Used Chocolate Molding Machine for sale (83,863)

Condition: excellent (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Equipment: documentation/manual, Due to recent developments - Tax notice and advantage for used machines From 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year. In addition to the more favorable price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Paragraph 2 German Income Tax Act - draft) Engel E Max cleanroom machine, year 2008, including GEKU SR 500 ST linear robot The machine has operated just under 58,000 pump hours in automatic mode. The machine comes from a well-known pharmaceutical manufacturer, which means both the machine and the handling system were subject to very strict maintenance management and are in excellent condition. Todpfxet A Ufws Af Tef We provide a commissioning warranty for every machine purchased from us.

Condition: used, Year of construction: 2001, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4.940 g/PS closing pressure: 9000 kN weight of the machine ca.: 19 t Out of serial production Machine and Robot condition regularly checked by EngelCare program Linear robot on machine was fully refurbished in 2021 Tjdpjtuncvefx Af Tof *

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Tsdpfxsxzklqe Af Tof Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Condition: good (used), Year of construction: 2006, operating hours: 58,401 h, machine/vehicle number: 61007671, Technical details Tedpfx Aexzdqajf Tef Clamping force: 4200 kN Size of mould platens (H x V): 800 mm x 800 mm Mould opening stroke: 1020 mm Minimum mould height: 380 mm Maximum mould height: 1400 mm Max daylight: 1380 mm Hydraulic ejector – stroke: 250 mm Ejector force forward/backward: 95 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Stroke volume: 1433 ccm Shot weight PS: 513 g Screw speed: 218 1/min Maximum plasticising rate: 108 g/sec

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, clamping force: 350 kN, screw diameter: 28 mm, injection pressure: 1,577 bar, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 35M injection moulding machine. The 30 & 35 machines are a rare find on the used market as they offer a versatile four tie bar setup with good platen areas, from a footprint not much larger than that of a BOY 22. If you’re looking for the most versatile little machine, this has to be worthy of consideration. Fitted with the Procan MD controller and 28mm diameter screw, which gives a shot weight of 55.8 (PS)g. Tedpfxoxxlmdo Af Tsf Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2004, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 80 mm, injection pressure: 2,500 bar, For sale: Injection moulding machine Arburg 820S 4000-2100, serial no. 195746. The item is in good condition. Technical specifications: Year of manufacture: 2004 Injection unit: 2100 Screw diameter: 80 mm Shot volume: 1407 cm³ Clamping force: 4000 kN Tie bar spacing: 820×820 mm Platen size: 1171×1171 mm Maximum mould height: 850 mm Maximum opening stroke: 700 mm Maximum distance between platens: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Maximum weight of moving mould half: 4500 kg Hydraulic pump drive power: approx. 55 kW Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzles Net weight of machine: 22,700 kg Dimensions (L × W × H): approx. 8.0 × 2.3 m Control system: SELOGICA Machine cycles: 4,157,591 Pump hours: 69,800 Auto mode: 58,556 Transport and loading can be organised Europe-wide on request, at an additional cost. Prices excl. VAT Todoxxi Nvopfx Af Tef Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase & sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing business? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, Technical Details Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw diameter: 25/22 mm Machine weight: 10,600 kg Additional equipment included: GEKU SR 500 ST robot Safety enclosure Rotary table The machine has run nearly 33,107 hours in automatic mode. Tsdet A Ui Aopfx Af Tjf Current note – Tax advice and advantage for used machines From 01/07/2025, used machines can also be depreciated for tax purposes with a special annual depreciation rate of 30%. In addition to the more favorable price compared to a new machine, you can claim the same depreciation benefits as for a new machine. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 193818, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, injection pressure: 2,080 bar, injection weight: 297 g, ejector stroke: 225 mm, opening stroke: 650 mm, plate width: 685 mm, plate height: 685 mm, installation height: 250 mm, total length: 5,500 mm, total width: 1,600 mm, total height: 2,160 mm, overall weight: 6,630 kg, number of injections: 1, input current: 125 A, Equipment: documentation/manual, All items are sold as used and untested unless otherwise specified. Only the injection moulding machine is offered for sale, without handling device or accessories. Please pay attention to the item description. Todpfx Aoxy Iugef Tof

