Used Cnc Lathe Control Cycle for sale (48,815)

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe Pgjdpeu Ix Izjfx Ahvsi with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 660 mm turning dia. over face-slide: 460 mm turning length: 1650 mm centre distance: ca. 2200 mm swing over bed: 660 mm Pedpeu Ix Nrsfx Ahvegi swing diameter over slide rest: 460 mm swing diameter: in Kröpfung: 960 mm centre height: 320 mm control: Siemens 828 D ShopTurn x-axis: ca. 350 (plan) mm spindle bore: Ø 105 mm range of revolution per miute: 26-224 / 225-670 / 671-2.000 stufenlos U/min feed continuous: X: 0,5 - 3.000 mm/min feed continuous: Z: 1 - 3.000 rapid traverse x + z axis: 6 m/min tailstock taper MT: MK 6 quill stroke: 300 mm total power requirement: ca. 23 kW dimension machine xH: 4,2 x 2,3 x 2,3 m dimension swarf conveyor LxWxH: 2,3 x 1,7 x 1,3 m Chip conveyor includes cooling water tank with pump 3-speed manual gearbox with electronic gear shifting Tool holder according to/with Silent Tool Technology equipped (Capto C6) Manual control unit Foot switch Control panel Hydraulics automatic door closing (pneumatic) Accessories see comparable in the photo. *

Condition: ready for operation (used), Year of construction: 2008, Year of manufacture: 2008 Control system: Fanuc Maximum length of the turning: 650 mm Max. turning diameter: 350 mm Spindle bore: 42 mm Maximum rotary speed of the spindle: 3500 1/min Length: 2400 mm Width: 1700 mm Height: 1500 mm Weight: 1800 kg Accessories/options: 3-jaws chuck lots of jaws collet type chuck collets steady faceplate Pgodsv Tpanepfx Ahvei Parat type tool holders Under power in our warehouse.

Condition: excellent (used), Steadies for lathe VDF BOEHRINGER Type: V 800 Psdpfxsyfny Uj Ahvsgi 1. Fixed steady 1. Travelling steady In very good condition.

Year of construction: 1993, condition: good (used), CNC lathe cycles Fabr.VDF BOEHRINGER type: DUC 560 BJ. 1993 with SIEMENS SINUMERIK 805T control. Turning length: 1000 mm Turning diameter over plan support: 365 mm Turning diameter above bed: 570 mm Spindle speeds: 3-2500U/min spindle motor: 19KW Spindle bore: 62 mm Chuck diameter: 315 mm Forkardt Turret head with 8 POS. VDI 30 Pgedpfod Ewaasx Ahvji With accessories and equipment documentation.

Condition: good (used), Year of construction: 1995, CNC cycle lathe MONFORTS KNC 6 year 1995 Control Monforts MTC K. Center distance : 2000 mm Max. turning diameter over bed : 630 mm Max. revolving diameter over plane support : 380 mm Spindle speed : 2 -1800 rpm Spindle motor : 21/15 Kw spindle bore : 71 mm 3-jaw chuck FORKARDT 400mm Tool holder Multifix size C with 3 tool pockets . Podpjhktd Nsfx Ahvsgi Space requirement : Length 4000 mm Width2200 mm Height 1900 mm Weight.ca: 5000 Kg Complete machine documentation available. Machine can be demonstrated under current.

Condition: used, Year of construction: 1999, Max. Turning length 6.020 mm centre height 550 mm centre distance 6.000 mm max. swing over bed 1.100 mm max. swing over facing slide 730 mm max. workpiece weight 6.000 kg Spindle diameter in forward position 178 mm faceplate diameter 1.000 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 140 mm max. chucking diameter 500 mm control WEILER Lathe - cycle-controlled | WEILER - E110 x 6000 equipped with a PARAT tool system as well as a chip conveyor. A comprehensive tool package, including several steady rests and a heavy-duty boring bar holder, is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time in the Swiss factory location. Pedpfx Aeydqqyohvogi Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-110 | E 110 | E110 x 6000 | E110x6000 | E 110 x 6.000

Condition: ready for operation (used), Year of construction: 2001, CNC Parallel Lathe with Teach-In Function Brand: GEMINIS Model: GHT4-720 Year: 2001 CNC Control: FAGOR 8055 TC Specifications: Max swing over bed: 720 mm Max swing over carriage: 470 mm Max turning length: 3,000 mm Spindle bore: 104 mm Spindle speeds: 0 to 1600 rpm Tailstock quill diameter: 100 mm (MT6) Tailstock quill stroke: 220 mm Main motor power: 17 kW Dimensions: 5800 x 2200 x 1800 mm (H) Weight: 5700 kg Equipped with: 3-jaw chuck dia. 400 mm 4-jaw chuck dia. 630 mm Steady rest dia. 200 mm (3-point) Steady rest dia. 400 mm (3-point) Follow rest Psdsyit Tzjpfx Ahvjgi Multifix C toolpost

