Used Circular Shear for sale (2,950)

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Equipment and technical data: - With 45° tiltable saw blade - Sliding carriage and swivel arm - Machine table 700 x 680 mm - Height to table top approx. 900 mm - Height adjustment of circular saw blade approx. 55 mm - Max. circular saw blade diameter: 315 mm - Circular saw blade bore: 30 mm Bsdpfjy Ih R Hex Ak Eewl - Maximum cutting height with 315 mm saw blade: approx. 85 mm - Cutting width: approx. 400 mm - Maximum cutting length in front of the saw blade when using the sliding carriage: approx. 925 mm - Sliding carriage table size: 780 x 340 mm - Motor: 3 kW - 2870 rpm - Saw shaft speed: approx. 4600 rpm - Weight: approx. 216 kg Availability: short-term Location: 63934 Röllbach

Condition: used, cutting width 90°: 410 / 45°:290 mm Cutting height 170 mm Cutting height at 45° 115 mm Bjdsy Ihauepfx Ak Eewl saw blade diameter 420 mm machine weight ab. 150 kg Saw blade 40 mm saw blade turning speeds 3350 U/min

Condition: used, cutting width 90°: 410 / 45°:290 mm Cutting height 170 mm Cutting height at 45° 115 mm Bwjdpfx Akjy Ihahe Esl saw blade diameter 420 mm machine weight ab. 150 kg Saw blade 40 mm saw blade turning speeds 3350 U/min

Condition: good (used), Year of construction: 2001, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l Bwedpfx Aey Ig R Eek Esl voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good condition (!!) from a maintenance workshop Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front emergency stop button - Rear safety guard (protective grille) - original operating instructions

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm Bjdpfx Ajua Iulok Eswl cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2000 mm Bjdpfx Akjywzbdo Eswl -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

Condition: good (used), functionality: fully functional, Year of construction: 1996, Sheet width: 3050 mm Sheet thickness: 10 mm Control: Elgo 87 P2 Blade strokes: 11 - 31 strokes/min Cutting angle adjustment: 1 - 4° Number of hold-downs: 16 pcs Pressure per hold-down: 900 kg Bodpfoy H Inpsx Ak Ejwl Main motor power: 11 kW Table width: 700 mm Table height: 800 mm Dimensions (LxWxH): 4000 x 2220 x 1830 mm Weight: 6300 kg Accessories/Equipment: – digital length stop 10–1000 mm – upper and lower blade, two-piece, each 1550 mm – 1 set of spare blades – including low cart at the discharge side

Condition: good (used), functionality: fully functional, Year of construction: 2013, Sheet width: 3050 mm Sheet thickness: 10 mm Cutting angle: 1-4 ° Backgauge – adjustable: 10 - 1000 mm Number of hold-downs: 13 pcs Distance from lower blade to hold-down: 25 mm Hold-down diameter: 60 mm Oil volume: 240 l Max. strokes: 24 per min. Total power requirement: 15 kW Machine weight approx.: 6300 kg Space requirements approx.: 4100x3800x2000 mm Equipment: -Accessories: -Operating hours: 6,089 h -Angle gauge Bodpfx Akoy H Imrj Ejwl -3 material support arms -NC control Elgo -Automatic cutting angle adjustment -Electric backgauge 1000 mm -Foot pedal -Light curtain behind the machine -Cutting line illumination

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Bedpfxjydk Aco Ak Eewl Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used M Shear from Safan Model: M Shear 430 6 TS 200 Capacity: 4300 x 6 mm Automatic setting of cutting gap, cutting angle, and back gauge Equipped with pneumatic sheet support at the rear Return to sender feature Scrap container Bedpfx Aoy H D I Eok Ejwl Entry safety barrier

Condition: used, functionality: fully functional, Year of construction: 1988, Schechtl guillotine shear Bjdpfx Akjy I Uulj Eewl With signs of use, but operates flawlessly

Condition: excellent (used), Full automatic Bwsdpjy H Dmnsfx Ak Ejl Saw blade diameter 450 mm Cut range diameter 150 mm Cut off lenght 1000 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, functionality: fully functional, Year of construction: 1990, Mechanical guillotine shear Make: SCHRÖDER Model: MHSU 2000/1.5 Year of manufacture: 1990 Technical specifications Manufacturer: Schroeder Model: MHSU 2000/1.5 Year: 1990 Working length: 2020 mm Sheet thickness: 1.5 mm Dimensions: L 2.60 x W 1.65 x H 1.15 m Weight: 1.3 t Equipment Bwedpfxsy H Avbs Ak Esl • Motorized back gauge 750 mm with Elgo control • Support table • Foot pedal All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm Bwodjy I Rc Sopfx Ak Eol T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Profile Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material. Punch activation by hand lever, profile shear with foot pedal. Throat depth: 510 mm Press force: 60 tons Bodjy I Rc Eopfx Ak Ejwl Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punching diameter: 27 mm in 17 mm plate Punching diameter: 39 mm in 12 mm plate Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,000 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1993, Immediately available ex location: Hydraulic guillotine shear Steiner, type HTS 30 113, year of manufacture 1993. Controlled digital backgauge 1000 mm, light barriers. Cutting length 3200 mm, material thickness up to 13 mm, throat depth 300 mm, stroke 300 mm, drive 15 kW, weight 15 t. Price: EUR 7,500 excl. VAT ex location. Bedpjy I Rclefx Ak Ejwl

