Used Combined Drawing for sale (5,988)

Condition: used, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Gujdpfx Anozii Nqjgoh Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, I. General Description The storage system is designed for storing glass in crates or individual sheets in pull-out drawers. Each drawer is lined with rubber to protect the glass from damage. The design of the storage system allows for storing sheets with maximum dimensions of 3330 x 2250. The storage system has a bolted construction. II. Key Technical Data • Overall dimensions (length x width x height) – SKETCH • Maximum dimensions of stored glass: 2250 x 3300 • Number of drawers: 61 • Loading shelf width: 60 mm • Load capacity per drawer: 1300 kg • Incline: as per order • Paint color according to RAL: any – 7035 • Required personnel for operation: 1 person • It is possible to sell 2 separate storage systems, one with 30 drawers and the other with 31 drawers. Gujdpfxszgff Ns Angsh

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, solid construction with 8 drawers Gsdpfxszf Ehno Angsuh -Width: 420 mm -Depth: 625 mm -Height: 1350 mm -Drawers: See photos for layout/height -Door: lockable, without key -Weight: 74 kg

Condition: used, functionality: fully functional, mileage: 1,039,433 km, first registration: 05/2012, fuel type: diesel, overall weight: 260 kg, axle configuration: 3 axles, color: white, driver cabin: sleeper cab, suspension: air, Year of construction: 2012, Equipment: air conditioning, central locking, fog lights, onboard computer, power assisted steering, trailer coupling, IVECO STRALIS 260 S500, 3-axle tractor unit with center axle and tarpaulin, with aluminum rear doors + 2-axle center axle trailer with aluminum rear doors. Guodpfx Anjzk Dyaogeh

Condition: new, functionality: fully functional, Year of construction: 2026, color: other, overall weight: 12,000 kg, loading space width: 4,200 mm, loading space length: 13,000 mm, loading space height: 3,000 mm, Equipment: cooling unit, General Data: Model: Premium Mobile Home Type: Complete Container Solution External Dimensions: 13.0 m x 4.2 m (approx. 54.6 m²) Price Overview: Base Version: 83,000 EUR gross / 67,500 EUR net Full Equipment: 93,000 EUR gross / 75,500 EUR net VAT: plus 19% Technical Design: Dimensions & Weight: Weight: approx. 12 tons Gujdpfx Anszlq Tvsgeh External Height: approx. 275 cm Internal Height: approx. 225 cm A major advantage of this model is the high-quality insulation with 180 mm PU foam, making the house ideally suited for year-round use. The floor structure consists of a sturdy steel frame, a waterproof plywood panel, PU foam insulation, a wooden sub-structure, an OSB panel, and a high-quality vinyl floor. The roof structure comprises a combination of steel and wood, PU foam insulation, a vapor-permeable membrane, an OSB panel, and a durable aluminum roofing system. The interior of the roof is clad in wood, and a modern Fibo system is used in the bathroom. The walls consist of an external steel and wood structure with OSB, PU insulation, and wind and moisture protection. Inside, MDF cladding and additional sound insulation ensure a comfortable living environment. This is complemented by modern decorative elements. The facade is based on an aluminum facade system and is additionally coated with a high-quality vinyl coating (PVC). This provides a modern look in wood, stone or concrete appearance and is also easy to maintain, weather-resistant and durable. Windows & Doors: Of particular note is the large window front, approximately 3 meters wide, on the short side of the house, which provides plenty of daylight and significantly enhances the appearance of the living area. This is complemented by floor-to-ceiling glazing and further windows along the long side according to the floor plan. The entrance door is made of aluminum/glass with triple glazing, and the interior doors are made of PVC. Room Layout: The house features an open-plan living and dining area with a kitchen and direct access to the large glass front. In addition, there is a bedroom with a double bed and wardrobe, a guest room with single beds, and a bathroom with a shower, toilet, and sink. Equipment: The mobile home is delivered fully furnished according to the drawings. This includes, among other things, a fitted kitchen with all essential appliances, a dining table with chairs, a living area with a sofa and TV area, a double bed in the bedroom, and single beds in the guest room. Storage solutions are also integrated. Technology: The house is equipped with an air conditioning system (heating and cooling), a 3-phase electrical installation, and modern LED lighting in the interior and exterior. Additional Information: Delivery is turnkey, including furniture. Transport costs are calculated individually. On-site installation is not included in the price. Modifications are possible at any time. The offer is valid for 30 days. If you have any questions or would like to request changes, please do not hesitate to contact us. We look forward to hearing from you. Sebastian Witka Omega Container

