Used Circular Shear for sale (2,951)

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction Unit MG 3 ST Circular Saw Fully Automatic PROFILMA 502 1 69,430.00 69,430.00 Ppedey Dtpmspfx Ak Der Fully automatic operation, drive 7.5 kW, S6, 400 V, 50 Hz, 2850 RPM. For use with saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm, Siemens S7 control system with touch display including piece counter. Including CPU 315 and Flexisoft, piece count multiplier for bundle cutting operations. Cycle time indicated in seconds, chain dimension, including reversing device for section lengths up to 4 m max. Automatic shut-off via limit switch at end of workpiece, error diagnostics, including IXON router for VPN connection, see datasheet. Motorized saw blade feed, continuously adjustable, vertical and horizontal clamping from below upwards, feed and discharge side at the saw head, cutting gap expansion on both sides of the saw blade. Electronic material feed unit, 800 mm feed length, with ball screw and servomotor, including pneumatic horizontal and vertical clamping device. The profile support area in the feed section is equipped with a liftable/lowerable roller, remnant piece from 75 mm, depending on profile. Clamping pressure reduction horizontal and vertical with 6 pressure regulators, timed spray device with fill level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame internally lined with sound insulation mats. 2 extraction ports Ø 100 mm, safety guard above the saw head and feed unit, 740 mm roller conveyor with reach-in protection on the infeed side, 450 mm Pertinax table plate with reach-in protection on the discharge side. Chip Extraction Unit MG 3 Dust and chips are collected in a 172-liter metal container, which is detachable for easy emptying. 2 outlets with 100 mm hose adapters, without extraction hose, drive 3.0 kW, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M, maximum noise level 80 dB(A). Selector switch for continuous operation or operation controlled by the saw, without power cable, paint finish: RAL 7035 / 9016.

Condition: excellent (used), functionality: fully functional, Engine power 2.2 KW Ppjdpfx Akewbpwho Der Manual aggregate movement Disc diameter 330 mm 3000 rpm Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Starting the cutting process with a pedal Safety switch Width 900 mm, height 1500 mm

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand Psdpfx Akoyq Szmo Dspr - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions

Condition: used, length ~ 600 mm width ~ 700 mm height ~ 1.000 mm saw-blade dia. max. ~ 300 mm Sharpening machine cut-off saw for sharpening small circular saw blades. Ppedpfx Akoulffte Djr

Condition: used, Year of construction: 1983, sheet width 3050 mm plate thickness 6,0 mm distance between columns 3000 mm cutting angle 0,5 - 3 ° no. of strokes 9 / 14 Hub/min Ppedpfx Aovxlpiek Djr down holder 18 total power requirement 10 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 3750 x 1600 x 1650 mm Features: - Hydraulic / slide-guided sheet metal guillotine shears - Electric backgauge 10-750 mm - Electric cutting angle adjustment - Manual cutting gap adjustment - 1x side stop - Front finger guard - Foot switch

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Podpfstp I S Aox Ak Dspr

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 23708, power: 7.5 kW (10.20 HP), HACO TS 3006 Atlantic - Working length: 3050 mm - Mild steel capacity: 6 mm (400N/mm2) - Min. cutting angle: 0.5° - Max. cutting angle: 3.0° - Number of hold-downs: 18 - Strokes per minute at smallest angle: 14 - Strokes per minute at largest angle: 8 - Working height: 770 mm - Motor power: 7.5 kW Ppedpfx Akoy Dpzfe Der - Total length: 3800 mm - Total height: 1750 mm - Total width without CE guard: 1650 mm - Total width with CE guard: 2700 mm - Control: SP9 Robosoft - Weight approx. 4500 kg

Condition: used, total length: 2,500 mm, total width: 1,700 mm, total height: 1,500 mm, Weight: 2.050 kg - Documentation available: Yes - CE certificate present: No - Serial number: 14/9 - Drive system: Conventional - Drive type: Mechanical Pedpoyzp A Refx Ak Dspr - Configuration: Swing-beam - Power [kW]: 5.5 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 2040 - Cutting speed [mm/min]: 50 - Throat depth [mm]: 100 - Backgauge depth [mm]: 550 - Angle adjustment: Manual - Transport dimensions: 2500mm x 1700mm x 1500mm (l x w x h) - Transport weight [kg]: 2050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2005, sheet width 3050 mm plate thickness 16 mm distance between columns 3100 mm no. of strokes 16 Hub/min back stop - adjustable 10 - 1000 mm cutting angle 0,5 - 2,5 ° down holder 13 Stück oil volume 300 l Podpoyzi Nwsfx Ak Dopr total power requirement 22 kW weight 14000 kg dimensions 4100 x 2300 x 2000 mm Features: - Electro-hydraulic slide-guided sheet metal shear - With ELGO P9724 NC digital control unit * Input of target/actual values from the backgauge possible * Digital display - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Front finger guard - 1x sturdy side stop, with T-slot & mm scale - 3x front support arms - Hydraulic sheet metal hold-down - 2x emergency stop buttons at the front - Rear safety guard (protective grille) - Original operating manual * Special accessories included: - Backgauge system conveyor belt * with pneumatic sheet metal holding device * Conveyor belt with pneumatic scrap diverter * Return to Sender (sheet metal discharge to the operator)

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 6 mm rear stop 1000 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9-17 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3800 x 2000 x 1600 mm weight 4500 kg Equipment: - electric backgauge - electric cutting angle adjustment - manual cutting gap adjustment - SP 9 control unit Ppjdpoyrhvvjfx Ak Der - Safety guard behind the machine incl. light barrier - front finger guard - 1x side stop - operating instructions

