Used Chocolate Molding Machine for sale (64,437)

Year of construction: 2011, condition: good (used), Brand: Babyplast Model: 6/10P Year of manufacture: 2011 Itsdpfxex Rzbwe Ah Nob

Condition: used, Praline forming machine, praline shaper, -Conveyor belt missing -Chocolate forming machine -Execution: stable -Conveyor belt width: 110 mm -2x press rollers: Ø 145 mm Iododngv Ejpfx Ah Nstb -1x molded body: with ejection -1x machine with shape ellipse: approx. 20 x 35 mm -Transport dimensions: 1540/520/H1420 mm -Weight: 280 kg

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Itsdpsx Thzpofx Ah Njb Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial facility. The clamping force was factory-upgraded by Arburg to 3600 kN; the machine has received factory servicing. Clamping unit Clamping force: 3,600 kN Platen dimensions (H × W): 1,040 × 1,040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum mould height: 300 mm Maximum daylight opening: 1,400 mm Injection unit Screw diameter: 70 mm Shot volume: 1,078 cm³ Shot weight: 984 g Iedpfx Asx Thw Rsh Njtb Injection pressure: 2,000 bar Electrical–hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Dimensions and weight Net weight with control cabinet: 17 t

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine Year of manufacture: 2008 Robot: Wittmann Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and built-in 3 USB ports. Plasticizing unit: Complete abrasion-resistant plasticizing unit for thermoplastics, screw diameter 120 mm, with non-return valve and open nozzle. Technical data Clamping unit Clamping force: 11,000 kN Mold opening force: 770 kN Platen dimensions (H × V): 2,210 × 1,910 mm Tie bar spacing (H × V): 1,550 × 1,250 mm Mold opening stroke: 2,000 mm Mold height (min–max): 600 – 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Itedox Tgbhjpfx Ah Njb Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical and hydraulic equipment Pump motor rated power: 132 kW Installed heater capacity: 82 kW Number of barrel heating zones: 7 Number of dry cycles (Euromap): 802 1/h Oil tank capacity: 2,440 l Dimensions and weight Net weight with control cabinet: 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Moulding Machine Year of manufacture: 2004 Operating hours: 70,029 hours Screw: replaced in 2011 (reinforced – for special materials) Clamping unit Clamping force: 2,300 kN Platen dimensions (H × V): 2,900 × 2,500 mm Tie bar spacing (H × V): 2,000 × 1,600 mm Min./max. mould height: 700 – 1,890 mm Maximum opening stroke: 3,800 mm Isdpfx Ahjx Tf Iaj Njtb Injection unit Screw diameter: 135 mm Injection volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar Additional equipment Double injection capability Mould tilting option Magnetic platens 2 hydraulic cores 36 heating zones for the mould 10 hydraulic cascades (expandable) Interface languages: English, German Dimensions and weight Net weight (with control cabinet): 113 t + 18 t (total weight approx. 131,000 kg)

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Itedpfxex Tfyio Ah Nsb Weight: 43,000 kg

Condition: excellent (used), Year of construction: 2001, clamping force: 250 kN, screw diameter: 18 mm, displacement volume: 20 cm³, injection pressure: 2,500 bar, injection weight: 18 g, General information Year of manufacture: 2001 Control system: Selogica Weight: 2,000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m Clamping unit Clamping force: 25 t Tool clamping system: 250 / … Plate dimensions: 400 × 400 mm Clearance between tie bars: 220 × 220 mm Maximum distance between plates: 425 mm Injection unit Injection unit: … / 60 Itedjx Tfuyjpfx Ah Neb Screw diameter: 18 mm Screw L/D ratio: 24.5 Specific injection pressure: 2,500 bar Injection volume: 20 ccm Shot weight: 18 g Ejector Ejector force: 18 kN Ejector stroke: 95 mm

Condition: used, Year of construction: 2001, operating hours: 36,589 h, functionality: fully functional, clamping force: 450 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection weight: 80 g, mold height (min.): 180 mm, opening stroke: 350 mm, plate width: 550 mm, plate height: 330 mm, installation height: 350 mm, The Engel ES200/45 HL Victory machine can be inspected at any time; the machine is connected to power and fully operational. Tie-bar-less design. Itsdpfxox Ex Nbo Ah Neb

Condition: used, Year of construction: 2006, operating hours: 64,000 h, functionality: fully functional, machine/vehicle number: 200084, clamping force: 2,200 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection weight: 434 g, mold height (min.): 400 mm, opening stroke: 1,050 mm, overall weight: 8,500 kg, heating capacity: 14.9 kW (20.26 HP), pump power: 45,100 W, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: documentation/manual, CS series - LCD color screen - Selogica control system - Technology level 2 servo-driven with 2 variable displacement pumps - High wear-resistant plasticizing unit - Electric and hydraulic control of NVD in the mold for the 1st injection unit - Minimum installation height extended to 400 mm - Connection for air blow-off unit 1 - Core pull 1 - Core pull 2 - Injection pressure increased by 10% - HHG interface according to EUROMAP 67, 50-pin - Extended robot interface (EUROMAP 12 and 67) - Temperature control unit interface - Serial printer interface V24 - PC keyboard interface - Post-pressure switching channel 1 on the moving mold platen Itedpfjx Td Apsx Ah Nob - Interface for color separation units - 6 manually adjustable free cooling circuits - Arburg equipment package 1,2,3,5,6,7 - Injection control - Ejector plate locking connection - Centering diameter 175 mm through the moving clamping plate Completely overhauled by Makutec in 2020. In operation until CW2/2026.

Condition: excellent (used), Year of construction: 2010, operating hours: 78,394 h, functionality: fully functional, machine/vehicle number: 213142, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a specialist dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-kept injection moulding machines from the current year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2010 Operating hours: 78,394 h Screw and barrel replaced Machine number: 213142 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator valve - German language - Single owner - machine sourced from Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 tons Tie bar spacing: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Minimum mould height: 200 mm Maximum daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Itjdpfx Ahjx Rvcvo Neb Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2500 bar Electrical: Pump: 11 kW Heater: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty: Warranty up to initial commissioning Loading/Shipping: Free loaded onto buyer's truck or free delivery by arrangement with freight costs reimbursed. Available ex stock Hannover, Germany.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: We also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h (screw and barrel replaced) Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator chute - German language - Single ownership – origin Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit: - Clamping force: 400 kN / 40 t - Tie bar spacing: 270 x 270 mm - Platen size: 446 x 446 mm - Opening stroke: 350 mm - Minimum mould height: 200 mm - Maximum daylight between platens: 550 mm - Ejector stroke: 125 mm - Ejector force: max. 30 kN Injection unit: - Screw diameter: 18 mm - Injection volume: 23 cm³ - Shot weight: 21 g - Injection pressure: 2,500 bar Electrical: - Pump: 11 kW - Heaters: 4 zones, 4 kW - Installed power: 15 kW - Main fuse: 50A Weight: 2,150 kg Guarantee: Warranty until initial commissioning Loading/Shipping: Itjdpfx Ajx Rvcijh Njb Free loaded onto buyer’s truck or delivered to site against transport cost reimbursement Available ex stock Hanover, Germany Further information about our machines and company: - We only sell machines bought for our own stock from ongoing production, directly from our warehouse in Hanover - All machines offered are checked and tested before removal - We do NOT sell insolvency assets – we are NOT intermediaries dealing in third-party property - All machines offered come from successful companies where regular maintenance is a given - All listed machines can be inspected at our warehouse

Condition: used, Year of construction: 2011, operating hours: 63,500 h, clamping force: 6,500 kN, screw diameter: 90 mm, Injection moulding machine Manufacturer: Engel Model: duo 5550/650 pico Year of manufacture: 2011 Operating hours: approx. 63,500 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen. A TOTAL OF TWO IDENTICAL ENGEL 5550/650 DUO PICO MACHINES, YEAR 2011, ARE AVAILABLE FOR SALE AT THE SAME LOCATION! Itedpfx Asx R S Nfoh Neb _____ Our general terms and conditions apply; furthermore, the seller is not liable for typing or data transmission errors. All information and images were provided by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to business customers and without any warranty.

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C The machine is not connected. We sell the machine as described and as is * Itsdpfx Aju Nu N Rsh Neb

Year of construction: 2004, condition: used, Technical details: candle diameter: 21 mm candle length: 300 mm capacity: 1872 Stück/h heating-up temprerature: 70-120 °C cycle time: 13 sec candle material: Paraffin/Stearin control: Siemens S 5 space requirement of the machine approx.: ca.L:24 xB: 2 xH: 5,2 m Candle Production Plant / Candle Molding Machine - This plant is applied for the production of parafin/stearin candles according to the casting process with a high degree of automation. - Multicoloured candles can be produced and equipped with various mould boxes (e.g. cylindrical board candles or pointed candles). - production capacity: for max. theoretical maximum performance of 1872 pieces / h with a minimum cycle time of 23 seconds per mould box with 12 candles with 300 mm pointed candles and board candles with diameter of 21 mm, continuous operation approx. 1200 pieces / h Documentation available Itjdeu Nw S Ispfx Ah Njb Price on a negotiable basis! *

Condition: good (used), Year of construction: 1994, functionality: fully functional, Manufacturer: S.P.A Magic M.P. Model: MGL2D This blow molding machine is fully functional. It is still in production and can be inspected by appointment. Videos can be provided upon request. PRICE REDUCTION!!! From 21,000 to 19,000 EUR! Itjdpfoxxp Tbox Ah Njb

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: unexamined, machine/vehicle number: S/ NOS : 248534, 248535, 248536, clamping force: 3,800 kN, screw diameter: 60 mm, displacement volume: 877 cm³, injection weight: 300 g, ejector stroke: 210 mm, plate length: 1,140 mm, plate width: 1,140 mm, overall weight: 20,400 kg, type of input current: three-phase, input frequency: 60 Hz, input voltage: 480 V, year of last overhaul: 2024, number of digital displays: 1, Equipment: CE marking, documentation/manual, unit sold as is where is Two colors injection molding machine (two shots) Three machines available , price is per machine Manf. : Engel Austria Model : e-Motion 740H / 50MV / 420 T Combi US S/ NOS : 248534, 248535, 248536 Year Built : 12/2021 Condition : very good Material : THERMOPLAST Clamping Force : 420 Ton Injection Unit 1 : 740/. H-arrangement Injection Unit 2 : 50/. MV-arrangement Machine Net W : 20 400 Kg Itsdpfjx Szwhox Ah Nsb Gross Dim of crate : 23’ x 8’ 10” x 9’ 7” (H) Capacity : 427 Ton Shot Size : 10.2 oz Second Shot Size : 0.45 oz Tie Bar Spacing : 30.7" x 30.7" Platen Size : 44.89" x 44.89" Min /Max Mold Height : 45.3"/61" Clamp Stroke : 27.55" Ejector Stroke : 8.26" Control : CC300 Voltage : 480 Min/Max Mold Height : 43.3" - 61.02" 2-Shot Injection Molding Press Main Injection Unit: 10.2 oz (45mm) Secondary Vertical Injection Unit: .45 oz. (18mm) Core Pull Pneumatic Valve Gate Including: Engel Viper Robot

Condition: excellent (used), SCM contura in excellent condition Itsdpfet E T I Nox Ah Neb

Condition: ready for operation (used), Used machine Injection molding machine Manufacturer Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, available immediately Viewing possible by appointment The machine is no longer powered / No cooling water connection The machine is stored properly Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Bar spacing (mm) Installation height (mm) 250 Plate spacing (mm) 750 Control MC4 Screen text German Injection unit screw diameter (mm) 45 Injection pressure (bar) 1878 Displacement (cm³) 275 Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons Itjdpou Ti Srofx Ah Njb More photos on request.

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Itodpfx Aotltvzjh Nsb Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Condition: excellent (used), clamping force: 1,300 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, injection weight: 289 g, mold height (min.): 300 mm, General Data Model: Krauss Maffei KM 130/750 CX Year of manufacture: 2011 Ijdpfx Ajx S Hipjh Nstb Control system: MC5 Machine weight: 6,200 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m ⚙️ Injection Unit Unit: .../750 Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 289.4 g Specific injection pressure: 2,336 bar Screw L/D ratio: 22.4 🔩 Clamping Unit Clamping unit: 130/... Clamping force: 130 t Platen dimensions: 745 × 770 mm Tie bar spacing: 470 × 470 mm Mould height (min.): 300 mm Opening stroke: 600 mm Max. daylight: 900 mm Ejector force: 22.6 kN Ejector stroke: 150 mm 🧰 Additional Equipment - Hydraulic core - Pneumatic valve 4-section rotameters (2 pcs.)