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 7,000 mm, total height: 2,200 mm, total width: 2,350 mm, input voltage: 380 V, overall weight: 1,700 kg, compressed air connection: 6 bar, warranty duration: 12 months, film width: 250 mm, power: 5.2 kW (7.07 HP), product height (max.): 850 mm, product height (min.): 50 mm, product length (min.): 650 mm, EDDA Olympia 150s BN | Automatic "Total Closing" Bubble Wrap & Stretch Wrapping Machine The Olympia 150s BN is a premium, fully automatic horizontal orbital wrapping machine featuring the innovative Total Closing Series technology. Engineered specifically for the furniture, door, panel, and wood-processing industries, it combines Bubble Wrap (Air Bubble Film) and Stretch Film application in a single inline process to provide 360° total protection for high-value or fragile products. Advanced Total Closing & Dual-Layer Protection: Simultaneous Dual Coating: Applies a protective layer of bubble wrap followed immediately by an industrial stretch film layer, ensuring maximum cushioning against impacts and scratches. Complete 360° Sealing: Delivers a fully enclosed, airtight packaging result that safely protects products from dust, moisture, and transport damage. Optimized Material Efficiency: Precise mechanical/electronic tension control guarantees uniform wrapping while reducing film and bubble wrap consumption to the minimum. Premium Automation & High-End Components: Fully Automated Inline Cycle: Equipped with heavy-duty automatic film clamping, cutting, and welding units—completely removing manual operator dependency. Guodpfx Asy D Nzljngeh Integrated Motorized Conveyors: Features driven inlet and outlet conveyor belts that sync perfectly with your factory line for smooth product transit. Pneumatic Top Press Rollers: Adjustable pneumatic vertical hold-down rollers secure the product firmly during high-speed rotation, preventing shifts. Intuitive PLC Touch Screen: Allows instant setup of wrapping parameters, ring rotation speed, and custom overlap configurations via a user-friendly interface. Industrial Heavy-Duty Build: Engineered with a balanced ring mechanism and rigid frame for exceptionally quiet, low-vibration, continuous 24/7 operations. For exact ring diameter dimensions, layout drawings, customized technical inquiries, or detailed catalog pricing, please send us an inquiry directly through Machineseeker.

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Gusdpfx Ansy Hgxmjgjh Reference: R-D1618

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 13030301, Equipment: type plate available, We are offering a combined spray painting and drying booth MAXI RANGE 15-NOVA VERTA, which enables both painting and drying operations. The booth is capable of independent operation along its full length or separately in each of its two halves, independently from each other. Godjy Iamtepfx Angsuh

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, total height: 2,600 mm, total length: 12,200 mm, total width: 2,500 mm, overall weight: 13,000 kg, Combined Heat and Power Plant (CHP), Manufacturer: STIEGELE, housed in soundproof special containers, 800 kVA Manufacturer: Stiegele Year of manufacture: 2007 Operating hours: approx. 12,000 per engine Engines: Make: 2 x Scania DC 12-54, Variant A03P Engine speed approx. 1,500 rpm each Electric drive: EMK type KS160L-4-PTC Feed pump: Elektra type DD0705 Gedpfxsy Iu Hnj Angouh Mode of operation: Palm oil (primary), Diesel / Heating oil. The CHP was designed for operation with vegetable oil (palm oil) and has been converted accordingly. For continuous operation with heating oil or diesel, technical modifications may be required. Generators: Make: 2x Marelli Type: MJB315MA4 Output: 880 kVA Touch control: Manufacturer Woodward, Type GCP-30 Dimensions (per container): Length: approx. 12,200 mm Width: approx. 2,500 mm Height: approx. 2,600 mm Weight: approx. 13,000 kg The CHP system is modularly installed in two 40" soundproof containers and has been out of operation for some time. The sale includes the containers, control system, and heating oil tank. Viewing and inspection of the system is expressly encouraged. Sale exclusively to commercial customers. Any and all liability for material defects and warranties is excluded. The machine is sold used and as inspected, with no guarantee or assurance of specific properties. Claims for damages are only possible in cases of intent, gross negligence, or injury to life, body, or health.

