Used Circular Knitting Machine for sale (64,932)

Condition: good (used), Year of construction: 1990, functionality: fully functional, Paoloni TT20-I Circular Saw Milling Machine S/N 00005/90 Year of construction 1990 Manufacturer Paoloni Macchine S.p.A. Italy Saw blade diameter max 350 mm Aluminum carriage with V-guide carriage length 2.100 mm rip fence 125mm Support table up to 340cm Saw blade tiltable 45 degrees scoring unit 125mm, 1 HP Cutting height max 110mm Motor 5.5 HP Speeds: 3000/4500 / 6000 Table milling machine Spindle diameter 30mm for tenon cutters Spindle stroke 180mm max table opening 340mm motor 5,5 HP Dkodetq Ivlopfx Al Asu 5 different speeds (adjustable with belt pulley) 2500-8500 RPM weight 1300 kg

Condition: used, Year of construction: 2022, functionality: fully functional, KARL MAYER PROSIZE - HIGH-PERFORMANCE and INNOVATED SIZING UNIT for processing spun yarns -28 Pos : max. working width in the creel: 2200 mm -200 mm : working range -Beam creel :max. beam flange diameter: 1000 mm Dkodpfx Alezb Uzwo Aeu -Warp Tension Control -Automatic squeeze pressure control With all required accessories.

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Dkodpfx Ajzy Upkel Aju Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2023, For sale is a demonstration unit Hammer K3 Winner Comfort panel saw with a cutting length of 2000 mm. The machine is in mint condition. Technical data: - Sliding table: 2000 mm Dodpfevxrurex Al Aoku - Outrigger table: 1100 mm - Mitre fence: 1300 mm - Angle indexer - Saw blade tiltable 90-45° - Max. cutting height: 104 mm with blade diameter 315 mm - Cutting width: 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2023 The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, sliding table saw Reference: R-A0117

Condition: good (used), Year of construction: 2001, machine/vehicle number: 6028, functionality: fully functional, input voltage: 400 V, cutting width (max.): 1,200 mm, saw blade diameter: 4,000 mm, height adjustment type: hydraulic, rotational speed (max.): 6,000 rpm, rotational speed (min.): 3,000 rpm, length stop: 3,200 mm, table length: 3,200 mm, trimming length: 2,000 mm, Machine no: 6028 Types: 690 B 3000,4000,5000,6000 rpm Dodpfx Ajvl Icrsl Asku Power: 3/400V/50Hz Motor: 5.5 Kw Table 2000X400 mm

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. Dodpfx Aoz Eft Iel Aeku The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: ready for operation (used), Various flat knitting machines with different gauges and Groz-Beckert needle sets are available. 1) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 2) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 3) Stoll CMS 303 TC, gauge: E12, nominal width: 1270mm, needle set: 12. 4) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 5) Stoll CMS 340 TC, gauge: E12, needle set: 12. 6) Stoll CMS 411, gauge: E10, needle set: 10. 7) Stoll CMS 422 TC, gauge: E12, needle set: 12. 8) Stoll CMS 422 TC, gauge: E12, needle set: 12. 9) Stoll CMS 422.6, gauge: E12, needle set: 10. 10) Stoll CMS 422.6, gauge: E12, needle set: 10. 11) Stoll CMS 422.6, gauge: E14. 12) Stoll CMS 422.6, gauge: E14. 13) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 12. 14) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 10. 15) Stoll CMS 430.6, gauge: E12. 16) Stoll CMS 922, gauge: E12, needle set: 12. 17) Stoll CMS 922, gauge: E12, needle set: 12. 18) Stoll CMS 933 HP, gauge: E14. 19) Stoll CMS 933 HP, gauge: E12-10, needle set: 12. 20) Stoll CMS 933 HP, gauge: E12-10, needle set: 10. 21) Stoll CMS 933 HP, gauge: E12-10, needle set: 10. 22) Stoll IBOM/b, gauge: E14, nominal width: 180mm. 23) Stoll IBOM/c, gauge: E14, nominal width: 200mm. Including 2 needle sets and various conversion kits Stoll, Groz-Beckert and Universal. Documentation available. An on-site inspection is possible. The machines are still in operation and are maintained and well-kept. Individual sale possible. Dkodpfjy Igb Dsx Al Aeu

Condition: ready for operation (used), Year of construction: 2022, Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible. Dkedpszc Rdqefx Al Aju

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Dkedowrfmajpfx Al Aou Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Djdpfx Asxvbvvsl Aeku Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: div., Equipment: type plate available, CMS 530 HP; E 7.2; Year of manufacture: 2014; Quantity: 1 Djdpfx Aewqdx Sol Aoku CMS 822 HP; E 7.2; Year of manufacture: 2014; Quantity: 9 CMS 822 HP; E 3.5.2; Year of manufacture: 2014; Quantity: 4 Scomar band machine; E 10; Quantity: 2 EMIL NESTEL; yarn machine; Quantity: 1 Steiger patent machine; E 12 / E 8; Quantity: 1 Hirschburger; spooling machine; Quantity: 1 Stoll program; M1 plus, Quantity: 3 various suppliers