Condition: excellent (used), Price: €50,000 Package 11 ARBURG injection moulding machines Models - Allrounder: 270-S-500-60 Tedpfexw U Uhox Af Tsf 270-M-500-90 270-S-400-70 221S-350-100 370S-500-100 370S-700-70

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Tedsh Dr E Tepfx Af Tef Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: good (used), Year of construction: 2004, operating hours: 29,461 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, injection weight: 140 g, For sale: a well-maintained Arburg 570C-2000-350 2K injection moulding machine from 2004, with only approximately 30,000 operating hours. The machine is in good technical condition and is immediately ready for production. Specifications: Model: Arburg 570C Clamping force: 2000 kN Tjdoxyyxqjpfx Af Tjf Screw diameter: 35 mm (350) Year of manufacture: 2004 Operating hours: approx. 30,000 Control system: Arburg Selogica Configuration: Standard injection moulding setup, reliable and versatile Condition & Maintenance Machine always serviced as per schedule No significant fault history Clean and fully functioning hydraulic and electrical system Extras (optional) Other screw sizes available.

Condition: new, Year of construction: 2021, operating hours: 864 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 14 mm, opening stroke: 350 mm, heating capacity: 1.4 kW (1.90 HP), power: 4 kW (5.44 HP), input voltage: 380 V, DR BOY XS 5000H VIS 14 OPTIONS: INTEGRATED MANIPULATOR OPENING + 50MM Tjdpfx Afjxmfq Ee Tjf

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 2,518 mm, Arburg 520S 1600 290/70 Two-Component Injection Moulding Machine 12.3 million cycles 86,565 hours manual mode 78,099 hours automatic mode Injection unit 1: horizontal, 290 diameter, max. 71 cm³, screw diameter 25 mm Injection unit 2: vertical, 70 diameter, max. 21 cm³, screw diameter 18 mm Opening stroke: 925 mm Electric index rotation 12-zone integrated hot runner system 3x core pull 2x air blast (needle shut-off valve control) Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6kg handling unit: - 2x vacuum circuits - 5x double-acting grippers - Z-axis servo, 800mm - C, G, X, and B axes pneumatic - Various customer-specific I/O (gripper monitoring, etc.) At Maschinen-Handel, every machine purchased from us comes with a commissioning guarantee. This provides you, as the customer, with maximum security in the used machine market. Important notice! – Tax information and benefit for used machines Tedpfx Ajxzix Asf Tjf Starting from 01.07.2025, used machines will also qualify for a special tax depreciation of 30% per year. In addition to the lower price compared to new equipment, you can claim the same depreciation rates as for a new machine. Keyword: Growth Booster (§ 7 section 2 EStG-E)

Condition: excellent (used), Year of construction: 2016, operating hours: 33,500 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, clearance between the columns: 370 mm, column diameter: 35 mm, displacement volume: 144 cm³, Equipment: documentation/manual, Plasticizing cylinder assembly 35 mm (without nozzle) in highly wear-resistant version Servo-controlled, programmable nozzle unit for injection unit 1 Highly accurate and reproducible mold positioning through electromechanical servo drive Hydraulic core pull control for simultaneous, regulated movements; for both sequential and simultaneous movements, pressure and flow are programmable. Connections located on the moving platen. Electromechanical, position-controlled ejector Blow-off device 1 with pressure regulator Tedsxywxujpfx Af Tsf Electric mold height adjustment for adaptation to different minimum mold heights, adjustment range directly programmable via SELOGICA control Electric, programmable conveyor belt Sorting unit for separating good and reject parts during production, installed longitudinally below the clamping area "Extended Monitoring" equipment package: Expansion of mechanical process monitoring for mold and machine for complex applications "Extended Movement Functions" equipment package: Increased number of movement steps and intermediate stop functions Freely configurable page for "Startup Parameters" to allow a selectable number of cycles to run with parameters different from the production parameters. Additional socket combination, with 1 Schuko and 1 x CEE via automatic cutoff (1 standard included, max. 1 additional possible) Extended mold protection 6 electric heating control circuits for mold heating, each max. 2 kW / 230 V Interface for a coloring/dosing unit (volt-free contact) "Quality Assurance" equipment package Tie-bar extension +100mm for mold installation height Integral picker Machine is sold without material feed and peripheral devices.

