; the information provided is not to be considered guaranteed features. The description and information are for general vehicle identification only and do not represent a warranty in the sense of purchase law. The information does not claim to be complete. The details/descriptions and images are non-binding and not guaranteed features. Only the specifications in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typing or data transmission errors. The seller has not inspected the machine. Equipment must be checked separately. Lhjdpfxoyqn Hre Apmek

Condition: used, Year of construction: 2017, operating hours: 3,379 h, Equipment: all wheel drive, Magni RTH 5.18 Smart rotating telescopic handler, manufactured in 2017, with remote control! ----* Manufacturer: Magni * Type: RTH 5.18 Smart * Year of manufacture: 2017 * Operating hours: approx. 3,379 * Last service at approx. 3,355 operating hours! * Includes pallet fork * Includes remote control (wireless!) * Lifting capacity: 5,000 KG * Lifting height: approx. 18 meters * German machine, 1st owner * Good condition! * 100 KW * Deutz diesel engine * CE declaration & exemption permit available Lhedpjzf T T Sefx Apmok * Video available on request * Price: 64,900 Euro, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee; errors and prior sale are reserved.

Condition: ready for operation (used), Motorized tool holder SK40 / SK50 from Zoller machine 6084 / H4000, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lsdpfx Aeztmkgspmjhk