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types Gjdpfsw N S E Ajx Angeuh - Interface for neutral data

Year of construction: 2025, condition: new, We manufacture new row cleaners according to customer requirements. Guedpfexrcyhsx Angoh

Condition: used, mileage: 3,000 km, power: 150 kW (203.94 HP), first registration: 03/2026, fuel type: electric, color: blue, number of seats: 5, Equipment: ABS, air conditioning, navigation system, * Ambient lighting, 30 colors * Armrests for front seats, on both sides * Windshield in heat-protection glass, with heating function * Lumbar support, pneumatically adjustable on both sides * Seat heating for both seats in the cab, with separate control on the left and right * App-Connect incl. App-Connect Wireless for Apple CarPlay and Android Auto * 9 speakers (5 speakers at the front and 4 speakers at the rear) * Digital radio reception (DAB+) * Mobile phone interface "Comfort" with inductive charging function * Navigation system "Discover Pro" * Anti-lock braking system (ABS) * Airbags for driver and front passenger, with front passenger airbag deactivation * Automatic Distance Control ACC "stop & go" with speed limiter * Anti-theft alarm system with interior monitoring, backup horn, and towing protection * Driver assistance system "Travel Assist" including lane keeping assist "Lane Assist" and "Emergency Assist" * Emergency brake assist "Front Assist" with pedestrian and cyclist detection * Automatically dimming interior rearview mirror * Proactive occupant protection system in conjunction with "Front Assist" * Power steering, electromechanical, speed-dependent * Rear view camera "Rear View" * Windshield wiper intermittent control with rain sensor * Lane change assist "Side Assist" * Traffic sign recognition * 11 kW AC charging power (alternating current) * USB-C interfaces * 4 light alloy wheels "Solna" 8 J x 20 at the front, with 10 J x 20 at the rear, in black, polished surface * Trailer hitch, foldable, with electrical release * Deletion of trim for the infotainment display, central control elements, and steering wheel from electric white to black * Assistance package "Plus" including area view "Area View" with rear view camera "Rear View" * Swerve support and turning assistant * Driver-side exterior mirror, convex; passenger-side exterior mirror, convex * Exterior mirrors, electrically adjustable, foldable, and heated, with passenger-side mirror lowering function * Three-point automatic safety belts in the front with belt and end-fitting tensioners and height adjustment * Dynamic high beam control "Dynamic Light Assist" for LED matrix headlights * Trim for the infotainment display and central control elements in black * Electric tailgate (opening and closing) with "Easy Open" and "Easy Close" function * Electric motor system output 150 kW; base engine: N06/N07 * Transmission for electric drive (1-speed) * IQ.LIGHT - LED matrix headlights with automatic headlight control, bad weather light, and welcome function * Climatronic air conditioning system "Air Care Climatronic" with active combination filter, stationary air conditioning, and 2-zone temperature control * Comfort seat on the left and right, in the 1st row of seats * Short wheelbase, short rear overhang * LED luggage compartment lighting * Light alloy wheels "Solna" 8 J x 20 at the front, 10 J x 20 at the rear, in black, polished surface * Headlamp range adjustment, dynamic, with dynamic cornering light * Memory function for "Park Assist Plus" parking assistant * Multifunction steering wheel in artificial leather, with touch operation, and heated * LED rear lights with dynamic turn signal * Parking assistant "Park Assist Plus" incl. parking assistance * Radio "Ready 2 Discover" with 30.48 cm (12") touch color display * Wheel bolts with extended anti-theft protection * Rear view camera "Rear View" as an alternative to the area view "Area View" in the "Plus" assistance pac Gujdpfxswz T Epo Angeh