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6 mm rear stop 10 - 750 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9 / 14 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3750 x 1600 x 2450 mm weight 4800 kg Features: - Electro-hydraulic, slide-guided sheet metal guillotine shears - Front control panel, front left Ppedpfxew S Nkne Ak Djr - With electro-hydraulic cutting angle adjustment - With manual cutting gap adjustment, from the front (eccentric) - Electric motor rear stop 10-750 mm (ball screws) - With analog position display + hand wheel for fine adjustment - 1x side stop - 3x support arms - 1x freely movable foot switch - Front finger guard - Operating instructions (PDF)

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° down holder 14 Stk no. of strokes 18 Hub/min oil volume 150 l total power requirement 11 kW dimensions of the machine ca. 3900 x 1900 x 1600 mm weight 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch Pedevuz Tpjpfx Ak Depr - Operating instructions

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm Ppedpfx Aoy Ddv Rok Der - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: like new (used), 2 unused blades for guillotine shear to standard quality → sold as used. Length = 3150 mm Width 1 = 66.5 mm Width 2 = 68.5 mm Ppodpoy Dcwgjfx Ak Djr Thickness = 19 mm Through holes, D = 10 mm All further data can be found in the attached drawing.

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Psdpsy Dcmbsfx Ak Dopr Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used Safan guillotine shear with discharge unit Ppsdpfjyzgdrox Ak Dsr Type VS 430 3 Capacity: 4300 x 3 mm Electrically adjustable back gauge Manually adjustable cutting angle and blade gap Equipped with lift/discharge device at the rear

Condition: good (used), functionality: fully functional, Year of construction: 2001, Neatly used Safan guillotine shear Pedpfx Aoyzgcujk Dspr Type HT 310 4 (M Shear) Capacity: 3100 x 4 mm Adjustable backgauge, cutting angle, and blade gap Includes Theis stacking unit

Condition: used, Esterer DKV double edger Psdpfx Akjy Da Iie Depr Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws with roller infeed with lath head with sliver separator with drive motor (45 kW) with control cabinet with saw blades Location: Germany, near Lake Chiemsee

Condition: used, Trimming saw Esterer DKE Passage width: 600 mm Passage height: 160 mm with 22 kW drive motor including spare saw blades Pedpfxsy Da Hfe Ak Djpr including spare templates Location: Germany, near Chiemsee

Condition: good (used), Year of construction: 1993, Used Darley guillotine shear Ppsdoyzf Snopfx Ak Dor Type VS 6008 Capacity 6050 x 8 mm Machine fully operational, frame needs to be welded (see last photo)

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy format circular saw with scoring unit and Siemens three-axis control Hanging control panel with Siemens control and 10" touch display Control of the saw blade height/inclination and positioning of the parallel stop via the control panel Pjdpfx Ajvmfawek Djpr Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 min¯¹ High weight ensures vibration-free operation Large outrigger table with material roll Extendable aluminum longitudinal stop with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood conveniently operated using a gas pressure spring can be swiveled up Saw blade clamped via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. It is new and in an unused condition. We are happy to help with transport, assembly and instruction.

Condition: used, functionality: fully functional, Year of construction: 2008, Used Darley guillotine shear Type GS 4113 CL Ppodpfx Ajyzf Eusk Djr Capacity 4050 x 13 mm Year of manufacture 2008

Condition: good (used), functionality: fully functional, Year of construction: 2008, Used 4-meter guillotine shear by Darley Model: GS 4113 CL Pjdpfeyzd Ihsx Ak Depr Capacity: 4100 x 113 mm Delem DAC 350 CNC control CNC backgauge High support table Year of construction: 2008

Condition: new, - NEW - Concept 350 ELITE Partnership Edition - Cutting length 3200 mm - General Features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam, incl. LED lighting with 3 different indicator colors: WHITE: Machine in standby RED: Pressure beam lowering or emergency stop function BLUE: Saw unit in operation - Variable support table, 1,000 x 500 mm - Scoring system via main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, incl.: Saw blade holder, template holder, emergency stop button, start button, selector switch for grooving / scoring / sawing, feed speed rotary switch, switch for laser (option), and USB socket Partnership Edition includes: - Motorised rip fence with 4 aluminium stops, synchronized traversing All 4 stops travel up to 1,300 mm. Table length approx. 2,000 mm. - Windows 10 display control (10" touchscreen). The graphical interface offers the following functions: Tool database, mitre cut calculation at the length stop, Cutting plans can be created and saved, programs can be stored, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm, including 2 digital displays Technical Specifications: - Max. saw blade projection: 350 mm - Saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade diameter: 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm - Order No.: FIMAL379 Ppodpfx Akjwzmvbo Der Including: - Motorised rip fence with 4 aluminium stops, traversing up to 2,100 mm instead of 1,300 mm. Order No.: 47/17 - Cutting line laser Order No.: 3410451 - Saw motor with 7.5 kW (10 HP) incl. automatic star-delta start Order No.: Programmable saw blade height adjustment incl. height correction when tilting the saw unit Optional accessories at extra cost: - Mitre stop +/- 50° tiltable with length compensation Order No.: 3380132 including telescopic stop and folding stop

Condition: used, functionality: fully functional, sheet thickness (max.): 4 mm, GASPARINI SHEAR 3000 X 3 WITH SHEET SUPPORT MOTORIZED BACK GAUGE USED, WORKING MACHINE INTERNAL CODE SVR 406 Pedpey A Snljfx Ak Djpr