Used Circular Kneading Machine for sale (83,652)

Condition: good (used), Year of construction: 2008, Table Circular Saw METABO Model: THKS 315 C / 2.80 DNB Year of manufacture: 2008 3-phase 400 Volt 50 Hz Power: 2.8 kW Blade bore: 30 mm Saw blade diameter: 315 mm Mitre fence Mitre adjustment 45-90° Max. cutting height 90/45° Max. cutting width at parallel fence Carbide-tipped saw blade with alternate teeth Saw blade guard Knsdpfoxvquuox Adqed Table extension

Condition: used, Year of construction: 2014, for sale Machine types & quantities: - 1 unit: Linear transport system for 14 stations, type: LT-14-270 (original from sp280) - 1 unit: automatic loading station - 1 unit: new infeed station - 1 unit: double spiral kneader + powerbox Type: W240A No: 7402-978 - 1 unit: dough return station - 1 unit: lift and tipper, type: HK1200 - 3 units: 3 mixing bowls. Type: W240A - the frames and platforms for this line - 1 unit: weighing hopper - 1 unit: star hopper - powerbox - the small parts required for the line Inspection of the line is possible on site. If you have any questions or remarks, please feel free to contact us. The seller will load all goods carefully into the container/truck. The buyer will need to arrange transportation. Kind regards, Leo Holland Kedpfxjnnz Hwj Adqend

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Knjdpjxycy Rsfx Adqed Spindle diameter: 30 mm 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Used grinding line for circular saw blades Model: 2 × PRESTIGE (HSS/CERMET grinding machines) + 1 × LOAD-5 (5-station automatic loader) Kjdpfxexx Ix Ao Adqond Condition: Used, in good technical and visual condition Saw blades: Ø250–630 mm

Condition: new, The KKS 275 T, a Manual Circular Saw Machine from KNUTH, is your essential tool for precise cutting in any workshop. Designed for machining smaller tubes and profiles, it features a robust yet easy-to-operate design, allowing for accurate miter cuts of up to +/- 45 degrees. The KKS 275 T is equipped with a high-precision rigid vise, which incorporates a quick-action clamping feature that is ideal for small batch production. With its built-in coolant system and an integrated rust-proof gear mechanism, it ensures durability and minimal maintenance. This model not only handles solid materials, tubes, and sections of steel and light metals efficiently but also provides a large cutting capacity with dimensions of up to 70 mm for round and 90x45 mm for flat workpieces. For optimal performance, request a quote for the KNUTH KKS 275 T, a reliable choice in the Circular Sawing Machines product group. Kodpfeuyifnox Adqend

Year of construction: 1982, condition: used, Circular saw blade sharpening machine Kodpfxscq Nghs Adqjnd Loroch JLM 36

Condition: used, This profile cutting machine or cross-cut saw for plastic and aluminium frames is being auctioned in our industrial auction/machinery auction - insolvency auction Wietec Fenster GmbH: machinery fleet, workshop equipment, trailers, online. Ksdpfx Ajxu Ix Iedqjnd

Condition: used, Manufacturer: Carl Kurt Drum diameter: 700 mm Motor: 1 kW Knjdpfx Adeu Abr Eoqjd

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch * Timer and working hours counter * Control box with switch for motor right/left rotation Kodsw Dp Ekjpfx Adqjnd * CE safety standard PAINTING: * Colour in RAL 5011 & RAL 7036 * Epoxy paint is used to ensure long-lasting coating durability.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 12/2027, total length: 1,080 mm, total width: 680 mm, total height: 1,280 mm, input frequency: 50 Hz, type of input current: three-phase, power: 4.5 kW (6.12 HP), electrical fuse: 16 A, spiral kneader Model: SP 60 T Kneading machine with mature and robust technology! Digital easy touch control with rewind button Dough machine with 3 timers 1 mixed gear and 2 forward gears Knedpfohq Hpfsx Adqod for min/max 6 - 60 kg of dough Flour dust hood with damper Stainless steel boiler and spiral Machine mobile with 4 brakes DGUV V3 tested Connection 400V, 4.5 kW, 16A-CEE plug Dimensions: 680 x 1080 x 1280/1700mm, WxDxH With guarantee Come to our large bakery machine warehouse and find your machine!

Condition: new, The KKS 350 T, a Manual Circular Saw Machine from KNUTH, is your essential tool for precise cutting in any workshop. Designed for machining smaller tubes and profiles, it features a robust yet easy-to-operate design, allowing for accurate miter cuts of up to +/- 45 degrees. The self-centering dual vise secures the workpiece firmly on both sides of the blade, ensuring stability during operation. With a cutting capacity of 120 mm for round materials and 140 mm x 100 mm for flat stock, this machine excels at processing solid materials like steel, iron, and light metals. It is equipped with a built-in coolant system and a high-torque motor for efficient performance. If you’re looking for a reliable tool in the Circular Sawing Machines category, the KKS 350 T delivers high-precision results every time. Request a quote today and enhance your capabilities with this Manual Circular Saw Machine from KNUTH. Knsdpfxjuyifbo Adqjd

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Loading Unit: Horizontal loading magazine model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Maximum material height as per saw cutting area; round material max. diameter 130 mm 3 glide strips between timing belts provide additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Maximum saw blade diameter: 500 mm Continuously variable speed adjustment Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 controller with touchscreen Reversing device with five-fold stroke up to max. 5,000 mm Knedpfoxvbvvjx Adqod Electric material feed 3 - 1,000 mm (single stroke) Cutting gap extension, both sides Pneumatic extraction slide Scrap flap after the saw for offcuts / remnants Cut-off length depends on profile, from 8 mm Menzel minimal quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust collection Unloading: Table area 1,500 mm x 2,500 mm Pneumatic cross transfer

Condition: used, Year of construction: 1978, saw blade diameter 225 mm cutting diameter max. 60 mm feed max. 600 mm total power requirement 5 kW weight of the machine ca. 1,03 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Knedpfxogwdqyj Adqed +++++

Year of construction: 2011, condition: used, Technical details: saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Knedpju Niuhefx Adqod Cutting speed depends on the material to be sawn Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump *

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS125, total width: 870 mm, total height: 950 mm, overall weight: 185 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 150 mm, workpiece length (max.): 150 mm, ZCVS 125 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 125 liter volume * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) Knedpfsh Agr Hjx Adqjd * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5011 & RAL 7036 *Epoxy paint is used to ensure long life of the paint

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 12/2027, total length: 1,010 mm, total width: 630 mm, total height: 1,220 mm, input frequency: 50 Hz, type of input current: three-phase, power: 4 kW (5.44 HP), electrical fuse: 16 A, Spiral kneader Model: SP 50 T Kneading machine with sophisticated and robust technology! for the best kneading results! Digital easy touch control with rewind key Dough machine with 3 timers 1 mixed speed and 2 forward speeds for min / max. 6 - 50 kg of dough Flour dust hood with steamer Stainless steel kettle and spiral Kettle left and right barrel Mobile machine with 4 brakes Knedpohfha Dsfx Adqed DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Dimensions: 630 x 1010 x 1220 / 1600mm, WxDxH With a 24 month warranty Visit our large bakery machines warehouse!

Year of construction: 2012, condition: as good as new (ex-display), Round 50 with MIG/MAG preparation consisting of: - Rotary tilting table Turn50 - three-jaw chuck 200mm with centering fixture - Attachment kit quill with manual operation - welding cable 50mm² - Attachment set circular weld 1 (cable set+initiator) - Base frame with mounting kit for torch stand and integrated magnetic stop - Torch stand Fix50/50 1000/500 F/H Stand tube 1000mm extension arm: - Tube spindle unit 500mm - - Burner fine positioning 3x50mm with tube connection piece - Ball joint KG1 Universal torch clamp with indexing - 37/38mm for MIG/MAG automatic welding torches - Control 12 Automation control Ksdjiby Naopfx Adqsnd with integrated control panel - LorchNet connection cable 1m 2 x M12 Connector