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Gsdpfxsygu Smj Angouh Length:16000mm Width:6000mm Height:6000mm

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm Gedpeyn R D Iofx Angjuh ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: new, Year of construction: 2026, For sale is a high-quality Robland multi-combination machine. This unit integrates several woodworking functions in a compact and extremely robust design—ideal for workshops, joineries, or ambitious woodworkers. General Data: + Weight: 560 kg + Motor power: 3 kW (4 HP) Circular Saw: + Saw blade diameter: 250 mm + Speed: 4500 rpm + Max. cutting height: 85 mm + Swivel range: 90° – 45° + Sliding table: 1450 mm + Rip fence cutting width: 655 mm + Extraction ports: 100 mm + 60 mm Spindle Moulder: + Spindle diameter: 30 / 32 / 50 mm / 1¼" + Spindle speeds: 3000 – 6000 rpm + Max. tool diameter: 180 mm + Max. tool height: 120 mm + Travel: 140 mm + Tilting up to 90° + Optional tenoning hood up to 250 mm + Extraction port: 100 mm Gsdjy Nyquspfx Angeuh Planer & Thicknesser: + Cutter block diameter: 70 mm + Cutter block speed: 5500 rpm + Working width: 310 mm + Planer table: 1320 x 310 mm + Thicknessing height: up to 230 mm + Number of knives: 3 + Tersa cutter block + Planer knives: 310 x 25 x 3 mm + Feed speed: 6 m/min + Extraction port: 100 mm + Mortising unit (optional) + Drill chuck: 0 – 16 mm + Travel: 165 x 140 mm + Drilling depth: 85 mm Location: 39340 Haldensleben Price: €5,750 net

Condition: new, 8 St. range L-W-H 880 x 580 x 1000 mm weight 156 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. Gedpfx Anju Imf Isgjuh 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, 8 St. range L-W-H 710 x 510 x 900 mm weight 60 kg Drawer cabinet with 7 drawers Godpfx Asu Imimengjuh Drawer dimensions 600 x 435mm Drawer height: Load 1 - 7, 81mm Load 8, 173mm

Condition: new, range L-W-H 675 x 510 x 880 mm weight 56 kg 5 St. Professional tool trolley for workshop equipment. Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Inner dimensions of the lower drawer 56 x 43 x 17 cm. Dimensions of the wheels 100 x 30 mm. Guedpfx Aeu Immfsngsh

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting Gusdpfxou Dw I Ej Angoh On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: good (used), Year of construction: 1995, functionality: fully functional, SCM Combination Planer/Thicknesser 2252 Year of manufacture: 1995 Manufacturer: SCM (Italy) S/N AB 44714 good condition, from a training facility Planing & thickness width 500–520 mm Planing table length     ~2000–2200 mm Cutterhead Ø 120 mm, 4 knives (HSS/TERSA) Motor power     5.5 kW (400 V) Thicknessing height   3 – ~235 mm Feed speed 5 – 17 m/min Table adjustment  manual (planing), electric with display (thicknessing) Extraction connection   Ø 120 mm The SCM 2252 is a robust combination machine ideal for craft applications. Cast iron tables, HSS cutterhead, stepless feed, motor-driven thicknessing table adjustment with display and mortising attachment make it a versatile work tool. Easy table adjustment for changing to thickness planing (spring assist) Planer part (planing function) Working width: approx. 500–520 mm Table length: about 2000–2200 mm Cutterhead: d = approx. 120 mm with 4 HSS knives Power: 5.5 kW (~7.5 HP) motor, 400 V Start: conventional "YA" start with motor brake Alignment & guidance: tiltable parallel fence (0° to 45°), mostly aluminum, length approx. 1100 × 170 mm Protection: Extraction hood (Ø approx. 120 mm) and CPS operator protection Tables: Cast iron tables, height adjustable manually Thickness planer part Working width: same range – 500–520 mm Height range: min. 3 mm to max. approx. 235–252 mm Table dimensions: approx. 500 × 930 mm to 550 × 320 mm implemented Table adjustment: electric, with display (e.g., SIKO, digital height display) Godpfewrcd Njx Angeuh Feed speeds: continuously adjustable between ~ 5 and 17 m/min or in steps like 7.5 / 15 m/min Extraction: usually also Ø 120 mm, often combined extraction option Machine features & dimensions Dimensions (L×W×H): around 2200 × 1000–1500 × 800–1000 mm Working height: approx. 800 mm Weight: 1050 kg