Condition: good (used), Year of construction: 1989, functionality: fully functional, To preforms. Four-station rotary machine (injection, stretching, blowing, ejection) designed for producing PET, PP, PS, etc. containers (One-step ISBM). PET bottles 200–500 ml: 2,000–4,000 units/hour depending on cavity configuration and design. Compatible materials: PET, PP, PC, PS, PEN. Standard configuration: 4 stations, 1–2 injection cavities, 2–4 blow cavities. Injection clamping force: 80–100 t. Blow clamping force: 20–30 t. Total heating power: 28 kW. Main motor: 45 kW. Ijdox Swqqjpfx Ah Njtb

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201812185055532, Haitian Model / Type: JU8500 II Injection unit: 10600 Year of manufacture: 2018 Serial no.: 201812185055532 Connected load: 157 kW Clamping unit Clamping force: 1850 ton Tie bar spacing (H x V): 1650 x 1550 mm Min. mould height: 500 mm (750–150–100) Max. mould height: 1450 mm (1600–150) Centre ring adapter plate: 175 mm Core pulls: 4 Ejector Ejector force: 450 kN Injection unit Theoretical max. injection volume: 5227 cm³ Max. specific injection pressure: 2030 bar Screw diameter: 110 mm Screw type: Conventional, with mixing section Screw speed: 0–120 rpm Min. screw speed: 10.9 rpm Plasticising capacity (PS): 255 kg/h L/D ratio: 20 (reduced) Itedpfx Asx Stgueh Njb Nozzle radius: R39 Hydraulic / oil Oil tank capacity: 1560 litres Nozzle / bedplate Nozzle through-hole in bedplate: 100 mm Nozzle bore: 6 mm Weight & dimensions Machine weight: 94,000 kg Overall dimensions (L x W x H): 1450 x 965 x 360 cm Included Control system included Platforms and stairs included Safety crash protection included Product weights (reference) Min. shot weight (1/2D): 533 g 1D: 1066 g 2D: 2133 g Max. shot weight (3D): 3199 g Note Motan vacuum conveyor with cyclone separator not included; it must be dismantled and left on site.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201712075033692, Haitian Model / Type: JU7500/2 Plus Year of manufacture: 2018 Serial no.: 201712075033692 Clamping unit Clamping force: 750 ton Opening stroke: 900 mm Max. daylight: 2050 mm Tie bar spacing (H x V): 1110 x 960 mm Platen size: 1510 x 1440 mm Centre ring diameter: 200 mm Centre ring adapter plate: 175 mm Min. mould height: 450 mm Max. mould height: 1150 mm Open distance (open loopweg): 2050 mm Ejector Ejector stroke: 300 mm Ejector force: 195 kN Injection unit Theoretical max. injection volume: 2262 cm³ Max. shot weight in PS: 2058 g Max. specific injection pressure: 2200 bar Injection stroke: 450 mm Screw diameter: 80 mm Screw type: Conventional, with mixing section Screw speed: 0–145 rpm Min. screw speed: 15 rpm Plasticising capacity (PS): 255 kg/h Cylinder type: 5000 Hydraulic / electrical Hydraulic pressure: 210 bar Oil tank capacity: 1000 litres Power supply: 400 V Installed power: 86 kW Nozzle / bedplate Nozzle radius: R39 Nozzle through-hole in bedplate: 100 mm Nozzle bore: 6 mm Weight & dimensions Machine weight: 32 ton Overall dimensions (L x W x H): 970 x 510 x 270 cm Ijdpfox Stfwsx Ah Notb Included Control system included Platform and stairs included Safety crash protection included Product weights (reference) Min. shot weight (1/2D): 205 g 1D: 410 g 2D: 820 g Max. shot weight (3D): 1230 g Note: Motan vacuum conveyor with cyclone separator not included; it must be dismantled and left on site.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 161746, clamping force: 800 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, injection weight: 59 g, mold height (min.): 250 mm, opening stroke: 750 mm, total length: 4,300 mm, total width: 1,600 mm, total height: 2,014 mm, overall weight: 3,850 kg, heating capacity: 4.2 kW (5.71 HP), pump power: 22 W, power: 32 kW (43.51 HP), input frequency: 50 Hz, input voltage: 400 V, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. Iedjx Srizjpfx Ah Notb A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.