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m Pgjdpfx Asu Sbkgjhvji

Condition: used, Year of construction: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI40 - Year of construction 2003 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm Pgodpfx Ahjuwrz Hovei - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 12 Nm - DC motor X-axis power: 4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2200 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Pgsdpfowmqx Dox Ahvoi

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Podpfxsxq Eyuj Ahvegi

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Psdpsua E Txefx Ahvsgi

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Podpfex Uq Uhjx Ahvsgi

Condition: ready for operation (used), Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible. Pgjdpfxev Amrto Ahvei

Condition: ready for operation (used), A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible. Pgsdpfxjxr Nvie Ahvei

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Pgodpfxswxfaao Ahvoi

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Pgodpfjyh Hg Njx Ahvoi Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Documentation and accessories Machine is powered up and available for inspection

Condition: good (used), Year of construction: 2012, functionality: unexamined, turning diameter over cross slide: 340 mm, spindle bore: 93 mm, turning length: 2,000 mm, turning diameter: 570 mm, turning diameter over bed slide: 570 mm, quill stroke: 180 mm, total length: 3,800 mm, total width: 2,100 mm, total height: 1,900 mm, overall weight: 4,500 kg, SEIGER SLZ-570 E x 2000 – CNC cycle lathe Robust German precision lathe with 2,000 mm centre distance and Siemens 840D control. Equipped with ZF two-speed gearbox, powerful AC main drive (20/25 kW) and large spindle bore of 93 mm including accessories. Sandvik Coromant Included in the scope of delivery are various tool holders and accessories, including: Sandvik Coromant tool holder / adapter Pgsdpfjyhnvbex Ahvoi Various holders for Multifix system Steadies / rests Additional accessories as per images

Condition: used, Year of construction: 2012, Technical details: turning diameter: 1800 mm turning length: 6000 mm Pgedpfxoyapp Hs Ahvei control: 840 circulation diameter via slide valve: 1140 mm Shift of the planing slide: 680 mm bed width: 1350 mm spindle head: DIN 55027 Gr. 15 spindle diameter in front bearing: 240 mm spindle bore: 110 mm speeds:: 3,55-710 1/min diameter of quill: 220 mm quill stroke: 350 mm Maximum torque at the spindle: ca. 21000 Nm feed power Z: 35000 N Feed force X: 25000 N Rapid traverse X: 4 m/min Rapid traverse Z: 4 m/min total power requirement: 55/70 kW dimensions of the machine ca.: ohne Verkleidung 13000x4200x2400 mm weight of the machine ca.: 34000 t

Condition: used, Year of construction: 2001, turning diameter 420 mm turning length 1200 mm Podpfx Ajh N D Unehvjgi control Fanuc bore diameter 60 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X1T126, spindle bore: 42 mm, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 3,500 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Max. turning length: 650 mm Max. turning diameter: 350 mm Spindle bore: 42 mm Max. spindle speed: 3,500 rpm MACHINE DETAILS Control system: Fanuc Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,500 mm Weight: 1,800 kg EQUIPMENT 3-jaw chuck Multiple jaws Collet chuck Pgjdpfxsyg Hvws Ahvei Collets Steady rest Faceplate Parat tool holder

Condition: new, functionality: fully functional, turning diameter over cross slide: 250 mm, spindle bore: 58 mm, turning length: 930 mm, turning diameter over bed slide: 460 mm, quill stroke: 127 mm, quill diameter: 68 mm, center height: 230 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, spindle speed (min.): 40 rpm, spindle speed (max.): 3,000 rpm, bed width: 300 mm, total length: 2,500 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 1,850 kg, torque: 1,012 Nm, travel distance X-axis: 210 mm, travel distance Z-axis: 800 mm, workpiece weight between centers: 350 g, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: rotational speed infinitely variable, Circumferential diameter over bed: 460 mm Center distance: 930 mm Max. speed range: 3000 rpm Spindle power (40/100% ED): 14/10 kW (AC drive) Max. Torque: 1012 Nm Pedju T Ippopfx Ahvjgi Spindle holder DIN 55029: Camlock D6 Spindle bore: 58 mm Including equipment a.o: - Siemens AC servo motors - Siemens supply and amplifier modules - Manual 3-stage gearbox - Multifix B type steel holder head - Processing area covered by 2 sliding doors and additional chuck protection for open operation - Chip tray can be pulled out to the front - Manual tailstock - Rotating center point - Coolant system

Condition: used, Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 530 mm, turning length: 600 mm, turning diameter: 450 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 670 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, bar passage: 75 mm, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, Affordable used equipment in good condition, available for inspection in D-49393 Lohne. Pedpfx Ahoyghaksvogi

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus Pgsdpfex U Encex Ahvji total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m