Condition: excellent (used), Year of construction: 2017, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Demag Systec 420/820-2300 (Servo) Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control system: NC5 Operating hours: 10,800 h Clamping unit type: 420/... Clamping force: 420 t Platen size (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mold height (min.–max.): 380 – 1050 mm (increased by 225 mm) Maximum distance between platens: 1050 mm Opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever mechanism with central oil lubrication Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, L:D standard) Additional equipment Rotary Servo Technology variable displacement pump (activeDrive) 5/2 pneumatic valve no. 1 for mold moving components (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle band heater (socket) 2 core pull circuits controlled by proportional valves, pressure-independent (programmable with unlockable check valves against core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position control, programmable independently of P/F+v, parallel to mold movement Ejector movement controlled by proportional valve, stepless adjustment Tsdpfxoxywd Dj Af Tsf Reinforced oil cooler (cooling water inlet up to 35 °C)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse Todpfx Afoh Dp R Eo Tjf free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: excellent (used), Haitian Type: Mars3 5300WM/2400-720 Overall dimensions: WxHxD mm (8700 x 2800 x 2500) Screw diameter 2400: 70 mm 720: 45 mm Injection volume 2400: 1239 cm³ 720: 334 cm³ Injection capacity 2400: 1127 g  720:  304 g Injection rate 2400: 300 g/s 720: 142 g/s Injection pressure 2400: 198 MPa 720: 222 MPa Tsdpfsvvlv Rsx Af Tof Screw speed 2400: 0-184 r/min 720: 0-180 r/min Diameter of turntable : 1250 mm Max load on turntable: 3.3 t Power connection: AC 400V 3P/N/PE 50 Hz 25 kA 227 A Injection unit: Single and double cylinder control 3 modes for injection retraction Closing unit: Closing force 5300 kN Connection for Euro 18 robot Safety door Condition: used Scope of delivery: (See picture) Sale from location! Weight: approx. 31000 kg (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 Machine in very good technical condition, fully operational, ready for immediate use in an industrial facility. Clamping force factory increased by Arburg to 3600 kN. Clamping unit Clamping force: 3600 kN Platen dimensions (H × W): 1040 × 1040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum / maximum mould height: 300 mm Maximum opening stroke: 1400 mm Injection unit Screw diameter: 70 mm Injection volume: 1078 cm³ Shot weight: 984 g Injection pressure: 2000 bar Electrical-hydraulic equipment Pump motor rated power: 55 kW Todpfx Aexyq H Eof Tjf Heater power: 30.3 kW Dimensions & weight Net weight with control cabinet: 17 t

Condition: excellent (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,178 bar, injection weight: 103 g, Engel Victory 330/110 Tech General Information Year of manufacture: 2004 Control system: CC200 Weight: 7,400 kg Dimensions (L × W × H): 5.2 × 1.6 × 2.2 m Todpfjxywdqsx Af Tjf Injection Unit: 330/... Screw diameter: 30 mm Specific injection pressure: 2,178 bar Injection volume: 113 ccm Shot weight: 103 g Clamping Unit: 110/... Clamping force: 110 t Platen dimensions: 680 × 740 mm Tie bar spacing: without tie bars mm (no exact value) Opening stroke: 500 mm Ejector System Ejector force: 40 kN Ejector stroke: 130 mm

Condition: excellent (used), Year of construction: 2015, Stork S+ 6600-5650 Injection Moulding Machine Control System: CDS700 Year of Manufacture: 2015 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial facility. The injection unit was overhauled a year ago – including a new barrel, screw, and screw tip. Clamping Unit Clamping force: 6,600 kN Dimensions of mounting plates (H × W): 1,370 × 1,370 mm Tie bar clearance (H × W): 900 × 900 mm Minimum / maximum mold height: 400 – 1,125 mm Maximum opening stroke: 2,065 mm Centering ring diameter: 200 mm Todpfx Afsxyqy Ee Tof Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s Additional Equipment Pneumatic valves – 4 pcs Core pull – 1 pc Injection system overhauled: new barrel, screw, and screw tip (one year ago) The machine is available for inspection and testing under power. Photos and videos of machine operation can be provided upon request. Loading and transport can be organized.

