Lathe - cycle-controlled

WEILER PRIMUS VC

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, turning length: 500 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 30 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 30 rpm, Equipment: rotational speed infinitely variable, Distance between centers: 500 mm Center height: 140 mm Spindle bore: 40 mm Speed: 30 - 4000 rpm Weight: approx. 800 kg Dimensions: approx. 1430 x 935 x 1550 mm Accessories: Operating instructions, lamp, multi-fix holder, collet chuck (at extra cost) Iodpjvnr E Nofx Ah Noal Other accessories on request

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, Iaodswwtrbepfx Ah Njl 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: used, Year of construction: 1999, functionality: fully functional, Weiler Primus VC lathe, year 1999, equipped with a 3-axis Siemens digital readout, 3-jaw chuck, Multifix toolpost, rear splash guard, and electric chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by appointment. Iasdpfxox Afvgo Ah Nel

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard Isdpfow Idllex Ah Nsal About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Jungner Sweden Built in 1995 Accessories Iasdewdihrepfx Ah Nel

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Multifix tool holder, 24 longitudinal feeds, Iaedpfxsv Ifxis Ah Nel Metric thread, Inch thread,

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray Iodsv D Ip Nepfx Ah Nsal - Operating instructions - Used, as seen -

Condition: new, Discover our selection of robust and precise conventional lathes! Are you in search of a reliable lathe that boosts your productivity? Experience precision and performance with our new conventional lathes equipped with a wide range of accessories. Our machines offer turning diameters from 400-1000mm and turning lengths up to 10m, also available as a cycle variant. With various models, you have limitless possibilities. Some machines are quickly available from stock! Explore our extensive special accessories, such as hollow spindle, infinitely variable speeds, Siemens controls, and more, to make your lathe even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results. Trust in our long-standing experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here's a selection of STOCK MACHINES (see images), and we are happy to offer additional models or special machines upon request: Technical Main Data: DLZ Series including 15% or more BAFA subsidy! - Turning diameter over bed: 400-1000 mm - Turning length: 1000/1500/2000/3000 mm - Spindle bore: 80 (opt. 105) mm - Workpiece weight up to 2t Iedsd Afn Iepfx Ah Nsal - Spindle speed up to 2800 rpm Accessories: Digital display, 3-jaw chuck, faceplate, Multifix tool holder, and more. Extensive SPECIAL ACCESSORIES such as infinitely variable speed, steady rests, larger spindle bore, and more to make the machine even more productive. Currently available new machines with warranty and BAFA subsidy, for example: - SDM 850: Turning diameter over bed 850mm, turning length 3m - DLZ 325: Turning diameter over bed 650mm, turning length 2m and 3m - DLZ 250: Turning diameter over bed 500mm, turning length 1m and 1.5m - DLZ 200: Turning diameter over bed 400mm, turning length (missing information) More models (also with cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our service for you: - Consultation and solution finding at your location - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover - Financing and exploration of funding opportunities through KFW and BAFA, and more.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 864, center height: 140 mm, center width: 500 mm, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Digital display: Available Control: Siemens Sicomp IMC 05 Center height: 140 mm Center distance: 500 mm Clamping system Three-jaw chuck: Available Quick-change toolholder: Available Tailstock Type: Available Further information according to manufacturer - without guarantee Center distance: 500 mm Center height: 140 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 150 mm Iaodpfx Aev N Inijh Nel Main spindle Spindle head according to DIN ISO 702-3: Size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Inner taper depth of the main spindle: 50 mm Main drive Drive power (100% duty cycle): 4 kW Speed range: 30 - 4,000 rpm Number of Gears: 1 Number of speeds: continuously variable Feed drive Number of feeds: 24 Feed range longitudinal/transverse: 0.02 - 0.63 mm/rev / 0.006 - 0.2 mm/rev Threading range Metric threads: 0.25 - 8 mm Inch threads: 80 - 2 TPI Tailstock Quill diameter: 40 mm Quill stroke: 85 mm Quill taper mount: MT 3 Machine dimensions Length x width x height: 1,570 x 890 x 1,700 mm Weight: 1,050 kg

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Iaodpfsw Ebdbox Ah Nsl Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Iasdpfx Aowcldajh Nel Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos