Used Mitre Circular Saw for sale (8,543)

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 450 mm, total length: 1,300 mm, total width: 1,300 mm, total height: 1,500 mm, cutting range round steel at 90°: 100 mm, overall weight: 500 kg, length stop: 2,000 mm, power: 4 kW (5.44 HP), Circular saw for Aluminium, capacity Ø 3 - 100 mm, blade Ø 450 mm, mitre LH + RH 22° - 90° - 22°, motor 4 kw, speed 2800 rpm; options: vertikal clamping, air/oil mist lubrication, digitale mitre device, pression regulation device, rollers left side 3 meter with vertical rollers, measuring rollers right side brand AMAT 2 meter with back pulling device; dimension 130 x 130 x 150 cm, weight ca. 500 kgs Pgsdpfxoyxfxio Ahvji

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz Pgodpfxoquzd Rj Ahvoi - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Pgjdpfxedzp T De Ahvoi Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Psdpfedzp Snsx Ahvjgi Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Swivels both sides up to 45° - Saw blade tiltable to one side up to 45° for vertical mitre cuts - Motor: 2 kW, 400 volt, 2800 rpm - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Availability: short notice Location: 63934 Röllbach Podpfxoykvw Sj Ahvegi

Condition: ready for operation (used), A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible. Pgjdpfxewt Tkvj Ahvji

Condition: used, Transport 350 EUR Pgsdpfx Aswna Rxohvoi

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Pgodpjx Avtvjfx Ahvsi Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Podpfoww Nd Tsx Ahvjgi Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable right Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Pressure reducing valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Pgedpfx Ajvxr Thshvsi

Condition: used, Year of construction: 1986, incl. 2 saw blades d, good conditionmake Grauletype ZS 85 Nyear of manufacture 1986motor 2.2 kWcutting height approx. 85 mmcutting length approx. 380 mmblade diameter approx. 300 mmsaw blade bore approx. 40 mmswivel right up to 45°swivel left up to 45°tiltablemachine basefeed brakematerial system made of aluminum-steelnew price approx. 5.000,00 € with accessoriessuction connection D 80 mmweight approx. 150 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Pgsdpfx Ajvwfg Eohvoi

Condition: used, cleaned, partially refurbished, with new support plate Podpsw En Igofx Ahvjgi used, in good condition Manufacturer Graule Type ZS 85 N GS-certified Motor 2.5 kW 220 V Cutting height approx. 85 mm Cutting length approx. 350 mm Blade diameter approx. 300 mm Swivels right Swivels left Tiltable up to 45° Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in the actual condition as inspected, without any warranty or guarantee

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Podpfx Aotv Rgrshvogi Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: excellent (used), Fezer Crosscut and Mitre Saw The powerful solution for workshop and construction site for cutting wood, aluminium, and plastics Type: KG 25 AC motor 220 Volt, 0.85 kW 2800 rpm Indexing for mitre cuts Any intermediate position can be locked by clamping screw. For 250 mm saw blade Weight: approx. 24 kg Cutting capacity at 90 degrees: H = 50 mm / W = 120 mm Pgsdjyxx Evopfx Ahvei Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1979, Ulmia 1725 Precision Sliding Table Saw Precision miter cuts and fine joinery work. Saw blade adjustable in height and tilt. Saw blade swivels from 0-45 degrees according to scale and can be set precisely to the desired cutting height in any position. Tabletop with removable table insert and one guide groove each to the left and right of the saw blade. Slides longitudinally on ball-bearing segments in hardened and ground guide tracks, with return spring. Table size: 1100 x 700 mm Pgjdsyxx D Sopfx Ahvoi Minimum distance from saw spindle to top of table: 60 mm Saw blade height adjustment: 60 mm Max. saw blade diameter: 350 mm Max. cutting height: 115 mm Cutting width to the side of the blade (normal): 360 mm Saw blade bore: 30 mm Table travel (normal): 430 mm Saw spindle speed: 4,500 rpm Motor power: 2.2 kW Height to top edge of table: 880 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Pgodpfoxqtvqjx Ahvsi

Condition: ready for operation (used), Machine is disconected from power. Pgedjhva I Iopfx Ahvei

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Pgsdpfx Ahew Sadrovji

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V Pgodpfxjc Snvfj Ahvei weight: 14,5 kg

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm Pgedpfjywtr Usx Ahvji - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke – Used saw in perfect condition Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7937 Pedpfx Aoywtptehvogi TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° cutting width 95 × 60 mm Motor output 1,3 kW bis 1,8 kW kW Saw blade diameter 315 mm Dimensions (L/W/H) 1100x900x1450 mm Podpfx Aheywnvnevsgi machine weight ab. 230 kg

Condition: used, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 200x80 mm Cutting area at 45 degrees left: round 115 mm 150x80 mm Cutting range at 45 degrees right: square 115 mm Cutting range at 45 degrees right: flat 150x80 mm saw blade diameter 350 mm Vice opening 200 mm dimensions 1100x1000x1700 mm Psdpoywnvhsfx Ahvjgi weight 300 kg

Condition: new, HSS circular saw blades for steel machining with some secondary holes: Psdpfx Aec R Tyqjhvjgi 315 x 2.5 x 32 mm, 90 Z 315 x 2.5 x 32 mm, 98 Z 225 x 1.9 x 32, 90 Z

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm curring height: 77 mm Pgsdpfx Aeb H Infehvei saw blade rotations: 6300 rpm electric drive: 380 V, 2,2 kW space needed: 800 x 680 x 840 mm