Condition: excellent (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 85 mm, displacement volume: 2,128 cm³, injection pressure: 1,574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, Injection Moulding Machine Battenfeld HM 500/3400 Clamping force: 500 t Year of manufacture: 2007 Injection weight: 1937 g Injection unit .../3400 Screw diameter: 85 mm Specific injection pressure: 1574 bar Injection volume: 2128 ccm Injection weight: 1937 g Screw L/D ratio: 22 Tool clamping system 500/... Clamping force: 500 t Mould plate dimensions: 1590 x 1470 mm Clearance between tie bars: 1000 x 800 mm Mould height: 450 mm Opening stroke: 1150 mm Tedpfx Ajxywctjf Tof Maximum platen distance: 1600 mm Ejector stroke: 250 mm General data: Weight: 25,000 kg Dimensions [L x W x H] [m]: 7.3 x 2.5 x 2.6 Equipment: - 1 x pneumatic valve - 2 x hydraulic core pulls - euromap 67 interface - bimetallic injection system

Condition: excellent (used), Year of construction: 2011, Injection Moulding Machine Stork S+ 9000-12550 Control system: CDS700 Year of manufacture: 2011 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial environment. Clamping Unit Clamping force: 9000 kN Platen dimensions (H × W): 1570 × 1560 mm Tie bar clearance (H × W): 1010 × 1010 mm Minimum / maximum mould height: 300 – 1190 mm Maximum opening stroke: 2290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Injection volume: 6232 cm³ Shot weight (PS): 5733 g Tjdpfsxyqyxsx Af Tjf Injection pressure: 1740 bar Maximum injection speed: 300 mm/s Additional Equipment Pneumatic valves – 6 pcs Core – 1 pc The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2010, Stork S+ 9000-8650 Injection Moulding Machine Control system: CDS700 Year of manufacture: 2010 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial facility. It comes complete with a Sytrama 101 GL robot, enabling automation of the injection process. Clamping Unit Clamping force: 9000 kN Platen dimensions (H × W): 1570 × 1560 mm Tie bar spacing (H × W): 1010 × 1010 mm Min. / Max. mould height: 300 – 1190 mm Max. opening stroke: 2290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Injection volume: 4010 cm³ Shot weight (PS): 3690 g Tjdpfx Afoxyqyrj Tof Injection pressure: 1650 bar Max. injection speed: 400 mm/s Additional equipment Pneumatic valves – 4 pcs. Core pulls – 1 fixed / 1 moving Robot included: Sytrama 101 GL The machine is available for inspection and testing under power. Photos and demonstration videos available upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2011, Stork S+ 6600-5650 Injection Moulding Machine Control System: CDS700 Year of Manufacture: 2011 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial environment. Clamping Unit Clamping force: 6600 kN Platen dimensions (H × W): 1370 × 1370 mm Tie-bar spacing (H × W): 900 × 900 mm Min. / Max. mould height: 300 – 900 mm Maximum opening stroke: 1840 mm Locating ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2575 cm³ Shot weight (PS): 2369 g Injection pressure: 1650 bar Maximum injection speed: 500 mm/s Additional Equipment Tedpjxyqyfefx Af Tjf Pneumatic valves – 6 pcs. Core – 1 pc. The machine is available for inspection and testing under power. Photos and operational videos available upon request. We provide assistance with loading and transport arrangement.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of Manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate production. Perfectly suited for industrial manufacturing requiring high performance and reliability. Clamping Unit: Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Clearance between tie bars (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum opening stroke: 1150 mm Injection Unit: Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions & Weight: Length × width × height: 12.2 m Todpfsxyqxzox Af Tsf The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.