Used Circular Vibrator for sale (3,709)

Year of construction: 1987, condition: used, One Rösler R 300 A/SA-KP and one R 300 RT are available, year of manufacture: 1986/ 1987, 1) R 300 A/SA-KP, connected load: 4.5kW, weight: 830kg, 2) R 300 RT, connected load: 19kW, weight: 2,130kg, with documentation. An on-site inspection is possible. Csdpfxozuzy Eo Albsrg

Condition: like new (used), OVERHAULED “GFT KSS-24/70-2-2018 .” for Sale Also many other manufacturers like: ThyssenKrupp / BOA / Metso / Allis-Chalmers / Skett / Siebtechnik Find our complete stock on our website. Manufacturer: GFT Type: 24/70-2-2018 Size: 2.400mm x 7.000mm Crsdpjggfk Hofx Albeg Decks: 2 Year of manufacture: 2006 Overhauled. With new bearings. Included: – Electrical Motor – Springs Vibrating screen is sandblasted, painted and ready for use!

Condition: like new (used), Manufacturer: Ammann / Främbs & Freudenberg Size: 1.400 x 3.000 Included: – Electrical Motor – Cardan shaft Cedpfxeg Snuts Alberg – Springs Elements. Vibrating screen is overhauled, sandblasted and painted.

Condition: good (used), Manufacturer: Stuckstette Size: 1.500 x 4.500mm Decks: 4 Frame: Not included Included: – Electrical Motor – Springs Vibrating screen will be overhauled, sandblasted and painted. Cjdeg Snudjpfx Alberg

Condition: like new (used), Manufacturer: Kleemann Type: VU1S 1240ST Size: 1.200 x 4.000mm Mach. No.: 38016201 Year of Manufacture: 1998 Deck: 1 (Ca. 80mm Deck opening) Included: Codpfxeg Sty Es Albsrg – Electrical Motor – Springs Vibrating screen can be sandblasted and painted.

Condition: like new (used), “GFA 2QL 5000/2000” for Sale Manufacturer: GFA Type: 2QL 5000/2000 Deck size: 2.000 x 5.000 mm Number of decks: 2 (Different deck-angle) Included: – Electrical Motor Crodpfx Alshcw T Esbsg – Cardan Shaft – Springs Vibrating screen can be sandblasted and painted.

Condition: like new (used), Manufacturer: GFA Type: 1T Size: 1.800 x 4.000mm Cedpjg Stuksfx Albjrg Mach. No.: ASS 3414 Year of Manufacture: 1998 Included: – 11kW/6 Electrical Motor – Cardan shaft – Springs Vibrating screen will be overhauled, sandblasted and painted.

Year of construction: 2009, condition: used, Year : 2009 Csdpfx Aeykb U Nelborg Type: Vibrating sieve Material : stainless steel Engine reference: Elettromeccanica Tarcisio Pugni PVF-F 200 Motor power: 1.1 kW / 1500 rpm Nominal sieve diameter: 900 mm Système de décolmatage : billes Machine dimensions: 110 x 130 x 120 cm Plan for replacement of the grid: this item may be subject to a separate quotation.  

Condition: good (used), Manufacturer: Främbs & Freudenberg Type: 2000-6000-2 Deck size 2.000 x 6.000 mm Number of decks: 2 Crsdpfxeg Snvbo Albeg Included: – Electrical Motor – Cardan Shaft – Springs Vibrating screen can be overhauled, sandblasted and painted.

Condition: like new (used), Manufacturer: SKET Size: 1.600 x 5.500mm Decks: 2 Included: – Electrical Motor – Springs Vibrating screen will be overhauled, sandblasted and painted. Cedpfjg Stunox Alborg

Year of construction: 2005, condition: like new (used), “ThyssenKrupp Turbo 2,2×4,0(5,2)DD“ for Sale Find our complete stock on our website. Manufacturer: Thyssen/Krupp Type: 2,2 x 4,0 (5,2) DD Size: 2.200 x 5.200 (4.000) mm Mach. No.: 2-485-20540 Year of Manufacture: 2005 Decks: 2 Included: – 15kW/4 (950 RPM) Electrical Motor Credpfxjglvw So Albog – Springs Vibrating screen can be sandblasted and painted.

Condition: like new (used), Manufacturer: Parker Type: T / D RAPID 1,5 x 4 Size: 1.500 x 4.000mm Decks: 3 Cedpfx Aljg Snulsbsrg

Condition: like new (used), Manufacturer: Siebtechnik Type: V 15/20/1 Size: 1.500 x 2.000mm Deck: 1 Crodpsg Snuhjfx Albog Included: – Electrical Motor – Springs Overhauled, sandblasted and painted.