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet. Drawer cabinet, sturdy design Gjdowrrl Nspfx Angsuh -6 drawers: layout/height see photos -lockable: without key -Dimensions: 630/750/H930 mm -Weight: 88 kg

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Godoz Irx Nopfx Angjuh Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options. Gjdpsz Ir Haofx Angjuh

Condition: used, Year of construction: 2011, Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data - Manufacturer: Krones - Model: AirCo - Year of manufacture: 2011 - Machine type: air conveyor, neck handling of empty PET bottles - Total conveyor length: approx. 60 m - Declining sections: 10 sections at 10°, approx. 16.8 m in total - Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right - Fan units: 7, each with filter housing - Diverter: 1 Conveyor sections In the order of the plant layout: - Fan unit - Straight section 3,500 mm - Straight section 500 mm - Curve 45° left, radius 750 mm - Straight section 400 mm - Straight section 2,000 mm - Straight section 2,000 mm - Fan unit - Straight section 2,000 mm - Straight section 1,000 mm - Straight section 400 mm - Straight section 300 mm - Curve 30° left, radius 750 mm - Straight section 2,000 mm - Straight section 600 mm - Straight section 400 mm - Curve 15° left, radius 750 mm - Straight section 1,500 mm - Straight section 600 mm - Straight section 500 mm - Fan unit - Straight section 1,500 mm - Curve 15° right, radius 750 mm - Straight section 2,000 mm - Straight section 500 mm - Straight section 600 mm - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Declining section 2,000 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Straight section 1,500 mm - Curve 90° left, radius 750 mm - Straight section 1,500 mm - Fan unit - Straight section 2,000 mm - Straight section 2,000 mm - Straight section 400 mm - Straight section 750 mm - Curve 90° right, radius 750 mm Gjdpfxjz I Tbrs Angsuh - Straight section 750 mm - Straight section 400 mm - Fan unit - Declining section 2,000 mm at 10° - Declining section 750 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,000 mm at 10° - Declining section 2,000 mm at 10° - Fan unit - Straight section 1,000 mm - Diverter - Curve 90° left, radius 750 mm - Fan unit - Straight section 2,000 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 1,500 mm - Straight section 720 mm Equipment - Stainless steel conveyor channels with neck guide rails - Stainless steel support stands and ceiling suspensions - Fan units with air filters - Sensors and pneumatic components along the conveyor - Plant layout drawing of the installation Condition Used, currently installed in the plant. The bottle unscrambler visible in some photos is not included. Dismantling and the exact scope of delivery are agreed during the offer stage. Availability Available immediately. Location: Germany.

Year of construction: 2014, condition: used, 1 unit of RATIONAL SCC WE 61 combination steam oven Gsdpfx Aez I N Emengouh Power: 16 A, Voltage: 400 V, Power consumption: 11 kW, including RATIONAL cleaning tablets and rinse aid Color: as shown in the pictures Year of manufacture: 2014 Dimensions (L/W/H): 85x78x82 cm Condition: used Location of the item: kitchen Payment method: prepayment by bank transfer Shipping: self-collection only from the location in Solnhofen