Condition: good (used), Year of construction: 1987, machine/vehicle number: Kahny, Fully working Kjdpfx Adexp N I Hoqond

Year of construction: 2014, condition: ready for operation (used), X-axis: 350mm, z-axis: 1000mm, grinding diameter: 290mm, grinding length: 800mm, center height: 150mm, x-axis speed: 0.0001–10m/min, z-axis speed: 0.0001–12m/min, control: CNC Fanuc Oi-TD, connected load: 25kVA, length: 3340mm, width: 2660mm, height: 2325mm, weight: 8t. equipment/accessories: software functions for grinding spline shafts for gear pumps, external grinding cycles: plunge, straight, taper, multiple plunge, straight, taper, oscillation, straight, taper, shoulder plunge, shoulder with K-value, shoulder oscillation, DIN ISO. dressing cycles: dressing of radii as well as concave and convex shapes possible, periphery, left flank, right flank, profiles according to DIN ISO. measuring system: measuring device tec, diameter measuring head measuring range: 1mm, measuring accuracy: 0.5μm, not suitable for measuring an interrupted cut, length measuring head measuring range: -/+2mm, measuring accuracy: 0.5μm, use of two length measuring heads (2 measuring probes). operating hours: approx. 7847h. documentation available. an on-site inspection is possible. Knodsv Exr Ropfx Adqod

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg Kjdpfxsu Nkxhe Adqjnd POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging Kederkmv Sjpfx Adqsnd *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 12/2027, total length: 700 mm, total width: 505 mm, total height: 870 mm, input frequency: 50 Hz, type of input current: AC, power: 1.3 kW (1.77 HP), electrical fuse: 10 A, spiral kneader Model: ECO 12 Kneading machine with mature and robust technology! LED control Knsdpfx Ademfnuisqod Dough machine with 2 timers 2 gears in 10 steps for min/max 1.5 to 12 kg of dough flour dust hood Stainless steel boiler and spiral Machine mobile with 4 brakes DGUV V3 tested Connection 220V, 1.3 kW, Schuko plug Dimensions: 505 x 700 x 870 mm, WxDxH NEW machine With 24 months warranty Visit our large bakery machine park!

Condition: used, Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43246, working width: 300 mm, Possible Technical Specifications (based on comparable models) Type: Single jersey circular knitting machine with up to four needle tracks. Cylinder diameter: 26" to 48". Knsdpfowt Rfdox Adqed Gauge (fineness): E14 to E60. Number of feeders: 3.2 per inch (e.g., 96 feeders with a 30" diameter). Speed: Up to 25 revolutions per minute at a 30" diameter. Speed factor (SF): 990. Structures: Single jersey, piqué, double piqué, two-thread fleece, and single jersey with plating. Applications: Underwear, nightwear, outerwear, sports and leisurewear, swimwear, automotive, and mattresses. Supplied complete with accessories. Including enclosure Additional information: Length (machine): 3000 mm Width (machine): 3000 mm Height (machine): 2800 mm These values represent the external dimensions of the machine itself. Capacity (cylinder diameter): 813 mm Number of needles: 2808 pcs Needle Ø: 0.91 mm Number of yarn spool holders: 100 pcs

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Knodowvbk Ajpfx Adqod Material height: 70 mm *

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2025, input voltage: 400 V, DGUV certified until: 11/2026, Diosna dough machine Model: laboratory kneader Stainless steel kettle and kneading arm for max. 6 kg dough Protective grid with protective circuit 2 courses Mobile machine underframe DGUV V3 tested E-system NEW Kedpfx Aohfhutjdqjnd Connection 400V, 3 Amp, 16A-CEE plug Used machine overhauled with 6 months warranty Visit our large bakery machines warehouse!