Condition: refurbished (used), “2 Pcs. Krupp 1.600 x 2.000mm“ for Sale Find our complete stock on our website. Manufacturer: Krupp Size: 1.600 x 2.000 mm Decks: 1 Included: Cedpjglvwyefx Alborg – Electrical Motor – Springs

Condition: ready for operation (used), Vibratory feeder, circular feeder, vibratory parts feeder 500 mm, used machine Manufacturer: Gasco Type: BVN 3 Overall dimensions: Width: 580 mm Codpfx Aexnc Svolbsrg Depth: 580 mm Height: 460 mm Electrical data: 230 V, 1.6 A, 368 W Bowl size: 330–500 mm

Condition: ready for operation (used), Vibratory feeder, circular feeder, vibratory parts feeder 640 mm, used machine Manufacturer: Gasco Type: BVN 4 Overall dimensions: Width: 720 mm Cjdexnc S Nopfx Alborg Depth: 720 mm Height: 510 mm Electrical data: 230 V, 2.5 A, 575 W Bowl size: 340–640 mm

Condition: used, Universal Shaker accessory kit / adapter plates / expander plates Professional accessory kit for electrodynamic shakers and vibration test benches For sale is a comprehensive used accessory kit for electrodynamic shakers or vibration test benches. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, and additional adapter and clamping components for professional use in vibration and shock testing. These components are ideally suited for test specimen mounting, special fixtures, and custom adapter designs in the field of material testing, environmental simulation, and research and development. Technical data Manufacturer: unknown Type: Accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components • 1 expander plate, approx. 770 × 770 mm Weight: approx. 90 kg • 2 adapter plates, approx. 770 × 770 mm Weights: approx. 45 kg and approx. 40 kg • 1 adapter plate, approx. 770 × 770 mm Weight: approx. 35 kg • 1 adapter plate with circular cutouts Weight: approx. 25 kg • 1 round adapter plate Weight: approx. 20 kg • 1 clamping rail / linear adapter Weight: approx. 25 kg • 1 precision adapter block Weight: approx. 3.06 kg • 1 steel adapter plate Weight: approx. 2.18 kg • Additional adapter and fastening parts as shown in the images Features Solid aluminum constructions Reinforced expander plate with central mounting Precision-manufactured adapter plates Bore and thread grid for flexible test specimen mounting Adapter plates in various sizes Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional accessories as shown in the images Application areas Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Fatigue testing Automotive industry Aerospace Research and development Test specimen mounting and special constructions Shipping information Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Condition Used. Optical condition as shown in the images. Normal wear and tear, scratches, and pressure marks present due to age. Some minor edge damage from previous use. Scope of delivery Complete accessory kit as shown in the images. Expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional adapter and fastening parts as shown in the images. Note: Only the accessories shown in the photos are being sold. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping information Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone. Credpfozp D Tkex Albjg

Condition: used, Industrial Eccentric Drive, Vibratory Exciter Unit, Shaker Drive Unit, Used machine Crjdpfx Alozwdz Rebog Manufacturer: Unknown / Industrial execution Type: Eccentric drive with counterweights Condition: Used, robust industrial execution Overall dimensions: 760 x 530 x 410 mm Design / Operation: Heavy-duty industrial mechanical shaker and vibratory drive unit, featuring dual output shafts with eccentric counterweights (exciter masses) in a rugged housing. Suitable Application Areas: Industrial vibrating screens and sieves: Mechanical excitation and drive unit for vibrating screeners, separators, and sifting equipment. Vibratory feeders and conveyors: Driving vibrating tables and feeder troughs used for bulk material handling (rubble, ore, coal, recyclable waste). Recycling and mining industry: Generating linear or circular vibrations for material separation and sorting systems under heavy-duty conditions.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 380 V, cutting height (max.): 110 mm, cutting width (max.): 920 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,000 rpm, total length: 1,080 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 150 kg, Equipment: documentation/manual, saw blade guard, For sale is a DEWALT radial arm saw 1600S in very good condition (almost new) with accessories and 3 new, unused saw table shims. The saw is being sold privately and has never been used professionally, which explains its excellent condition. It is specifically designed for stationary use. Thanks to the powerful 4 hp motor, materials up to 110 mm thick can be processed with saw blades up to 350 mm in diameter. The motor runs with the highest precision on 8 large special ball bearings in the prismatically ground running surfaces of the arm. The arm, column, and frame have additional reinforcements. The DEWALT 1600S is also suitable for use with pneumatic feed in series production. With a cutting width of 610 mm, the DEWALT 1600S is the ideal machine for processing series parts in interior design, shop fitting, trade fair construction, furniture manufacturing, and the industrial production of wooden components. The saw has a sturdy metal base, three new, unused work tables, a new universal saw blade, and various accessories. The original operating manual is included. Max. cutting length (90° crosscut): 610 mm Standard cutting depth: 110 mm Max. cutting depth (45° miter cut): 60 mm Cedpfxszyymbo Alberg Max. cutting width (rip cut): 920 mm The saw must be picked up.