Condition: ready for operation (used), Year of construction: 1981, Immediately available ex works: Hydraulic guillotine shear Köllschen Model BSH 2000/12.5 Year of manufacture: 1981 Cutting length: 2050 mm Material thickness: up to 12.5 mm Motorized backgauge: 5 – 1000 mm Drive power: 15 kW Weight: 11 t Bwedpsy I Rb Usfx Ak Eol Price: EUR 3,000 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location: Lotze Guillotine Shear Type K 20 TS 2000 x 3 Year of manufacture: 1980 Cutting length: 2000 mm Material thickness: 3 mm Bwedoy I Rb Ispfx Ak Eol Drive: 5 kW Back gauge: 750 mm Weight: 3,200 kg Price: EUR 1,500 plus VAT, ex works

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, Kingsland COMPACT 45 Hydraulic Steel WorkeR LxWxH 1160 x 590 x 1410mm (+100mm lifting eye) Die Height From Floor 940mm Shear Support From Floor 940mm Angle Support from Floor 1140mm Notch Height from Floor 940mm Punching Capacity 22dia x 15mm Shearing Capacity 200x 15mm Angle Cutting 100 x 10mm Section Cutting 30mm Round, 25mm Square Bjdpfxjxawbij Ak Eswl Nitching 8mm Thickness Punch Pressure 45T Standard Size Fitment Punch & Die 18mm *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78996 Machine Serial Number: 450 230 03 Cost: £5,750.00 + VAT

Condition: like new (used), Year of construction: 2012, round bar steel 45 mm square edge steel 45 mm L-beam 120 x120 x 12 mm total power requirement 5,5 kW weight of the machine ca. 1600 kg dimensions of the machine ca. 1700 x 950 x 1900 m Bwodpfxoy Hxq Is Ak Ejl

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Bwjdpodzqnyjfx Ak Eel Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Bsdpfxjxqtvqe Ak Eewl

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear with a maximum of 40 operating hours, Cutting capacity: 3.5 mm sheet thickness, tensile strength 200 N, Cutting capacity: 2.5 mm sheet thickness, tensile strength 400 N, Cutting capacity: 1.65 mm sheet thickness, tensile strength 600 N (V2A), Used only for 1.5 mm coated sheets, Hold-down opening: 25 mm (can be reset to factory spec), Strokes per minute: 56, Bsdpfx Akoxal Uws Eowl Light barrier, Cutting angle: 2.4°, Upper blade has a 60° pointed grind for use with plastic-coated sheets. The upper blade is non-reversible. Rated power: 4.0 kVA Weight: 860 kg.

Condition: excellent (used), Year of construction: 2018, LARA CDCH-1400 SHEAR (year 2018) With discharge table. Hydraulic shear designed for cross-cutting strip material and managing scrap in coil feed lines. Supplied together with a discharge table, allowing for convenient and safe evacuation of cut material while maintaining a clean and continuous production process. Robust equipment with heavy-duty industrial construction, especially suited as an auxiliary component for cutting, stamping, or coil-feeding lines. Bwodpfx Aey Edlhjk Eel Main Features • Hydraulic cross-cut shear • Hydraulic drive • Robust design for continuous operation • Clean and precise cutting of metal strip • Integrated discharge table • Facilitates evacuation of scrap and off-cuts • Improves ergonomics and orderliness on the line • Keeps the work area clear • Heavy-duty industrial construction • Rigid and stable frame • Designed to be integrated at the same height as the LARA feeder/straightener • Easy integration into existing lines • Safety system • Integrated into the line control system • Designed in compliance with CE standards Work Materials • Carbon steel • Stainless steel • Aluminum and light alloys Main Technical Data • Maximum working width: up to 1,400 mm • Type of drive: hydraulic • Working pressure: 4–6 bar (pneumatic control system) • Power supply: 400 V / 50 Hz

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: PLC-controlled, Equipment: CE marking, documentation/manual, type plate available, Capacity: 4100 x 6 mm. Stroke: 120 mm. Control: DURMA DT-7. Serial No.: 608922260. Dimensions: 5230 x 3600 mm. Height: 2150 mm. Weight: 11,460 kg. Bedpfxsyrdfas Ak Eowl