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy-duty panel saw with scoring unit and Siemens three-axis control system Exhibition machine with full warranty Hanging control panel with Siemens control and a large 10" touchscreen Control of saw blade height/tilt and positioning of the parallel fence via the control panel Max. cutting height 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High self-weight ensures vibration-free operation Large cantilever table with material roller Extendable aluminum rip fence with three folding stops and digital position display Dodpfjvmfawox Al Ajku 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding table with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard equipment includes table extension and table lengthening made of steel sheet Large pendulum guard can be easily raised using a gas spring Saw blade clamping via a tool-free rapid clamping system The panel saw is assembled in our demonstration center in Chemnitz. It is new and in unused condition. We will be happy to assist with transport, assembly, and training.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Circular saw SICAR EXPRESS 32 year of construction 1996 S/N 800066 Manufacturer SICAR Italy Aluminum sliding carriage 1600mm main saw motor 5,5hp ( 4,0kW ) motor independent scoring motor 0,55kW Blades with 300/350/400 mm Cutting height of 110 mm at 90° and 80 mm at 45°. Manual tilt and height adjustment Inclination of main saw blade and scoring blade reaches 45° Extra ruler for angular cuts Workpiece hold-down device Top extraction also for 45° cuts Voltage 380 V, 50 Hz. CE marked 720 kg Dkodpfxstw D Tbs Al Aou Technical data subject to change

Year of construction: 2024, condition: ready for operation (used), An almost like-new and high-precision CNC centerless grinding machine Monzesi is available. Grinding wheel outer diameter min./max.: 406mm/280mm, inner diameter: 152mm, max. width: 200mm, speed: 2100rpm, power: 11kW. Regulating wheel outer diameter min./max.: 160mm/254mm, inner diameter: 115mm, max. width: 200mm, speed: 285rpm. Workpiece diameter: 100mm, workpiece length: 200mm, regulating wheel axial adjustment: +/-10mm, taper setting: -2°/6°, tilt adjustment: +/-5°, accuracy: 0.0001mm. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/21500mm, weight: approx. 4500kg, control: CNC Fanuc 35i-B Digital, operating hours April/2026: 481h. Documentation available. An on-site inspection is possible. Expected to be available from end of July/August 2026. Dedpfxeyyb Tlj Al Ajku

Condition: good (used), Year of construction: 2000, Panel saw with scoring unit 3 m sliding table Length adjustment via display Dodpfstw Hd Ajx Al Aeku Width adjustment by hand Height adjustment converted to foot-operated hydraulic system with clamping bar for veneer or other materials

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Dsdpfx Ajxzfqbol Asku Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: used, Weiss sharpening machine for sharpening small and medium-sized circular saw blades. The machine is mounted on a workbench. Dksdpfjzrx H Dox Al Aou Technical data: - Saw blade diameter: max. approx. 600 mm

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 Dksdpfx Aerkmv Sel Aju *Epoxy paint is used to ensure long life of the paint.

Condition: used, 3.7 kW motor Table length 260 cm Dedpfxjulg Szj Al Asku Working width 100 cm With a cutter

Condition: good (used), Year of construction: 2004, Offer 24455 Technical data: - Saw feed via hand lever - Saw blade diameter 315 mm - largest opening width vice approx. 160 mm - Cutting range approx. at 90° approx. 100 mm - flat up to 135 x 80 mm - Cutting range Li + RE at 45° approx. 108 mm - flat up to 100 x 80 mm - Cutting range Li at 60° approx. 80 mm - flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm Dodpfx Aleuv Eygo Aoku - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Year of construction: 2012, condition: ready for operation (used), A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible. Djdpeu Nlk Sjfx Al Aoku

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 350 mm, total length: 1,000 mm, total width: 1,150 mm, total height: 1,550 mm, cutting range round steel at 90°: 125 mm, overall weight: 620 kg, saw blade speed: 2,800 rpm, length stop: 2,000 mm, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Dodpfx Alotqfvyj Aoku

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Dksdpfx Aoxxb Rrol Asu Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Weight: 2.2t, including documentation. Dodpfxjmqly Ue Al Ajku

Condition: used, Year of construction: 2004, Seven UNIVERSAL MC flat knitting machines are available as a package, 1) UNIVERSAL MC-825 CXL, gauge: E3, year of manufacture: 2004, width: 64in/1630mm, 2) UNIVERSAL MC-835, gauge: E5, year of manufacture: 2004, width: 48in/1220mm, 3) UNIVERSAL MC-720, gauge: E5, year of manufacture: 1995, width: 90in/2300mm, 4) UNIVERSAL MC-720, gauge: E8, year of manufacture: 1995, width: 90in/2300mm, 5) UNIVERSAL MC-720 PJ, gauge: E8, width: 90in/2300mm, 6) UNIVERSAL MC-720 PJ, gauge: E10, width: 90in/2300mm, 7) UNIVERSAL MC-720, gauge: E10, width: 90in/2300mm, documentation partially available, an on-site inspection is possible, not connected to power. Dodsz Euc Ejpfx Al Aeku