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Crjdpfxjzxzrpj Albeg Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Crsdpfxjyn Shzs Albog Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Cjdpszxxmkofx Albsrg Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: like new (used), functionality: fully functional, CIRCULAR SAW model CASOLIN ASTRA 400 . carriage mm. 3800 second hand machine in excellent working condiiton CE-compliant machine: YES electric blade lifting electric blade tilt with scoring blade: YES scoring blade with electric movements from control panel independent motors volts 380/50 digital blade tilt display digital blade height display technical details : anodized aluminum carriage: mm.3800 cutting width on the rip fence: mm.1300 maximum panel passage to the right of the blade mm. 2000 max. blade diameter: mm.400 (with scoring blade installed) blade unit tiltable at 45° scoring unit with independent motor: YES blade rotation speed: rpm 3200 / 4200 / 5000 saw blade unit: motor power Hp 7,5 scoring unit: motor power Hp 1 machine equipment : aluminum telescopic rod n.2 mechanical stops Csdpfxozygcpo Albjrg suspended "bridge" protection on the blade n.2 additional frames (rear and side)

Condition: used, Industrial Bowl Feeder and Linear Feeder, Lysta Vibrator, Used machine Manufacturer: Lysta Vibrator (Albertslund, Denmark) Type (Vibratory Bowl Feeder): D 600/750 (Serial number: 1874) Type (Linear Vibratory Feeder): 400 x 75 (Serial number: 472) Condition: Used, industrial execution Cjdpfjzwdzdex Albjrg Overall dimensions: 710 x 1360 x 1450 mm Technical and operating parameters: Bowl diameter: 450 – 750 mm Linear track size: 200 x 700 mm Electrical data (Bowl Feeder): 220 V / 230 V, 1 phase, 50 Hz, 3.5 A Electrical data (Linear Feeder): 220 V / 230 V, 1 phase, 50 Hz, 0.3 A Design / Operation: Electromagnetic orientation and feeding system with rotary bowl drive and linear transfer track. Suitable Application Areas: This high-precision Danish vibratory feeding system is perfectly designed for automated sorting, orientation, and feeding of small components: Assembly lines and automated cells: Feeding fasteners (screws, nuts, washers), plastic parts, or electronic components in correct orientation to assembly machines or robotic workstations. Packaging systems: Controlled, continuous, or counted feeding of small products into packaging machines. Plastics and metal processing: Orienting and singulating bulk mass components for machining, inspection, or sorting stations.

Condition: new, Year of construction: 2026, JMY-870 Circular Saw Blade Sharpener is a precise and reliable machine designed for sharpening carbide-tipped (TCT) saw blades with diameters ranging from 80 to 700 mm. Developed for professional users, it ensures high sharpening quality and stable operation thanks to its robust cast iron construction. The machine comes equipped with a diamond grinding wheel, providing long service life and excellent machining accuracy. Main advantages of the JMY-870 saw blade sharpener 125 mm diamond grinding wheel – ideal for sharpening carbide-tipped (TCT) saw blades. Sharpening angle adjustment from -35° to +45° – allows precise adjustment of the blade position according to the saw blade type. Csdpfx Aeu Tti Iolbsrg Bevel angle adjustment from -30° to +85° – provides full flexibility when selecting tooth geometry. Stable cast iron base – minimizes vibrations and ensures safe operation. Set of reducing bushings included – enables compatibility with different blade bore diameters. Free tool set included – the machine is supplied with the necessary keys required for operation. Quiet operation – rubber vibration-damping pads improve user comfort. Design and technology The JMY-870 sharpener is equipped with a precise blade mounting system and an adjustable support table, allowing accurate positioning of the blade in both planes. The powerful 0.25 kW motor with a speed of 2850 rpm provides optimal grinding performance and high sharpening quality. Precision and work efficiency High-quality workmanship and a stable construction ensure uniform sharpening of every saw tooth. Thanks to a wide range of angle adjustments and precise blade guidance, the sharpener guarantees accurate results even when working with very hard materials. Applications The JMY-870 saw blade sharpener is ideal for: woodworking workshops, production plants, tool regeneration and sharpening service centers. It is perfectly suited for sharpening circular saw blades with various tooth geometries and, thanks to its precise operation, can also be used in professional industrial tool sharpening applications. Standard equipment 125 mm diamond grinding wheel Set of reducing bushings for different saw blade bore diameters Cast iron base with rubber vibration-damping pads Technical specifications Minimum / maximum saw blade diameter 80 mm – 700 mm Horizontal blade holder adjustment -35° to +45° Grinding assembly tilt angle -20° to +20° Grinding wheel speed 2850 rpm Grinding wheel dimensions 125 × 10 × 13 mm Motor power 0.25 kW Power supply 230 V Net weight 21 kg Machine dimensions 750 × 750 × 350 mm