CNC lathe cycles

VDF BOEHRINGER DUC 560

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Workpiece weight with tailstock: max. 1000 kg Hedpev R Hamjfx Ahvoni Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Max. longitudinal feed rate (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Hnedporfw Nhefx Ahvji Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: new, Year of construction: 2026, warranty duration: 12 months, total height: 2,050 mm, total width: 1,350 mm, total length: 1,400 mm, overall weight: 580 kg, film width: 360 mm, product height (min.): 60 mm, product height (max.): 450 mm, product width (max.): 170 mm, product width (min.): 60 mm, filling weight (min.): 10 g, filling weight (max.): 200 g, air demand: 360 m³/h, Equipment: documentation/manual, The item is generally offered as project-based equipment or, depending on availability, as a demonstration machine. Manufacture bags in custom formats, fill them with your product, and seal them. Description - Excellent price-performance ratio - Easy to operate and clean - Low maintenance requirements - Made from rust-free stainless steel (1.4301) - Fully integrated control system within the packaging machine - Control via PLC with color touch display - Quick, tool-free format changeover Hnjdpeq Uld Uefx Ahvoi - One format included - Technical documentation provided via regional partners Technical Data - Intermittent heat sealing for heat-sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 140-360mm - Bag size (LxW): 40-250mm x 50-170mm - Output rate: 15-40 bags/min (depending on unit) - Accuracy: ± 0.5 - 1.5g - Weighing range: 3 - 200g - Power consumption: 3.7kW / 230V / 50Hz - Air consumption: max. 360 l/min at 6 bar - Dimensions (LxWxH): 1400mm x 1320mm x 2050mm - Weight: 580kg

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm Hedpfx Ahsf Ncadjvsni 2x machine cutting torch with cutting table

Condition: used, mileage: 129,408 km, power: 368 kW (500.34 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,620 mm, total width: 2,550 mm, total height: 3,850 mm, loading space length: 6,420 mm, loading space width: 2,540 mm, loading space height: 1,070 mm, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, power assisted steering, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Differential lock - Electric power steering - Remote central locking - Leather interior - Alloy wheels - Lift axle - Air suspension - Jaw-type coupling - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Remarks = HMF 5020 K6 6 x hydraulic extension. 5 x hydraulic outriggers. Scanreco radio remote control. Jib. K4 + 2 x manual extension. 4.70 m - 9,270 kg. 6.40 m - 6,460 kg. 8.30 m - 4,780 kg. 10.30 m - 3,700 kg. 12.30 m - 3,000 kg. 14.40 m - 2,500 kg. 16.70 m - 2,150 kg. Fly jib: Hydraulic reach: 26.50 m - 700 kg. Manual 28.70 m - 595 kg. 30.60 m - 490 kg. = Further Information = Technical Information Number of cylinders: 6 GVW: 35,500 kg Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tyre size: 385/55R22.5; Steered; Left tyre tread: 75%; Right tyre tread: 75% Rear axle 1: Tyre size: 275/70R22.5; Twin tyres; Left inner: 60%; Left outer: 60%; Right inner: 60%; Right outer: 60% Rear axle 2: Tyre size: 275/70R22.5; Twin tyres; Left inner: 60%; Left outer: 60%; Right inner: 60%; Right outer: 60% Rear axle 3: Tyre size: 355/50R22.5; Steered; Left tyre tread: 60%; Right tyre tread: 60% Functional Crane: HMF Interior Hodpjxfqdhjfx Ahvsni Upholstery: Leather Financial Information Price: On request Identification Type number: FM 500 8x4*4 / HMF 5020 K6 + JIB = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po russki. We make every effort to provide correct information, but no rights can be derived from the texts provided.

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,600 mm, Travel paths X-axis travel: 3500 mm Hjdpfx Aheyifpfovsni Y-axis travel: 2500 mm Z-axis travel: 1600 mm Worktable NC rotary table: 2200 x 1800 mm Max. table load: 12,000 kg Max. spindle speed: 2,500 rpm Tool holder ISO-50 Accessories: - Chip conveyor

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Hedpfsvr Eh Ejx Ahvjni Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Hjdpet Apugsfx Ahvjni Number of rollers: 2

Condition: like new (used), Year of construction: 2007, functionality: fully functional, TAKISAWA EX-122 CNC LATHE Category: CNC Turning Centers Reference No.: 311121 Capacity: Ø610 X 1524 MM Year of Construction: 2007 Technical Specification: CNC Control : Fanuc 21iT WORKING CAPACITY Max Turning Diameter : 610 mm Max Turning Length : 1524 mm Swing : 910 mm Guideways : LM Hjdpfx Ahox Ehhdeveni TURRET Turret : 10 Stations TAILSTOCK Tailstock : MT5 SPINDLE Max Rotation Speed : 1200 RPM Spindle Nose : A2-15 Spindle Bore : 200 mm Spindle Type : Gear Driven

Condition: good (used), turning length: 6,000 mm, spindle bore: 260 mm, Swing over bed Ø: 850mm Swing over cross slide Ø:500mm DBC Turning Length: 6000mm Spindle bore: 260mm Spindle power: 28kW Bed width: 650mm Stroke pinole: 300mm Spindle taper: 6Mk Workpiece weight: 5000 Length: 10000mm Width: 2100mm Height: 2600mm Weight: 12800kg Hedpfx Ahswvtg Aovoni